DWM3001C.E1.0SR
UWB Transceiver ModuleThe DWM3001C.E1.0SR is a uwb transceiver module from Qorvo. View the full DWM3001C.E1.0SR datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
DWM3001C.E1.0SR shares its datasheet with DWM3001, whose page lists every part number it covers.
Official DWM3001C.E1.0SR datasheet (PDF) — the source this page was extracted from.
Manufacturer
QorvoCategory
UWB Transceiver Module
DWM3001C.E1.0SR Key Specifications
| Parameter | Value |
|---|---|
| Packaging | Bag |
| Supply voltage VCC | 2.5–3.6 V |
| Operating temperature | -40 to +85 °C |
| Data rates | 850 kbps, 6.8 Mbps |
| Maximum packet length | 1023 bytes |
| Reference crystal | 38.4 MHz, trimmed to approximately 2 ppm initial error |
| MCU | ARM Cortex-M4, 64 MHz (nRF52833) |
| Transmit power adjustment | 2 dB coarse and 0.5 dB fine steps |
| Typical PSD limit setting for most regions | -41.3 dBm/MHz |
DWM3001C.E1.0SR Overview
Part: DWM3001C — Qorvo
Type: UWB Transceiver Module (DW3110 UWB IC + nRF52833 BLE MCU)
Description: Fully integrated IEEE 802.15.4z UWB module supporting Channels 5 (6.5 GHz) and 9 (8 GHz), with a Nordic nRF52833 Cortex-M4 MCU (BLE), accelerometer, planar UWB antenna and 6.8 Mbps maximum data rate, in a 48-pin 27.1 x 19.13 mm package.
Operating Conditions:
- Supply voltage: 2.5–3.6 V (VCC, per key features)
- Operating temperature: -40 to +85 °C
- UWB channels: 5 (6.5 GHz) and 9 (8 GHz); data rates 850 kbps and 6.8 Mbps
Absolute Maximum Ratings:
- Max supply voltage (VDD): 4.0 V (min -0.3 V)
- Max receiver power: 14 dBm
- Storage temperature: -40 to +125 °C
Key Specs:
- Supply voltage VCC: 2.5–3.6 V
- Operating temperature: -40 to +85 °C
- Data rates: 850 kbps, 6.8 Mbps
- Maximum packet length: 1023 bytes
- Reference crystal: 38.4 MHz, trimmed to approximately 2 ppm initial error
- MCU: ARM Cortex-M4, 64 MHz (nRF52833)
- Transmit power adjustment: 2 dB coarse and 0.5 dB fine steps
- Typical PSD limit setting for most regions: -41.3 dBm/MHz
Features:
- IEEE 802.15.4-2015 and IEEE 802.15.4z BPRF compliant
- Aligned with FiRa PHY, MAC and certification development
- Nordic nRF52833 SoC with BLE transceiver and Bluetooth chip antenna
- AES 128/256 security block
- Fully coherent receiver
- Factory calibrated crystal, transmit power and antenna delay
- Integrated ST LIS2DH12 3-axis accelerometer (I2C)
- Torex XC9282 DC-DC converter providing the 1.6 V supply
- Backward compatible with DWM1001C module
- FCC, SRRC and ETSI certification (planned)
Applications:
- Precision real-time location systems (RTLS) using two-way ranging or TDoA
- Location-aware wireless sensor networks (WSNs)
Package:
- 48-pin side-castellated module, 27.1 x 19.13 mm
- Ordering: DWM3001CSR (100 pcs reel), DWM3001CTR13 (500 pcs, 13" reel), DWM3001CDKE1.0 (development kit)
DWM3001C.E1.0SR Features
- IEEE 802.15.4-2015 and IEEE 802.15.4z BPRF compliant
- Fully aligned with FiRa™ PHY, MAC and certification development
- Supports Channels 5 (6.5 GHz) and 9 (8 GHz)
- FCC, SRRC and ETSI certification (planned)
- Nordic nRF52833 SoC with BLE transceiver
- Supply voltage VCC: 2.5 V - 3.6 V
- Bluetooth chip antenna
- AES 128/256 Security block
- Fully coherent receiver for maximum range and accuracy
- Power consumption optimized for battery applications
- Data rates of 850 kbps, 6.8 Mbps
- Maximum packet length of 1023 bytes for high data throughput applications
- Integrated MAC support features
- Backward compatible with the DWM1001C module
- Temperature range -40°C to +85°C
DWM3001C.E1.0SR Applications
- Precision real time location systems (RTLS) using two-way ranging or TDoA schemes in a variety of markets.
