TX2-5V
The TX2-5V is an electronic component from Panasonic. View the full TX2-5V datasheet below including key specifications.
Official TX2-5V datasheet (PDF) — the source this page was extracted from.
Manufacturer
PanasonicCategory
RelaysPackage
DIP,15x7.4mm
Lifecycle
Production (Last Updated: 1 month ago)
TX2-5V Key Specifications
| Parameter | Value |
|---|---|
| Ambient Temperature Range High | 85 °C |
| Approval Agency | BSI, cURus |
| Approvals | CSA, UL |
| Case/Package | DIP |
| Coil Current | 28.1 mA |
| Coil Current | 28 mA |
| Coil Power | 140 mW |
| Coil Resistance | 178 Ω |
| Coil Type | Non Latching |
| Coil Type | Non-Latching |
| Coil Voltage | 5VDC |
| Coil Voltage (DC) | 3.75 V |
| Contact Current Rating | 2 A |
| Contact Form | DPDT (2 Form C) |
| Contact Material | Silver (Ag), Gold (Au) |
| Contact Material | Silver |
| Contact Plating | Gold |
| Contact Rating (Current) | 2 A |
| Contact Resistance | 100 mΩ |
| Current Rating | 2 A |
| Depth | 7.4 mm |
| Electrical Life | 100 kcycles |
| Height | 8.2 mm |
| Hole Diameter | 1 mm |
| Insertion Loss (dB) | 0.8 dB |
| Insulation Resistance | 1 GΩ |
| Introduction Date | 2005-10-25 |
| Lead Free | Lead Free |
| Lead Pitch | 2.54 mm |
| Length | 15 mm |
| Lifecycle Status | Production (Last Updated: 1 month ago) |
| Load - Max Switching | 60W |
| Manufacturer Lifecycle Status | ACTIVE (Last Updated: 1 month ago) |
| Max Current Rating | 2 A |
| Max Operating Temperature | 85 °C |
| Max Voltage Rating (DC) | 220 V |
| Min Operating Temperature | -40 °C |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole |
| Must Operate Voltage | 3.75 VDC |
| Must Release Voltage | 0.5 VDC |
| Number of Contacts | 2 |
| Number of Pins | 8 |
| Number of Poles | 2 |
| Number of Terminals | 8 |
| Operate Time | 4 ms |
| Operate Time | 4 ms |
| Operating Temperature | -40°C ~ 85°C |
| Packaging | Bulk |
| Pitch | 2.54 mm |
| Power Consumption | 140 mW |
| Power Rating | 60 W |
| Radiation Hardening | No |
| Ratings | CSA |
| REACH SVHC | Unaffected |
| Relay Type | Telecom |
| Relay Type | Telecom |
| Release Time | 4 ms |
| Release Time | 4 ms |
| Response Time | 4 ms |
| RoHS | Compliant |
| Seal Rating | Sealed - Fully |
| Sealable | WATER PROOF |
| Switching Current | 2 A |
| Switching Voltage | 220VDC - Max |
| Termination | Solder |
| Termination Style | PC Pin |
| Test Voltage | 2 kV |
| Throw Configuration | DPDT |
| Voltage Rating (DC) | 30 V |
| Weight | 2 g |
| Width | 7.4 mm |
TX2-5V Overview
Part: TX-TH Series (TX2-5V-TH)
Type: Electromechanical Signal / Power Relay
Description: 2 Form C low-profile signal relay with 2 A 30 V DC nominal switching capacity and capability to handle up to 7.5 A controlled inrush current.
Operating Conditions:
- Supply voltage: 5 V DC nominal coil voltage (1.5 V to 48 V DC options across family)
- Operating temperature: -40 °C to +85 °C (up to 24 V coil), -40 °C to +70 °C (48 V coil)
- Operating humidity: 5% to 85% RH (non-condensing, non-freezing)
Key Specs:
- Contact arrangement: 2 Form C (DPDT)
- Contact rating: 2 A at 30 V DC, 0.5 A at 125 V AC (resistive load)
- Maximum switching voltage: 220 V DC, 250 V AC
- Maximum switching current: 7.5 A (with NO and COM pins paralleled per precaution)
- Maximum switching power: 60 W, 60 VA (resistive load)
- Initial contact resistance: Max. 100 mΩ (measured at 6 V DC, 1 A)
- Coil power consumption: 140 mW nominal (single side stable, 1.5 to 24 V DC)
- Operate / Release time: Max. 4 ms / Max. 4 ms (excluding bounce)
- Breakdown voltage: 2,000 Vrms (between contact and coil, 1 min)
- Surge breakdown voltage: 2,500 V (2 × 10 μs, between contact and coil)
Features:
- High breakdown voltage of 2,000 V between contact and coil, 1,000 V between open contacts
- High surge breakdown resistance up to 2,500 V (Bellcore)
- High operating sensitivity of 140 mW nominal operating power
- Sealed construction allows automatic washing
- Single side stable, 1-coil latching, and 2-coil latching options available
Applications:
- Air-conditioning control (solenoid load)
- High-capacity load control
Package:
- Standard PC board terminal (15.0 mm × 7.4 mm × 8.2 mm)
- Surface-mount terminal (SA low-profile and SS space-saving types)
TX2-5V Features
- Small size, controlled 7.5A inrush current possible
- 2,000 V breakdown voltage between contact and coil
The body block construction of the coil that is sealed at formation offers a high breakdown voltage of 2,000 V between contact and coil, and 1,000 V between open contacts.
TX2-5V Applications
- Air-conditioning control (solenoid load)
- Others, High-capacity control etc.
TX2-5V Typical Application
- Air-conditioning control (solenoid load)
- Others, High-capacity control etc.
More part numbers on this datasheet
Their pages show this same datasheet.
Other Relays
- TX2-4.5V – Panasonic, Signal Relay
- G6K-2F – Omron Electronics Inc-EMC Div, Surface Mounting Relay
- G6K-2F-DC5 – Omron, DPDT Low Signal Relay
- G6K-2F-TR – Omron Electronics Inc-EMC Div, Surface Mounting Relay
- G6K-2F-Y – Omron Electronics Inc-EMC Div, Surface Mounting Relay
- G6K-2F-Y-DC5 – Omron, Low Signal Relay
- G6K-2F-Y-TR – Omron, Surface Mounting Relay
- G6K-2G – Omron Electronics Inc-EMC Div, Surface Mounting Relay
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Ask your AI agent about the TX2-5V
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TX2-5V run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.