AH372XA
Hall-effect Latch ICThe AH372XA is a hall-effect latch ic from Diodes Incorporated. View the full AH372XA datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
Manufacturer
Diodes Incorporated
Category
Hall-effect Latch IC
Key Specifications
| Parameter | Value |
|---|---|
| Current - Output (Max) | 55mA |
| Supply Current (Max) | 5mA |
| Features | Temperature Compensated |
| Function | Latch, Bipolar Switch |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Output Type | Push-Pull |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Polarization | North Pole, South Pole |
| Sensing Range | 6mT Trip, -6mT Release |
| Supplier Device Package | SOT-23 (Type S) |
| Diode Technology | Hall Effect |
| Test Condition | -40°C ~ 125°C |
| Supply Voltage | 3V ~ 28V |
Overview
Part: AH3722A/AH3724A — Diodes Incorporated
Type: High-Voltage, High-Sensitivity Hall-Effect Latch IC
Description: A high-voltage, high-sensitivity Hall-effect latch IC with internal pullup resistor, designed for commutation of brushless DC motors, flow meters, linear encoders, and position sensors, operating from 3.0V to 28V.
Operating Conditions:
- Supply voltage: 3.0 to 28 V
- Operating temperature: -40 to +125 °C
Absolute Maximum Ratings:
- Max supply voltage: 32 V
- Max continuous current: 60 mA
- Max junction/storage temperature: +150 °C (Junction), -65 to +165 °C (Storage)
Key Specs:
- Output On Voltage: 0.2 V (Typ) at I OUT = 20mA, B > B OP
- Supply Current: 3 mA (Typ) at Output open, T A = +25 °C
- Internal Pullup Resistance: 14 kΩ (Typ)
- Device Startup Time: 10 μs (Typ)
- Output Current Limit: 30 mA (Min) to 55 mA (Max)
- AH3724A Operation Point (B OP): 40 Gauss (Typ)
- AH3724A Release Point (B RP): -40 Gauss (Typ)
- ESD HBM: 8 kV
Features:
- Bipolar Latch (South Pole: On, North Pole: Off)
- 3.0V to 28V Operating Voltage Range
- High Sensitivity: BOP and BRP of 25G to 40G and -25G to -40G Typical
- Internally Pullup Resistor on the Output Pin
- Resistant to Physical Stress
- Output Overcurrent Limit
- Chopper Stabilized Design Provides Superior Temperature Stability
- Minimal Switch Point Drift
- Enhanced Immunity to Stress
- Good RF Noise Immunity
- Reverse Blocking Diode and Zener Clamp on Supply
- -40 °C to +125°C Operating Temperature
- High ESD HBM: 8kV
- Industry Standard SC59, SOT23 (Type S), SIP-3 (Ammo Pack) and SIP-3 (Bulk Pack) Packages
- Totally Lead-Free & Fully RoHS Compliant
- Halogen and Antimony Free. 'Green' Device
Applications:
- Brushless DC motor commutation
- Revolution per minute (RPM) measurement
- Flow meters
- Angular and linear encoders and position sensors
- Contactless commutation, speed measurement and angular position sensing/indexing in consumer home appliances, office equipment and industrial applications
Package:
- SC59
- SOT23 (Type S)
- SIP-3 (Ammo Pack)
- SIP-3 (Bulk Pack)
Features
- Bipolar Latch (South Pole: On, North Pole: Off)
- 3.0V to 28V Operating Voltage Range
- High Sensitivity: BOP and BRP of 25G to 40G and -25G to -40G Typical
- Internally Pullup Resistor on the Output Pin
- Resistant to Physical Stress
- Output Overcurrent Limit
- Chopper Stabilized Design Provides
- Superior Temperature Stability
- Minimal Switch Point Drift
- Enhanced Immunity to Stress
- Good RF Noise Immunity
- Reverse Blocking Diode and Zener Clamp on Supply
- -40 C to +125°C Operating Temperature
- High ESD HBM: 8kV
- Industry Standard SC59, SOT23 (Type S), SIP-3 (Ammo Pack) and SIP-3 (Bulk Pack) Packages
- Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
- Halogen and Antimony Free. 'Green' Device (Note 3)
- For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/104/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative.
https://www.diodes.com/quality/product-definitions/
Notes:
- No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
- See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free.
