WE-SL2
SMT Common Mode Line FilterThe WE-SL2 is a smt common mode line filter from Wurth Elektronik. View the full WE-SL2 datasheet below including key specifications.
Official WE-SL2 datasheet (PDF) — the source this page was extracted from.
Manufacturer
Wurth ElektronikCategory
InductorsWE-SL2 Key Specifications
| Parameter | Value |
|---|---|
| Number of windings | 2 |
| Inductance (L) | 500 μH (at 100 kHz/ 5 mV, ±50%) |
| Maximum Impedance (Z max) | 3300 Ω (typ.) |
| Rated Current (I R) | 1000 mA (ΔT = 40 K, max.) |
| DC Resistance (R DC) | 0.15 Ω (at 20 °C, max.) |
| Leakage Inductance (L S) | 75 nH (at 1 MHz/ 1 mA, typ.) |
| Insulation Test Voltage (V T) | 500 V (AC) (at 50 Hz/ 3 mA/ 3 sec., max.) |
| Rated Voltage (V R) | 80 V |
WE-SL2 Overview
Part: WE-SL2 SMT Common Mode Line Filter — Würth Elektronik eiSos GmbH & Co. KG (Order Code: 744223)
Type: Common Mode Line Filter
Description: An SMT common mode line filter with 500 μH inductance, a maximum rated current of 1000 mA, and a rated voltage of 80 V, designed for general electronic equipment.
Operating Conditions:
- Supply voltage: 80 V
- Operating temperature: -40 up to +125 °C
- Ambient temperature (referring to I R): -40 up to +85 °C
Absolute Maximum Ratings:
- Max supply voltage: 500 V (AC) (Insulation Test Voltage)
- Max continuous current: 1000 mA
- Max operating temperature: +125 °C
Key Specs:
- Number of windings: 2
- Inductance (L): 500 μH (at 100 kHz/ 5 mV, ±50%)
- Maximum Impedance (Z max): 3300 Ω (typ.)
- Rated Current (I R): 1000 mA (ΔT = 40 K, max.)
- DC Resistance (R DC): 0.15 Ω (at 20 °C, max.)
- Leakage Inductance (L S): 75 nH (at 1 MHz/ 1 mA, typ.)
- Insulation Test Voltage (V T): 500 V (AC) (at 50 Hz/ 3 mA/ 3 sec., max.)
- Rated Voltage (V R): 80 V
Features:
- RoHS Compliant [2011/65/EU&2015/863]
- REACh Conform or declared [(EC)1907/2006]
- Halogen Free [JEDEC JS709B, IEC 61249-2-21]
- AEC-Q200 Grade 1 Component Qualification
- Moisture Sensitivity Level (MSL): 1
Applications:
- General electronic equipment
Package:
- SMT
WE-SL2 Applications
It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com.
WE-SL2 Package Information
Scale - 3:1
Other Inductors
- FXL0412-1R0 – Cjiang Technology, Wire Wound Molded SMD Power Inductors
- FXL0412-1R5 – Cjiang Technology, Wire Wound Molded SMD Power Inductors
- FXL0412-2R2 – Cjiang Technology, Wire Wound Molded SMD Power Inductors
- FXL0412-3R3 – Cjiang Technology, Wire Wound Molded SMD Power Inductors
- FXL0412-4R7 – Cjiang Technology, Wire Wound Molded SMD Power Inductors
- FXL0412-R15 – Cjiang Technology, Wire Wound Molded SMD Power Inductors
- FXL0412-R22 – Cjiang Technology, Wire Wound Molded SMD Power Inductors
- FXL0412-R33 – Cjiang Technology, Wire Wound Molded SMD Power Inductors
Ask your AI agent about the WE-SL2
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the WE-SL2 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.