Analog Devices Datasheets

MAX4080FAUA+T

Analog Devices

Unidirectional high-side current-sense amplifier with 4.5V to 76V common-mode range, fixed gain of 5V/V (F suffix), 75μA supply current, automotive temperature rated

MAX4729

Analog Devices

MAX4729 Series SPDT 5.5 V 5.5 Ohm Surface Mount Analog Switch - SOT-363

MAX4729ELT

Analog Devices

Low-voltage 3.5 Ω single-pole/double-throw CMOS analog switch operating from a single +1.8V to +5.5V supply with 1nA typical supply current

MAX481

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for data rates up to 2.5Mbps, low-current shutdown mode, and a fail-safe receiver input.

MAX483

Analog Devices

Low-power, slew-rate-limited half-duplex RS-485/RS-422 transceiver with one driver and one receiver, supporting up to 250kbps, low-current shutdown mode, and thermal shutdown protection.

MAX485

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, 2.5Mbps data rate, 5V supply, thermal shutdown and fail-safe receiver

MAX485C/D

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply, with fail-safe open-circuit receiver input and thermal shutdown protection.

MAX485CSA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply, with fail-safe receiver input and thermal shutdown

MAX485CUA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply, with thermal shutdown and fail-safe receiver

MAX485D

Analog Devices

MAX485DR

Analog Devices

MAX485EPA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, non-slew-rate-limited for data rates up to 2.5Mbps, operating from a single 5V supply with fail-safe receiver.

MAX485ESA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply

MAX485ESA+T

Analog Devices

Low-power, half-duplex RS-485/RS-422 transceiver with un-slew-rate-limited drivers for data transmission up to 2.5Mbps.

MAX485MJA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with unlimited slew-rate driver (up to 2.5Mbps), one driver and one receiver, single 5V supply, in military temperature range version.

MAX485P

Analog Devices

MAX487

Analog Devices

Low-power, slew-rate-limited half-duplex RS-485/RS-422 transceiver with quarter-unit-load receiver (up to 128 nodes on bus), shutdown mode, and data rates up to 250kbps

MAX488

Analog Devices

Low-power, slew-rate-limited full-duplex RS-485/RS-422 transceiver with one driver and one receiver, supporting data rates up to 250kbps from a single 5V supply.

MAX489

Analog Devices

Full-duplex, slew-rate-limited low-power RS-485/RS-422 transceiver with one driver and one receiver, driver/receiver enable pins and fail-safe receiver input, supporting data rates up to 250kbps

MAX48X/MAX1487

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver (one driver, one receiver) with quarter-unit-load receiver allowing up to 128 devices on the bus and up to 2.5Mbps data rate.

MAX490

Analog Devices

Low-power, full-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for data rates up to 2.5Mbps, operating from a single 5V supply.

MAX491

Analog Devices

Low-power full-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate up to 2.5Mbps, with driver/receiver enable pins and low-power shutdown, operating from a single 5V supply.

MAX5394

Analog Devices

Single 256-tap volatile linear-taper digital potentiometer with SPI interface, internal charge pump, shutdown modes, and 10k/50k/100k end-to-end resistance options.

MAX5394L

Analog Devices

Single 256-tap volatile linear taper digital potentiometer with 10kΩ end-to-end resistance, SPI interface, and 1.7V to 5.5V supply with internal charge pump

MAX5394LATA

Analog Devices

Single 256-tap volatile linear-taper digital potentiometer with 10kΩ end-to-end resistance, SPI interface, internal charge pump, and 1.7V to 5.5V single-supply operation

MAX5394LATA+T

Analog Devices

Single, 256-tap volatile, low-voltage linear taper digital potentiometer with 10kΩ, 50kΩ, and 100kΩ end-to-end resistance options, featuring a SPI serial interface and ultra-low quiescent supply current

MAX5394M

Analog Devices

Single 256-tap volatile linear-taper digital potentiometer with SPI interface, 50kΩ end-to-end resistance, 1.7V to 5.5V single supply and internal charge pump allowing terminals up to 5.25V independent of VDD

MAX5394MATA

Analog Devices

Single 256-tap volatile linear taper digital potentiometer with 50kΩ end-to-end resistance, SPI interface, internal charge pump, and 1.7V to 5.5V supply operation

MAX5394N

Analog Devices

Single 256-tap volatile SPI linear taper digital potentiometer, 100kΩ end-to-end resistance, 1.7V to 5.5V supply with internal charge pump

MAX5394NATA

Analog Devices

Single 256-tap volatile linear taper digital potentiometer, 100kΩ end-to-end resistance (N variant), SPI interface, 1.7V to 5.5V supply with internal charge pump allowing 0-5.25V terminal voltages