Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

DWM3001

UWB Transceiver Module

The DWM3001 is a uwb transceiver module from Qorvo. View the full DWM3001 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

Official DWM3001 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Qorvo

Category

UWB Transceiver Module

DWM3001 Key Specifications

ParameterValue
PackagingBag
Supply voltage VCC2.5–3.6 V
Operating temperature-40 to +85 °C
Data rates850 kbps, 6.8 Mbps
Maximum packet length1023 bytes
Reference crystal38.4 MHz, trimmed to approximately 2 ppm initial error
MCUARM Cortex-M4, 64 MHz (nRF52833)
Transmit power adjustment2 dB coarse and 0.5 dB fine steps
Typical PSD limit setting for most regions-41.3 dBm/MHz

DWM3001 Overview

Part: DWM3001C — Qorvo

Type: UWB Transceiver Module (DW3110 UWB IC + nRF52833 BLE MCU)

Description: Fully integrated IEEE 802.15.4z UWB module supporting Channels 5 (6.5 GHz) and 9 (8 GHz), with a Nordic nRF52833 Cortex-M4 MCU (BLE), accelerometer, planar UWB antenna and 6.8 Mbps maximum data rate, in a 48-pin 27.1 x 19.13 mm package.

Operating Conditions:

  • Supply voltage: 2.5–3.6 V (VCC, per key features)
  • Operating temperature: -40 to +85 °C
  • UWB channels: 5 (6.5 GHz) and 9 (8 GHz); data rates 850 kbps and 6.8 Mbps

Absolute Maximum Ratings:

  • Max supply voltage (VDD): 4.0 V (min -0.3 V)
  • Max receiver power: 14 dBm
  • Storage temperature: -40 to +125 °C

Key Specs:

  • Supply voltage VCC: 2.5–3.6 V
  • Operating temperature: -40 to +85 °C
  • Data rates: 850 kbps, 6.8 Mbps
  • Maximum packet length: 1023 bytes
  • Reference crystal: 38.4 MHz, trimmed to approximately 2 ppm initial error
  • MCU: ARM Cortex-M4, 64 MHz (nRF52833)
  • Transmit power adjustment: 2 dB coarse and 0.5 dB fine steps
  • Typical PSD limit setting for most regions: -41.3 dBm/MHz

Features:

  • IEEE 802.15.4-2015 and IEEE 802.15.4z BPRF compliant
  • Aligned with FiRa PHY, MAC and certification development
  • Nordic nRF52833 SoC with BLE transceiver and Bluetooth chip antenna
  • AES 128/256 security block
  • Fully coherent receiver
  • Factory calibrated crystal, transmit power and antenna delay
  • Integrated ST LIS2DH12 3-axis accelerometer (I2C)
  • Torex XC9282 DC-DC converter providing the 1.6 V supply
  • Backward compatible with DWM1001C module
  • FCC, SRRC and ETSI certification (planned)

Applications:

  • Precision real-time location systems (RTLS) using two-way ranging or TDoA
  • Location-aware wireless sensor networks (WSNs)

Package:

  • 48-pin side-castellated module, 27.1 x 19.13 mm
  • Ordering: DWM3001CSR (100 pcs reel), DWM3001CTR13 (500 pcs, 13" reel), DWM3001CDKE1.0 (development kit)

DWM3001 Features

  • IEEE 802.15.4-2015 and IEEE 802.15.4z BPRF compliant
  • Fully aligned with FiRa™ PHY, MAC and certification development
  • Supports Channels 5 (6.5 GHz) and 9 (8 GHz)
  • FCC, SRRC and ETSI certification (planned)
  • Nordic nRF52833 SoC with BLE transceiver
  • Supply voltage VCC: 2.5 V - 3.6 V
  • Bluetooth chip antenna
  • AES 128/256 Security block
  • Fully coherent receiver for maximum range and accuracy
  • Power consumption optimized for battery applications
  • Data rates of 850 kbps, 6.8 Mbps
  • Maximum packet length of 1023 bytes for high data throughput applications
  • Integrated MAC support features
  • Backward compatible with the DWM1001C module
  • Temperature range -40°C to +85°C

DWM3001 Applications

  • Precision real time location systems (RTLS) using two-way ranging or TDoA schemes in a variety of markets.
  • Location aware wireless sensor networks (WSNs)

