Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

DRV5023FA

Digital-Switch Hall Effect Sensor

The DRV5023FA is a digital-switch hall effect sensor from Texas Instruments. View the full DRV5023FA datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

DRV5023FA shares its datasheet with DRV5023, whose page lists every part number it covers.

Official DRV5023FA datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Sensors

DRV5023FA Key Specifications

ParameterValue
Current - Output (Max)30mA
Supply Current (Max)2.7mA (Typ)
FeaturesTemperature Compensated
FunctionUnipolar Switch
Mounting TypeSurface Mount
Operating Temperature-40°C ~ 125°C (TA)
Output TypeOpen Drain
Package / CaseTO-236-3, SC-59, SOT-23-3
PackagingMouseReel
PolarizationSouth Pole
Sensing Range24mT Trip, 3mT Release
Standard Pack Qty3000
Supplier Device PackageSOT-23-3
Diode TechnologyHall Effect
Test Condition-40°C ~ 125°C
Supply Voltage2.5V ~ 38V

DRV5023FA Overview

Part: DRV5023BIQDBZR — Texas Instruments

Type: Digital Unipolar-Switch Hall Effect Sensor

Description: 2.5–38 V, chopper-stabilized unipolar Hall effect switch with open-drain output (30 mA sink), ±10% sensitivity over temperature, and BI sensitivity option (BOP / BRP = 14.5 / 6 mT) in a 3-pin SOT-23 package.

Operating Conditions:

  • Supply voltage: 2.5–38 V
  • Operating temperature: -40 to 125 °C (TA)
  • Output pin voltage: 0–38 V
  • Output sink current: 0–30 mA

Absolute Maximum Ratings:

  • Power supply voltage (VCC): -22 to 40 V
  • Output pin voltage: -0.5 to 40 V
  • Output pin reverse current during reverse supply condition: 100 mA max
  • Operating junction temperature: -40 to 150 °C
  • Storage temperature: -65 to 150 °C

Key Specs:

  • Supply current ICC: 2.7 mA typ (TA = 25 °C); 3 mA typ, 3.5 mA max (TA = 125 °C)
  • Power-on time (AJ, BI versions): 35 μs typ, 50 μs max
  • FET on-resistance rDS(on): 22 Ω typ at 25 °C; 36 Ω typ, 50 Ω max at 125 °C (VCC = 3.3 V, IO = 10 mA)
  • Off-state leakage current: 1 μA max
  • Overcurrent protection level IOCP: 15 / 30 / 45 mA (min/typ/max), OUT shorted to VCC
  • Output delay time: 13–25 μs
  • Output rise / fall time: 200 ns / 31 ns (R1 = 1 kΩ, CO = 50 pF, VCC = 3.3 V)
  • Bandwidth: 20 kHz min, 30 kHz typ
  • Thermal resistance RθJA (SOT-23): 333.2 °C/W

Features:

  • Digital unipolar-switch Hall sensor
  • Sensitivity ±10% over temperature
  • BI option thresholds: BOP / BRP = 14.5 / 6 mT
  • No external regulator required
  • Open-drain output with 30 mA sink
  • Reverse supply protection down to -22 V
  • Supports up to 40 V load dump
  • Output short-circuit protection and current limitation
  • ESD: HBM ±2500 V, CDM ±500 V

Applications:

  • Docking detection
  • Door open and close detection
  • Proximity sensing
  • Valve positioning
  • Pulse counting

Package:

  • SOT-23 (DBZ), 3 pins, 2.92 mm × 1.30 mm body
  • TO-92 (LPG), 3 pins, 4.00 mm × 3.15 mm (other variant of the DRV5023 family)

DRV5023FA Features

  • 1 · Digital Unipolar-Switch Hall Sensor
  • Superior Temperature Stability
  • -Sensitivity ±10% Over Temperature
  • Multiple Sensitivity Options (BOP / BRP):
  • -3.5 / 2 mT (FA, see Figure 24)
  • -6.9 / 3.2 mT (AJ, see Figure 24)
  • -14.5 / 6 mT (BI, see Figure 24)
  • Supports a Wide Voltage Range
  • -2.5 to 38 V
  • -No External Regulator Required
  • Wide Operating Temperature Range
  • -TA = -40 to 125°C (Q, see Figure 24)
  • Open Drain Output (30-mA Sink)
  • Fast 35-μs Power-On Time
  • Small Package and Footprint
  • -Surface Mount 3-Pin SOT-23 (DBZ)
  • -2.92 mm × 2.37 mm
  • -Through-Hole 3-Pin TO-92 (LPG)
  • -4.00 mm × 3.15 mm

DRV5023FA Applications

  • Docking Detection
  • Door Open and Close Detection
  • Proximity Sensing
  • Valve Positioning
  • Pulse Counting

DRV5023FA Pin Configuration

For additional configuration information, see Device Markings and Mechanical, Packaging, and Orderable Information .

