TC2030-IDC-NL-FP

Plug-of-Nails Programming Cable

The TC2030-IDC-NL-FP is a plug-of-nails programming cable from Tag-Connect. View the full TC2030-IDC-NL-FP datasheet below including key specifications.

TC2030-IDC-NL-FP shares its datasheet with TC2030-IDC-NL, whose page lists every part number it covers.

Official TC2030-IDC-NL-FP datasheet (PDF) — the source this page was extracted from.

Manufacturer

Tag-Connect

TC2030-IDC-NL-FP Key Specifications

Parameter	Value
Cable Length	6 in (152.4 mm)
Overall Length	1.235 in (31.369 mm)
Board Interface	6-pin footprint with three alignment pins (TC2030-CLIP compatible)
Footprint Keep-Out	No tracks or other signals within 0.020 in of any contact pad
Number Of Contacts	6 (TC2030 6-pin variant; 10-pin variant also listed as TC2030-IDC-10-NL)
Cable-End Connector	IDC (6-pin; IDC 10-pin variant listed)
Contact Pin Compressed Height	0.125 in (3.175 mm)
Contact Pad Through-Hole (If Used)	Finished hole size of 0.008 in or less

TC2030-IDC-NL-FP Overview

Part: TC2030-IDC-NL — Tag-Connect

Type: Plug-of-Nails Connector Cable

Description: 6-pin no-legs programming and test cable connecting to a PCB footprint without requiring a mating connector component.

Operating Conditions:

Supply voltage: not applicable

Key Specs:

Pin count: 6 pins (connects to 10-pin IDC)
Cable length options: 6 inches (152.4 mm) or 10 inches (254 mm)
Pin clearance: No track or signal within 0.020" of any contact pad
Max finished via size if pads are thru-hole: 0.008" or less
Contact pin compressed height: 0.125" (3.175 mm)
Connector body width: 0.236" (6.000 mm)
Connector body height: 0.39" (9.906 mm)

Features:

"No Legs" (NL) zero-footprint PCB connection
Three alignment pin holes for PCB orientation
Compatible with TC2030-CLIP board for temporary retention from underside of PCB
Eliminates physical mating connector cost and board space

Applications:

In-circuit programming and debugging
Production test and firmware flashing

Package:

6-pin footprint (footprint drawing TC2030-IDC-NL-FP)

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part Number	Manufacturer	Package
TC2030-CLIP	Tag-Connect	—
TC2030-IDC-10-NL	Tag-Connect	IDC-10
TC2030-IDC-NL	Tag-Connect	—

More datasheets

All Tag-Connect datasheets (4)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the TC2030-IDC-NL-FP

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the TC2030-IDC-NL-FP run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.