- Location aware wireless sensor networks (WSNs)
DWM3001C.E1.0SR Pin Configuration
Table 2: DWM3001C Pin Functions
| Signal Name | Pin | I/O (Default) | Description | IC Pin Reference |
|---|---|---|---|---|
| Digital Interface | Digital Interface | Digital Interface | Digital Interface | Digital Interface |
| SWD_CLK | 2 | DI | Serial wire debug clock input for debug and programming of nRF52833 processor. | [N] SWDCLK |
| SWD_DIO | 3 | DIO | Serial wire debug I/O for debug and programming of nRF52833 processor. | [N] SWDIO |
| P0.10 (NFC2) | 4 | Mixed | General purpose I/O for nRF52833 processor. NFC antenna connection. | [N] P0.10 |
| P0.09 (NFC1) | 5 | Mixed | General purpose I/O for nRF52833 processor. NFC antenna connection. | [N] P0.09 |
| P0.17 | 6 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.17 |
| P0.14 | 7 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.14 |
| P0.22 | 8 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.22 |
| P0.05 | 9 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.05 |
| P0.04 | 10 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.04 |
| P0.12 | 13 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.12 |
| I2C0_SDA | 14 | DIO | I2C data signal of nRF52833 processor and LIS12DH accelerometer. | [N] P0.24 |
| I2C0_SCL | 15 | DIO | I2C clock signal of nRF52833 processor and LIS12DH accelerometer. | [N] P1.04 |
| P0.21 | 16 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.21 |
| P0.20 | 17 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.20 |
| USB_N | 19 | DIO | USB D- I/O for nRF52833 processor. | [N] D- |
| USB_P | 20 | DIO | USB D+ I/O for nRF52833 processor. | [N] D+ |
| P0.11 | 22 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.11 |
| P1.08 | 23 | DIO | General purpose I/O for nRF52833 processor. | [N] P1.08 |
| P0.06 | 24 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.06 |
| P1.01 | 25 | DIO | General purpose I/O for nRF52833 processor. | [N] P1.01 |
| P0.13 | 26 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.13 |
| P1.09 | 27 | DIO | General purpose I/O for nRF52833 processor. | [N] P1.09 |
| P1.00 | 28 | DIO | General purpose I/O for nRF52833 processor. | [N] P1.00 |
| P1.05 | 29 | DIO | General purpose I/O for nRF52833 processor. | [N] P1.05 |
| DW_GP5 | 30 | DIO | General purpose I/O for DW3110 transceiver. | [D] GPIO5 |
| DW_GP6 | 31 | DIO | General purpose I/O for DW3110 transceiver. | [D] GPIO6 |
| P0.15 | 32 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.15 |
| P0.28 | 33 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.28 |
| P0.19 | 34 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.19 |
| DW_GP1 | 35 | DIO | General purpose I/O for DW3110 transceiver. | [D] GPIO1 |
| DW_GP0 | 36 | DIO | General purpose I/O for DW3110 transceiver. | [D] GPIO0 |
| P0.26 | 37 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.26 |
| P0.23 | 39 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.23 |
Table 2: DWM3001C Pin Functions
| Signal Name | Pin | I/O (Default) | Description | IC Pin Reference |
|---|---|---|---|---|
| P0.07 | 40 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.07 |
| P0.27 | 41 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.27 |
| P0.31 | 42 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.31 |
| P0.30 | 43 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.30 |
| DW_GPIO3 | 44 | DIO | General purpose I/O for DW3110 transceiver. | [D] GPIO3 |
| DW_GPIO2 | 45 | DIO | General purpose I/O for DW3110 transceiver. | [D] GPIO2 |
| P0.02 | 46 | DIO | General purpose I/O for nRF52833 processor. | [N] P0.02 |
| RESET (P0.18) | 47 | DIO | General purpose I/O for nRF52833 processor. Active-low reset input. | [N] nRESET |
| Power Supplies | Power Supplies | Power Supplies | Power Supplies | |
| VDD | 12 | P | 3 V supply pin. | |
| Ground | Ground | Ground | Ground | |
| GND | 1, 11, 21, 38, 48 | G | Common ground. |
Table 3: Explanation of Abbreviations
| Abbreviation | Explanation |
|---|---|
| I | Input |
| IO | Input / Output |
| O | Output |
| G | Ground |
| P | Power Supply |
| PD | Power Decoupling |
| O-L | Defaults to output, low level after reset |
| O-H | Defaults to output, high level after reset |
| I | Defaults to input. |
Note: Any signal with the suffix 'n' indicates an active low signal.