DRV5023FA Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)

PARAMETERPARAMETERTEST CONDITIONSMINTYPMAXUNIT
POWER SUPPLIES (V CC )POWER SUPPLIES (V CC )
V CCV CC operating voltage2.538V
I CCOperating supply currentV CC = 2.5 to 38 V, T A = 25°C2.7mA
I CCOperating supply currentV CC = 2.5 to 38 V, T A = 125°C33.5mA
t onPower-on timeAJ, BI versions3550μs
t onPower-on timeFA version3570μs
OPEN DRAIN OUTPUT (OUT)OPEN DRAIN OUTPUT (OUT)
r DS(on)FET on-resistanceV CC = 3.3 V, I O = 10 mA, T A = 25°C22Ω
r DS(on)FET on-resistanceV CC = 3.3 V, I O = 10 mA, T A = 125°C3650Ω
I lkg(off)Off-state leakage currentOutput Hi-Z1μA
PROTECTION CIRCUITSPROTECTION CIRCUITS
V CCRReverse supply voltage-22V
I OCPOvercurrent protection levelOUT shorted V CC153045mA

DRV5023FA Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1)

MINMAXUNIT
Power supply voltageV CC-22 (2)40V
Voltage ramp rate (V CC ), V CC < 5 VUnlimitedUnlimitedV/μs
Voltage ramp rate (V CC ), V CC > 5 V02V/μs
Output pin voltageOutput pin voltage-0.540V
Output pin reverse current during reverse supply conditionOutput pin reverse current during reverse supply condition0100mA
Magnetic flux density, B MAXMagnetic flux density, B MAXUnlimitedUnlimited
Operating junction temperature, T JOperating junction temperature, T J-40150°C
Storage temperature, T stgStorage temperature, T stg-65150°C

over operating free-air temperature range (unless otherwise noted)

MINMAXUNIT
V CCPower supply voltage2.538V
V OOutput pin voltage (OUT)038V
I SINKOutput pin current sink (OUT) (1)030mA
T AOperating ambient temperature-40125°C

DRV5023FA Thermal Information

THERMAL METRIC(1)DRV5023 - DBZ (SOT-23) - 3 PINSDRV5023 - LPG (TO-92) - 3 PINSUNIT
R θ JAJunction-to-ambient thermal resistance333.2180°C/W
R θ JC(top)Junction-to-case (top) thermal resistance99.998.6°C/W
R θ JBJunction-to-board thermal resistance66.9154.9°C/W
ψ JTJunction-to-top characterization parameter4.940°C/W
ψ JBJunction-to-board characterization parameter65.2154.9°C/W

DRV5023FA Typical Application

The DRV5023 device is used in magnetic-field sensing applications.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
DRV5023Texas Instruments—
DRV5023-Q1Texas Instruments—
DRV5023AJTexas Instruments—
DRV5023BITexas Instruments—
DRV5023BIQDBZRTexas InstrumentsTO-236-3, SC-59, SOT-23-3

Other Sensors

  • ICM-20948 – TDK InvenSense, 9-axis MotionTracking device
  • MPU-6050 – TDK InvenSense, 6-Axis MEMS IMU
  • MAX30102 – Analog Devices, Pulse Oximetry and Heart-Rate Monitor Module
  • MPU-9250 – TDK InvenSense, 9-Axis MotionTracking IMU
  • ZMPT101B – Zmpt, Voltage Sensor Module
  • AD5941 – Analog Devices, High Precision, Impedance, and Electrochemical Front End
  • AH3722 – Diodes Incorporated, Hall-effect latch IC
  • AH3722-P-A – Diodes Incorporated, Hall-effect latch IC

All Sensors datasheetsAll Texas Instruments datasheets (2,418)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the DRV5023FA

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the DRV5023FA run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.