DWM3001 Pin Configuration

Table 2: DWM3001C Pin Functions

Signal NamePinI/O (Default)DescriptionIC Pin Reference
Digital InterfaceDigital InterfaceDigital InterfaceDigital InterfaceDigital Interface
SWD_CLK2DISerial wire debug clock input for debug and programming of nRF52833 processor.[N] SWDCLK
SWD_DIO3DIOSerial wire debug I/O for debug and programming of nRF52833 processor.[N] SWDIO
P0.10 (NFC2)4MixedGeneral purpose I/O for nRF52833 processor. NFC antenna connection.[N] P0.10
P0.09 (NFC1)5MixedGeneral purpose I/O for nRF52833 processor. NFC antenna connection.[N] P0.09
P0.176DIOGeneral purpose I/O for nRF52833 processor.[N] P0.17
P0.147DIOGeneral purpose I/O for nRF52833 processor.[N] P0.14
P0.228DIOGeneral purpose I/O for nRF52833 processor.[N] P0.22
P0.059DIOGeneral purpose I/O for nRF52833 processor.[N] P0.05
P0.0410DIOGeneral purpose I/O for nRF52833 processor.[N] P0.04
P0.1213DIOGeneral purpose I/O for nRF52833 processor.[N] P0.12
I2C0_SDA14DIOI2C data signal of nRF52833 processor and LIS12DH accelerometer.[N] P0.24
I2C0_SCL15DIOI2C clock signal of nRF52833 processor and LIS12DH accelerometer.[N] P1.04
P0.2116DIOGeneral purpose I/O for nRF52833 processor.[N] P0.21
P0.2017DIOGeneral purpose I/O for nRF52833 processor.[N] P0.20
USB_N19DIOUSB D- I/O for nRF52833 processor.[N] D-
USB_P20DIOUSB D+ I/O for nRF52833 processor.[N] D+
P0.1122DIOGeneral purpose I/O for nRF52833 processor.[N] P0.11
P1.0823DIOGeneral purpose I/O for nRF52833 processor.[N] P1.08
P0.0624DIOGeneral purpose I/O for nRF52833 processor.[N] P0.06
P1.0125DIOGeneral purpose I/O for nRF52833 processor.[N] P1.01
P0.1326DIOGeneral purpose I/O for nRF52833 processor.[N] P0.13
P1.0927DIOGeneral purpose I/O for nRF52833 processor.[N] P1.09
P1.0028DIOGeneral purpose I/O for nRF52833 processor.[N] P1.00
P1.0529DIOGeneral purpose I/O for nRF52833 processor.[N] P1.05
DW_GP530DIOGeneral purpose I/O for DW3110 transceiver.[D] GPIO5
DW_GP631DIOGeneral purpose I/O for DW3110 transceiver.[D] GPIO6
P0.1532DIOGeneral purpose I/O for nRF52833 processor.[N] P0.15
P0.2833DIOGeneral purpose I/O for nRF52833 processor.[N] P0.28
P0.1934DIOGeneral purpose I/O for nRF52833 processor.[N] P0.19
DW_GP135DIOGeneral purpose I/O for DW3110 transceiver.[D] GPIO1
DW_GP036DIOGeneral purpose I/O for DW3110 transceiver.[D] GPIO0
P0.2637DIOGeneral purpose I/O for nRF52833 processor.[N] P0.26
P0.2339DIOGeneral purpose I/O for nRF52833 processor.[N] P0.23

Table 2: DWM3001C Pin Functions

Signal NamePinI/O (Default)DescriptionIC Pin Reference
P0.0740DIOGeneral purpose I/O for nRF52833 processor.[N] P0.07
P0.2741DIOGeneral purpose I/O for nRF52833 processor.[N] P0.27
P0.3142DIOGeneral purpose I/O for nRF52833 processor.[N] P0.31
P0.3043DIOGeneral purpose I/O for nRF52833 processor.[N] P0.30
DW_GPIO344DIOGeneral purpose I/O for DW3110 transceiver.[D] GPIO3
DW_GPIO245DIOGeneral purpose I/O for DW3110 transceiver.[D] GPIO2
P0.0246DIOGeneral purpose I/O for nRF52833 processor.[N] P0.02
RESET (P0.18)47DIOGeneral purpose I/O for nRF52833 processor. Active-low reset input.[N] nRESET
Power SuppliesPower SuppliesPower SuppliesPower Supplies
VDD12P3 V supply pin.
GroundGroundGroundGround
GND1, 11, 21, 38, 48GCommon ground.

Table 3: Explanation of Abbreviations

AbbreviationExplanation
IInput
IOInput / Output
OOutput
GGround
PPower Supply
PDPower Decoupling
O-LDefaults to output, low level after reset
O-HDefaults to output, high level after reset
IDefaults to input.

Note: Any signal with the suffix 'n' indicates an active low signal.

Table 3: Explanation of Abbreviations

DWM3001 Electrical Characteristics

Tamb = 25 ˚C, all supplies centered on typical values

Table 5: DWM3001C DC Characteristics

ParameterMin.Typ.Max.UnitsCondition / Note
Supply current SLEEP mode850nA
Supply current CH5 IDLE mode18mA
Supply current CH9 IDLE mode32mA
Supply current CH5 INIT mode6mA
Supply current CH9 INIT mode6mA
CH5 TX: VDD40mAContinuous frame transmission
CH9 TX: VDD45mAContinuous frame transmission
CH5 RX: VDD40mAReceiver active, no frames received
CH9 RX: VDD45mAReceiver active, no frames received
Digital input voltage high0.7*VDD1V
Digital input voltage low0.3*VDD1V
Digital output voltage high0.7*VDD1VAssumes 500 Ω load
Digital output voltage low0.3*VDD1VAssumes 500 Ω load
Digital Output Drive Current GPIOx, IRQ0.8mA
Digital Output Drive Current SPIMISO810mA
Digital Output Drive Current EXTON34mA

DWM3001 Absolute Maximum Ratings

Table 9: DWM3001C Absolute Maximum Ratings

ParameterMin.Max.Units
Voltage, VDD-0.34.0V
Receiver Power14dBm
Temperature - Storage temperature-40+125˚C
Temperature - Operating temperature-40+85˚C

Stresses beyond those listed in this table may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions beyond those indicated in the operating conditions of the specification is not implied. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability.

10 of 27

DWM3001 Package Information

The diagram below shows the DWM3001C module land pattern.

Figure 5: Module Land Pattern (mm)

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
DWM3001CQorvoModule
DWM3001C.E1.0SBQorvo—
DWM3001C.E1.0SQQorvo—
DWM3001C.E1.0SRQorvo—
DWM3001CDKQorvo
DWM3001CDKE1.0QorvoDevelopment kit
DWM3001CSRQorvoModule
DWM3001CTR13Qorvo48-SMD Module

More datasheets

All Qorvo datasheets (11)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the DWM3001

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the DWM3001 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.