- Halogen- and Antimony-free "Green' products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
Applications
- Brushless DC motor commutation
- Revolution per minute (RPM) measurement
- Flow meters
- Angular and linear encoders and position sensors
- Contactless commutation, speed measurement and angular position sensing/indexing in consumer home appliances, office equipment and industrial applications
Pin Configuration
SC59 and SOT23 (Type S)
(Top View)
SIP-3 (Ammo Pack) and SIP-3 (Bulk Pack)
Electrical Characteristics
| Symbol | Parameter | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| V OUT_ON | Output On Voltage | I OUT = 20mA, B > B OP | - | 0.2 | 0.4 | V |
| I OUT_OFF | Output Leakage Current | V OUT = 28V, B < B RP , output off | - | < 0.1 | 10 | μA |
| I DD | Supply Current | Output open, T A = +25 C | - | 3 | 4 | mA |
| I DD | Supply Current | Output open, T A = -40°C to +125°C | - | - | 5 | mA |
| R PU | Internal Pullup Resistance | T A = -40°C to 125°C | 10 | 14 | 18 | kΩ |
| t ST | Device Startup Time | V DD ≥ 3V, B > B OP or B < B RP (Note 6) | - | 10 | - | μs |
| f C | Chopping Frequency | V DD ≥ 3V (Note 8) | - | 500 | - | kHz |
| t D | The Time Delay from Magnetic Threshold Reached to the Start of the Output Rise or Fall | (Note 8) | - | 4 | - | μs |
| t R | Output Rising Time (External Pullup Resistor R L and Load Capacitance Dependent) | R L = 1kΩ, C L = 20pF (Note 8) | - | 0.2 | 1 | μs |
| t F | Output Falling Time (Internal Switch Resistance and Load Capacitance Dependent) | R L = 1kΩ, C L = 20pF (Note 8) | - | 0.1 | 1 | μs |
| I OCL | Output Current Limit | B > B OP (Note 9) | 30 | - | 55 | mA |
| V Z | Zener Clamp Voltage | I DD = 5mA, T A = +25°C | 28 | - | - | V |
Absolute Maximum Ratings
| Symbol | Characteristic | Characteristic | Value | Unit |
|---|---|---|---|---|
| V DD | Supply Voltage (Note 5) | Supply Voltage (Note 5) | 32 | V |
| V OUT_MAX | Output Pin Off Voltage (Note 5) | Output Pin Off Voltage (Note 5) | 32 | V |
| I OUT | Continuous Output Current | Continuous Output Current | 60 | mA |
| I OUT_R | Reverse Output Current | Reverse Output Current | -50 | mA |
| B | Magnetic Flux Density | Magnetic Flux Density | Unlimited | Unlimited |
| P D | Package Power Dissipation | SIP-3 (Ammo Pack) SIP-3 (Bulk Pack) | 550 | mW |
| P D | Package Power Dissipation | SOT23 (Type S) | 230 | mW |
| T S | Storage Temperature Range | Storage Temperature Range | -65 to +165 | °C |
| T J | Maximum Junction Temperature | Maximum Junction Temperature | +150 | °C |
| ESD HBM | Electrostatic Discharge Withstand Capability-Human Body Model | Electrostatic Discharge Withstand Capability-Human Body Model | 8 | kV |
Recommended Operating Conditions
| Symbol | Parameter | Conditions | Rating | Unit |
|---|---|---|---|---|
| V DD | Supply Voltage | Supply voltage, between V DD and GND pins | 3.0 to 28 | V |
| T A | Operating Temperature Range | Operating ambient temperature range | -40 to +125 | °C |
Package Information
Please see http://www.diodes.com/package-outlines.html for the latest version.
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| AH3722A | Diodes Incorporated | — |
| AH3724A | Diodes Incorporated | — |
| AH3724A-P-B | Diodes Incorporated | — |
| AH3724A-SA-7 | Diodes Incorporated | TO-236-3, SC-59, SOT-23-3 |
| AH3724A-W-7 | Diodes Incorporated | TO-236-3, SC-59, SOT-23-3 |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free