VN750PTTR

Part: VN750PTTR-E (VN750-E family) — STMicroelectronics

Type: Automotive High-Side Driver (single channel, VIPower M0-3)

Description: Single-channel high-side driver with 60 mΩ max on-state resistance (Tj = 25 °C), 6 A rated output current, 5.5–36 V operating supply, on-/off-state open-load detection and thermal/short-circuit protection, in PPAK tape-and-reel.

Operating Conditions:

• Supply voltage: 5.5–36 V (Table 5; typical 13 V)
• Operating temperature: -40 to 150 °C (case operating temperature, Tc; Tj internally limited)
• Electrical characteristics specified for 8 V < VCC < 36 V, -40 °C < Tj < 150 °C
• Undervoltage shutdown 3–5.5 V; overvoltage shutdown min 36 V

Absolute Maximum Ratings:

• Max DC supply voltage (VCC): 41 V
• Reverse DC supply voltage: -0.3 V
• DC output current: internally limited; reverse DC output current: -6 A
• DC input current: ±10 mA; DC status current: ±10 mA
• DC reverse ground pin current: -200 mA
• ESD (HBM): 4000 V (PPAK, input/status/output pins)
• Maximum switching energy: 138 mJ (PPAK; L = 2.46 mH, Vbat = 13.5 V, Tjstart = 150 °C, IL = 9 A)
• Power dissipation (TC = 25 °C): 60 W
• Storage temperature: -55 to 150 °C
• Junction temperature: internally limited

Key Specs:

• On-state resistance RON: 60 mΩ max (IOUT = 2 A, Tj = 25 °C, VCC > 8 V); 120 mΩ max (IOUT = 2 A, VCC > 8 V, over temperature)
• Supply current: off-state 10 μA typ / 25 μA max (VCC = 13 V, VIN = VOUT = 0 V); on-state 2 mA typ / 3.5 mA max
• Current limitation Ilim: 6 A min, 9 A typ, 15 A max (9 V < VCC < 36 V)
• Input thresholds: VIL max 1.25 V, VIH min 3.25 V, hysteresis min 0.5 V
• Turn-on / turn-off delay: 40 μs / 30 μs typ (RL = 6.5 Ω, VCC = 13 V)
• Open-load on-state threshold: 50–200 mA (VIN = 5 V); off-state threshold 1.5–3.5 V (VIN = 0 V)
• Thermal shutdown: 150 °C min, 175 °C typ, 200 °C max; reset 135 °C min
• Thermal resistance junction-case: 2.1 °C/W; junction-ambient (PPAK): 77.1 °C/W (1) / 44 °C/W (2)

Features:

• ECOPACK, lead-free and RoHS compliant
• Automotive grade (AEC guidelines compliance)
• CMOS-compatible input
• On-state and off-state open-load detection
• Shorted load protection
• Undervoltage and overvoltage shutdown
• Protection against loss of ground
• Very low standby current
• Reverse battery protection
• Active VCC clamp, active current limitation, thermal shutdown with automatic restart

Applications:

• Automotive high-side driving of loads with one side grounded

Package:

• PPAK (VN750PTTR-E, tape and reel)
• Family also available in PENTAWATT, P²PAK and PENTAWATT in-line

• ■ ECOPACK ® : lead free and RoHS compliant
• ■ Automotive Grade: compliance with AEC guidelines
• ■ CMOS compatible input
• ■ On-state open-load detection
• ■ Off-state open-load detection
• ■ Shorted load protection
• ■ Undervoltage and overvoltage shutdown
• ■ Protection against loss of ground
• ■ Very low standby current
• ■ Reverse battery protection

Table 1. Device summary

Figure 1. Block diagram

Figure 2. Configuration diagram (top view)

Table 2. Suggested connections for unused and not connected pins

Table 2. Suggested connections for unused and not connected pins

Figure 3. Current and voltage conventions

Stress values that exceed those listed in the 'Absolute maximum ratings' table can cause permanent damage to the device. These are stress ratings only, and operation of the device at these, or any other conditions greater than those, indicated in the operating sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics sure program and other relevant quality documents.

Table 3. Absolute maximum ratings

Table 3. Absolute maximum ratings

Table 3. Absolute maximum ratings (continued)

Table 4. Thermal data

Figure 35. PENTAWATT package dimensions

Table 12. PENTAWATT mechanical data

Table 12. PENTAWATT mechanical data

Table 12. PENTAWATT mechanical data (continued)

Table 12. PENTAWATT mechanical data (continued)