Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

DWM3001C

UWB Transceiver Module

The DWM3001C is a uwb transceiver module from Qorvo. View the full DWM3001C datasheet below including key specifications, pinout, electrical characteristics, absolute maximum ratings.

DWM3001C shares its datasheet with DWM3001, whose page lists every part number it covers.

Official DWM3001C datasheet (PDF) — the source this page was extracted from.

Manufacturer

Qorvo

Category

UWB Transceiver Module

Package

Module, Development kit

DWM3001C Key Specifications

ParameterValue
PackagingBag
Host MCUNordic nRF52833 SoC with BLE
SecurityAES 128/256
Pin Count48
StandardsIEEE 802.15.4-2015, IEEE 802.15.4z BPRF, FiRa PHY/MAC
Data Rates850 kbps, 6.8 Mbps
UWB ChannelsChannel 5 (6.5 GHz) and Channel 9 (8 GHz)
AccelerometerST LIS2DH
Package Dimensions27.1 x 19.13 mm
UWB Transceiver ICQorvo DW3110
Supply Voltage (VCC)2.5V to 3.6V
Maximum Packet Length1023 bytes
Operating Temperature-40°C to +85°C
TX Power Adjustment Steps2 dB coarse, 0.5 dB fine
Crystal Initial Frequency Trim<2 ppm typical
Transmit PSD Max (Most Regions)-41.3 dBm/MHz

DWM3001C Overview

Part: DWM3001C — Qorvo

Type: UWB Transceiver Module (DW3110 UWB IC + nRF52833 BLE MCU)

Description: Fully integrated IEEE 802.15.4z UWB module supporting Channels 5 (6.5 GHz) and 9 (8 GHz), with a Nordic nRF52833 Cortex-M4 MCU (BLE), accelerometer, planar UWB antenna and 6.8 Mbps maximum data rate, in a 48-pin 27.1 x 19.13 mm package.

Operating Conditions:

  • Supply voltage: 2.5–3.6 V (VCC, per key features)
  • Operating temperature: -40 to +85 °C
  • UWB channels: 5 (6.5 GHz) and 9 (8 GHz); data rates 850 kbps and 6.8 Mbps

Absolute Maximum Ratings:

  • Max supply voltage (VDD): 4.0 V (min -0.3 V)
  • Max receiver power: 14 dBm
  • Storage temperature: -40 to +125 °C

Key Specs:

  • Supply voltage VCC: 2.5–3.6 V
  • Operating temperature: -40 to +85 °C
  • Data rates: 850 kbps, 6.8 Mbps
  • Maximum packet length: 1023 bytes
  • Reference crystal: 38.4 MHz, trimmed to approximately 2 ppm initial error
  • MCU: ARM Cortex-M4, 64 MHz (nRF52833)
  • Transmit power adjustment: 2 dB coarse and 0.5 dB fine steps
  • Typical PSD limit setting for most regions: -41.3 dBm/MHz

Features:

  • IEEE 802.15.4-2015 and IEEE 802.15.4z BPRF compliant
  • Aligned with FiRa PHY, MAC and certification development
  • Nordic nRF52833 SoC with BLE transceiver and Bluetooth chip antenna
  • AES 128/256 security block
  • Fully coherent receiver
  • Factory calibrated crystal, transmit power and antenna delay
  • Integrated ST LIS2DH12 3-axis accelerometer (I2C)
  • Torex XC9282 DC-DC converter providing the 1.6 V supply
  • Backward compatible with DWM1001C module
  • FCC, SRRC and ETSI certification (planned)

Applications:

  • Precision real-time location systems (RTLS) using two-way ranging or TDoA
  • Location-aware wireless sensor networks (WSNs)

Package:

  • 48-pin side-castellated module, 27.1 x 19.13 mm
  • Ordering: DWM3001CSR (100 pcs reel), DWM3001CTR13 (500 pcs, 13" reel), DWM3001CDKE1.0 (development kit)

DWM3001C Features

  • IEEE 802.15.4-2015 and IEEE 802.15.4z BPRF compliant
  • Fully aligned with FiRa™ PHY, MAC and certification development
  • Supports Channels 5 (6.5 GHz) and 9 (8 GHz)
  • FCC, SRRC and ETSI certification (planned)
  • Nordic nRF52833 SoC with BLE transceiver
  • Supply voltage VCC: 2.5 V - 3.6 V
  • Bluetooth chip antenna
  • AES 128/256 Security block
  • Fully coherent receiver for maximum range and accuracy
  • Power consumption optimized for battery applications
  • Data rates of 850 kbps, 6.8 Mbps
  • Maximum packet length of 1023 bytes for high data throughput applications
  • Integrated MAC support features
  • Backward compatible with the DWM1001C module
  • Temperature range -40°C to +85°C

DWM3001C Applications

  • Precision real time location systems (RTLS) using two-way ranging or TDoA schemes in a variety of markets.
  • Location aware wireless sensor networks (WSNs)

