Inductors Datasheets
186 Inductors datasheets read into specs, pinouts and ratings. Parts from Cjiang Technology, Sumida and YJYCOIN.
Subcategories
- Fixed Inductors (78)
- Common Mode Chokes (13)
Manufacturers
- Cjiang Technology (48)
- Sumida (29)
- YJYCOIN (22)
- Coilcraft (21)
- KOHERelec (15)
- SXN (12)
- Murata (8)
- Pulse Electronics (5)
Inductors datasheets
186 parts · page 1 of 7. Most used first, then by part number.
FTC252012S1R0MBCA
Cjiang Technology
¡À20% 35m¦¸ 5.6A 4A 1¦ÌH SMD, 2X2.5MM SMD mount
252012CDMCD/DS
Sumida
Magnetically shielded metal compound molded SMD power inductor, 2.7x2.2x1.2mm max, 0.47-2.2 µH range suitable for large current DC/DC converter applications
252012CDMCDDS-1R0MC
Sumida
1.0 uH ±20% magnetically shielded metal compound molded SMD power inductor with low audible noise, rated 4.6 A max saturation current, for DC/DC converters.
252012CDMCDDS-1R5MC
Sumida
Metal compound molding type, magnetically shielded power inductor with low audible core noise, suitable for large current applications.
252012CDMCDDS-2R2MC
Sumida
Magnetically shielded metal compound molded SMD power inductor, 2.2 µH ±20%, 2.7x2.2x1.2mm max, for DC/DC converters and large-current applications
252012CDMCDDS-R47MC
Sumida
0.47 µH ±20% magnetically shielded metal compound molded SMD power inductor with low audible noise, suited for large current DC/DC converter applications
252012CDMCDDS-R68MC
Sumida
Magnetically shielded metal compound molded SMD power inductor, 0.68 µH ±20%, suitable for large current DC/DC converter applications, 2.7×2.2×1.2mm max.
APH0420T4R7M
APV
2.29A 4.7uH Integrated molded inductor ±20% 2.49A SMD, 4.4x4.2mm Power Inductors ROHS
BLM21PG221SN1D
Murata
BLM21PG series chip ferrite bead, 220 ohm typical impedance at 100MHz, high rated current (2000mA at 85°C), low DC resistance, 0805 (2.0x1.25mm) size, 4000 pcs/180mm paper tape reel
CKCS4030
Magnetic-resin shielded SMD power inductor with ferrite core and closed magnetic circuit, 1μH to 330μH range, low buzz noise
CKCS4030-221M
Magnetic-resin shielded power inductor with low buzz noise, high shock resistance, and low leakage flux.
CM3440Z171B-10
Laird
Ferrite EMI Common Mode Chokes 170ohms 100MHz 20A 1 Choke, Thru-hole
CMLW252012S150MST
Cybermaxtech
15 µH ±20% magnetic-resin shielded wire wound SMD power inductor in 2.5x2.0x1.2mm size, 0.76A min saturation current
FXL0412-1R0
Cjiang Technology
1.0 µH ±20% molded wire-wound SMD power inductor with alloy powder core, low core loss and ultra-low buzz noise, rated 4.4 A saturation and 3.8 A heating current.
FXL0412-1R5
Cjiang Technology
1.5 µH wire wound molded SMD power inductor (±20%) with alloy powder core, low buzz noise, for DC/DC converters and other power applications
FXL0412-2R2
Cjiang Technology
2.2 µH ±20% molded wire-wound SMD power inductor with alloy powder core, low buzz noise, 125 °C max operation, for DC/DC converters and compact power applications
FXL0412-3R3
Cjiang Technology
3.3 µH ±20% wire wound molded SMD power inductor with alloy powder core, low buzz noise and 125 °C max operating temperature
FXL0412-4R7
Cjiang Technology
4.7 μH ±20% molded wire-wound SMD power inductor with alloy powder core, 195 mΩ max DCR, 1.80 A max saturation current and 1.45 A max heating current.
FXL0412-R15
Cjiang Technology
0.15 µH ±20% wire wound molded SMD power inductor with 9 mΩ max DCR, 12 A min saturation current and 6.8 A min heating rating current, rated to 125 °C total temperature.
FXL0412-R22
Cjiang Technology
0.22 µH ±20% wire wound molded SMD power inductor in the FXL0412 size, with 11 mΩ max DCR and 8.8 A max saturation current
FXL0412-R33
Cjiang Technology
0.33 µH molded wire-wound SMD power inductor (±20%) in the FXL0412 series, with alloy powder core, low buzz noise, and 125 °C max operating temperature
FXL0412-R47
Cjiang Technology
0.47 µH ±20% wire wound molded SMD power inductor with 21 mΩ max DCR, 5.4 A max saturation current and 5.2 A max heating rating current, in the 4.4x4.2x1.0 mm FXL0412 size
FXL0412-R68
Cjiang Technology
Wire wound molded SMD power inductor, 0.68 µH ±20%, 36 mΩ max DCR, with low core loss and ultra-low buzz noise in a 4.4x4.2x1.0mm body, intended for DC/DC converters.
FXL0420
Cjiang Technology
FXL0420 series wire wound molded SMD power inductor, 4.4x4.2x1.8mm, available from 0.1 to 22 uH (+/-20%) with saturation current up to 22A typ and low DCR
FXL0420-100-M
Cjiang Technology
10 µH ±20% molded wire-wound SMD power inductor with alloy powder core, low buzz noise, rated 1.6 A Isat (max) and 1.3 A Irms (max), 125 °C maximum operation.
FXL0420-1R0-M
Cjiang Technology
1.0 μH ±20% wire wound molded SMD power inductor with alloy powder core, 5.6A max saturation current, 27 mΩ max DCR, in a 4.4 x 4.2 x 1.8 mm body
FXL0420-1R2-M
Cjiang Technology
1.2 μH ±20% wire wound molded SMD power inductor with low DCR and high saturation current, in the FXL0420 series (4.4 x 4.2 x 1.8 mm).
FXL0420-1R5-M
Cjiang Technology
1.5 μH ±20% molded wire-wound SMD power inductor with alloy powder core, low core loss and ultra-low buzz noise, 125 °C max operation
FXL0420-220-M
Cjiang Technology
22 µH ±20% molded wire-wound SMD power inductor in the FXL0420 size (4.4x4.2x1.8mm nominal body), with low core loss and low buzz noise
FXL0420-2R2-M
Cjiang Technology
Halogen Free, RoHS compliant wire wound molded SMD power inductor with high rated current, low core loss, and ultra low buzz noise.