Table 3: Explanation of Abbreviations
DWM3001C.E1.0SR Electrical Characteristics
Tamb = 25 ˚C, all supplies centered on typical values
Table 5: DWM3001C DC Characteristics
| Parameter | Min. | Typ. | Max. | Units | Condition / Note |
|---|---|---|---|---|---|
| Supply current SLEEP mode | 850 | nA | |||
| Supply current CH5 IDLE mode | 18 | mA | |||
| Supply current CH9 IDLE mode | 32 | mA | |||
| Supply current CH5 INIT mode | 6 | mA | |||
| Supply current CH9 INIT mode | 6 | mA | |||
| CH5 TX: VDD | 40 | mA | Continuous frame transmission | ||
| CH9 TX: VDD | 45 | mA | Continuous frame transmission | ||
| CH5 RX: VDD | 40 | mA | Receiver active, no frames received | ||
| CH9 RX: VDD | 45 | mA | Receiver active, no frames received | ||
| Digital input voltage high | 0.7*VDD1 | V | |||
| Digital input voltage low | 0.3*VDD1 | V | |||
| Digital output voltage high | 0.7*VDD1 | V | Assumes 500 Ω load | ||
| Digital output voltage low | 0.3*VDD1 | V | Assumes 500 Ω load | ||
| Digital Output Drive Current GPIOx, IRQ | 0.8 | mA | |||
| Digital Output Drive Current SPIMISO | 8 | 10 | mA | ||
| Digital Output Drive Current EXTON | 3 | 4 | mA |
DWM3001C.E1.0SR Absolute Maximum Ratings
Table 9: DWM3001C Absolute Maximum Ratings
| Parameter | Min. | Max. | Units |
|---|---|---|---|
| Voltage, VDD | -0.3 | 4.0 | V |
| Receiver Power | 14 | dBm | |
| Temperature - Storage temperature | -40 | +125 | ˚C |
| Temperature - Operating temperature | -40 | +85 | ˚C |
Stresses beyond those listed in this table may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions beyond those indicated in the operating conditions of the specification is not implied. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability.
10 of 27
DWM3001C.E1.0SR Package Information
The diagram below shows the DWM3001C module land pattern.
Figure 5: Module Land Pattern (mm)
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| DWM3001 | Qorvo | — |
| DWM3001C | Qorvo | Module |
| DWM3001C.E1.0SB | Qorvo | — |
| DWM3001C.E1.0SQ | Qorvo | — |
| DWM3001CDK | Qorvo | |
| DWM3001CDKE1.0 | Qorvo | Development kit |
| DWM3001CSR | Qorvo | Module |
| DWM3001CTR13 | Qorvo | 48-SMD Module |
More datasheets
Ask your AI agent about the DWM3001C.E1.0SR
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the DWM3001C.E1.0SR run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.