Tag-Connect Datasheets

4 Tag-Connect datasheets read into specs, pinouts and ratings.

Tag-Connect datasheets

4 parts · page 1 of 1. Most used first, then by part number.

TC2030-CLIP

Tag-Connect

TC2030-CLIP is a retaining clip board that attaches to the three alignment pins from underneath the PCB to temporarily hold the TC2030 Plug-of-Nails (TM) cable in place on its footprint.

Retaining Clip for Plug-of-Nails Cable

TC2030-IDC-10-NL

Tag-Connect

Tag-Connect 10-inch (254 mm) no-legs Plug-of-Nails cable with a 6-pin contact-pad footprint and a 10-pin IDC connector for programming/debug without a PCB header

Plug-of-Nails Programming CableIDC-10

TC2030-IDC-NL

Tag-Connect

Plug-of-nails 6-PIN W/o Legs 8"

Connector Cable

TC2030-IDC-NL-FP

Tag-Connect

Tag-Connect TC2030-IDC-NL 6-pin no-legs Plug-of-Nails programming/debug cable with spring-pin contacts and IDC connector; this document is its PCB footprint drawing

Plug-of-Nails Programming Cable