DWM3001C Pin Configuration

PinNameTypeDescription
1GNDGCommon ground.
2SWD_CLKDISerial wire debug clock input for debug and programming of nRF52833 processor.
3SWD_DIODIOSerial wire debug I/O for debug and programming of nRF52833 processor.
4P0.10 (NFC2)MixedGeneral purpose I/O for nRF52833 processor. NFC antenna connection.
5P0.09 (NFC1)MixedGeneral purpose I/O for nRF52833 processor. NFC antenna connection.
6P0.17DIOGeneral purpose I/O for nRF52833 processor.
7P0.14DIOGeneral purpose I/O for nRF52833 processor.
8P0.22DIOGeneral purpose I/O for nRF52833 processor.
9P0.05DIOGeneral purpose I/O for nRF52833 processor.
10P0.04DIOGeneral purpose I/O for nRF52833 processor.
11GNDGCommon ground.
12VDDP3 V supply pin.
13P0.12DIOGeneral purpose I/O for nRF52833 processor.
14I2C0_SDADIOI2C data signal of nRF52833 processor and LIS12DH accelerometer.
15I2C0_SCLDIOI2C clock signal of nRF52833 processor and LIS12DH accelerometer.
16P0.21DIOGeneral purpose I/O for nRF52833 processor.
17P0.20DIOGeneral purpose I/O for nRF52833 processor.
18VUSB-
19USB_NDIOUSB D- I/O for nRF52833 processor.
20USB_PDIOUSB D+ I/O for nRF52833 processor.
21GNDGCommon ground.
22P0.11DIOGeneral purpose I/O for nRF52833 processor.
23P1.08DIOGeneral purpose I/O for nRF52833 processor.
24P0.06DIOGeneral purpose I/O for nRF52833 processor.
25P1.01DIOGeneral purpose I/O for nRF52833 processor.
26P0.13DIOGeneral purpose I/O for nRF52833 processor.
27P1.09DIOGeneral purpose I/O for nRF52833 processor.
28P1.00DIOGeneral purpose I/O for nRF52833 processor.
29P1.05DIOGeneral purpose I/O for nRF52833 processor.
30DW_GP5DIOGeneral purpose I/O for DW3110 transceiver.
31DW_GP6DIOGeneral purpose I/O for DW3110 transceiver.
32P0.15DIOGeneral purpose I/O for nRF52833 processor.
33P0.28DIOGeneral purpose I/O for nRF52833 processor.
34P0.19DIOGeneral purpose I/O for nRF52833 processor.
35DW_GP1DIOGeneral purpose I/O for DW3110 transceiver.
36DW_GP0DIOGeneral purpose I/O for DW3110 transceiver.
37P0.26DIOGeneral purpose I/O for nRF52833 processor.
38GNDGCommon ground.
39P0.23DIOGeneral purpose I/O for nRF52833 processor.
40P0.07DIOGeneral purpose I/O for nRF52833 processor.
41P0.27DIOGeneral purpose I/O for nRF52833 processor.
42P0.31DIOGeneral purpose I/O for nRF52833 processor.
43P0.30DIOGeneral purpose I/O for nRF52833 processor.
44DW_GPIO3DIOGeneral purpose I/O for DW3110 transceiver.
45DW_GPIO2DIOGeneral purpose I/O for DW3110 transceiver.
46P0.02DIOGeneral purpose I/O for nRF52833 processor.
47RESETDIOGeneral purpose I/O for nRF52833 processor. Active-low reset input. (alt: P0.18)
48GNDGCommon ground.

DWM3001C Electrical Characteristics

Tamb = 25 ˚C, all supplies centered on typical values

Table 5: DWM3001C DC Characteristics

ParameterMin.Typ.Max.UnitsCondition / Note
Supply current SLEEP mode850nA
Supply current CH5 IDLE mode18mA
Supply current CH9 IDLE mode32mA
Supply current CH5 INIT mode6mA
Supply current CH9 INIT mode6mA
CH5 TX: VDD40mAContinuous frame transmission
CH9 TX: VDD45mAContinuous frame transmission
CH5 RX: VDD40mAReceiver active, no frames received
CH9 RX: VDD45mAReceiver active, no frames received
Digital input voltage high0.7*VDD1V
Digital input voltage low0.3*VDD1V
Digital output voltage high0.7*VDD1VAssumes 500 Ω load
Digital output voltage low0.3*VDD1VAssumes 500 Ω load
Digital Output Drive Current GPIOx, IRQ0.8mA
Digital Output Drive Current SPIMISO810mA
Digital Output Drive Current EXTON34mA

DWM3001C Absolute Maximum Ratings

Table 9: DWM3001C Absolute Maximum Ratings

ParameterMin.Max.Units
Voltage, VDD-0.34.0V
Receiver Power14dBm
Temperature - Storage temperature-40+125˚C
Temperature - Operating temperature-40+85˚C

Stresses beyond those listed in this table may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions beyond those indicated in the operating conditions of the specification is not implied. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability.

10 of 27

DWM3001C Package Information

The diagram below shows the DWM3001C module land pattern.

Figure 5: Module Land Pattern (mm)

DWM3001C Ordering Information

Part NumberDescriptionPackageTemperature RangePacking
DWM3001CSRModule - 100 pcs reelModulenull100 pcs reel
DWM3001CTR13Module - 500 pcs on 13" reelModulenull500 pcs on 13" reel
DWM3001CDKE1.0Engineering Development kitDevelopment kitnullnull

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
DWM3001Qorvo—
DWM3001C.E1.0SBQorvo—
DWM3001C.E1.0SQQorvo—
DWM3001C.E1.0SRQorvo—
DWM3001CDKQorvo
DWM3001CDKE1.0QorvoDevelopment kit
DWM3001CSRQorvoModule
DWM3001CTR13Qorvo48-SMD Module

More datasheets

All Qorvo datasheets (11)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the DWM3001C

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the DWM3001C run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.