Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

TPS631000DRLR.A

Buck-Boost Converter

The TPS631000DRLR.A is a buck-boost converter from Texas Instruments. View the full TPS631000DRLR.A datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

TPS631000DRLR.A shares its datasheet with TPS631000, whose page lists every part number it covers.

Official TPS631000DRLR.A datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Buck-Boost Converter

TPS631000DRLR.A Key Specifications

ParameterValue
Output Current2A
Switching Frequency2MHz
FunctionBuck-Boost
Height0 m
Length2.1 mm
Lifecycle StatusProduction (Last Updated: 2 days ago)
Manufacturer Lifecycle StatusACTIVE (Last Updated: 2 days ago)
Mounting TypeSurface Mount
Number of Outputs1
Number of Pins8
Operating Temperature-40°C ~ 125°C
Output TypeAdjustable
Package / CaseSOT-583
PackagingMouseReel
Part SeriesTPS
RoHSCompliant
Standard Pack Qty4000
Supplier Device PackageSOT-583
Synchronous RectifierNo
Thickness550 µm
TopologyBoost, Buck
TopologyBuck-Boost
Input Voltage (Max)5.5V
Input Voltage (Min)1.6V
Output Voltage (Max)5.3V
Output Voltage1.2V
Width1.2 mm

TPS631000DRLR.A Overview

Part: TPS631000 — Texas Instruments

Type: Buck-Boost Converter

Description: 1.6–5.5 V input, 1.2–5.3 V adjustable output buck-boost converter with 3 A typical peak switch current limit, 2 MHz fixed-frequency switching and 8 μA typical quiescent current.

Operating Conditions:

  • Supply voltage: 1.6–5.5 V (input above 1.65 V needed for start-up)
  • Operating junction temperature: -40 to 125 °C
  • Output voltage: 1.2–5.3 V
  • Inductance: 0.7–1.3 μH (1 μH nominal)

Absolute Maximum Ratings:

  • Input voltage (VIN, LX1, LX2, VOUT, EN, FB, MODE): -0.3 to 6 V
  • LX1/LX2 for less than 10 ns: -2.0 to 7 V
  • Operating junction temperature: -40 to 150 °C
  • Storage temperature: -65 to 150 °C

Key Specs:

  • Switch peak current limit (sourcing): 2.6 / 3 / 3.35 A (min/typ/max), VO = 3.3 V
  • Feedback reference voltage: 495 / 500 / 505 mV
  • Switching frequency: 1.8 / 2 / 2.2 MHz
  • Shutdown current into VIN: 0.5 typ, 0.9 max μA (VI = 3.8 V, EN = 0 V, TJ = 25 °C)
  • Quiescent current into VOUT: 8 μA typ (VI = 2.2 V, VO = 3.3 V, no switching)
  • On-state resistance: Q1 45 mΩ, Q2 50 mΩ, Q3 50 mΩ, Q4 85 mΩ typ (VI = 3.8 V, VO = 3.3 V, 0.2 A)
  • UVLO rising threshold: 1.5 / 1.55 / 1.599 V
  • Soft-start ramp time: 6.42 / 7.55 / 8.68 ms
  • Output overvoltage threshold: 5.55 / 5.75 / 5.95 V
  • Thermal resistance, junction-to-ambient (DRL): 132.7 °C/W

Features:

  • Output current of 2 A for VIN ≥ 3 V and 1.5 A for VIN ≥ 2.7 V (VOUT = 3.3 V)
  • Peak current mode buck-boost architecture with seamless mode transitions and less than 20 mV output ripple
  • Power save mode (MODE pin low) or forced PWM (MODE pin high)
  • Forward and reverse current operation
  • Start-up into prebiased outputs
  • Overcurrent, short-circuit, overtemperature and overvoltage protection
  • Integrated soft start
  • True shutdown with load disconnect
  • Works with a 1 μH inductor and one 0805 output capacitor
  • 150 mV load-step response at a 1 A step

Applications:

  • System pre-regulator (smartphone, tablet, terminal, telematics)
  • Point-of-load regulation (wired sensor, port/cable adapter, dongle)
  • Fingerprint and camera sensors (electronic smart lock, IP network camera)
  • RF amplifier supply (smart sensors)
  • Voltage stabilizer (datacom, optical modules, cooling and heating)

Package:

  • DRL (SOT-5X3, 8 pins), 2.1 mm × 1.6 mm

TPS631000DRLR.A Features

  • 1.6V to 5.5V input voltage range
  • -Device input voltage > 1.65V for start-up
  • 1.2V to 5.3V output voltage range (adjustable)
  • High output current capability, 3A peak switch current
  • -2A output current for V IN ≥ 3V, V OUT = 3.3V
  • -1.5A output current for V IN ≥ 2.7V, V OUT = 3.3V
  • High efficiency over the entire load range
  • -8μA typical quiescent current
  • -Power save mode
  • 150mV load-step response at a 1A current step
  • Peak current buck-boost mode architecture
  • -Seamless mode transition with < 20mV output ripple
  • -Forward and reverse current operation
  • -Start-up into prebiased outputs
  • -Fixed-frequency operation with 2MHz switching
  • Safety and robust operation features
  • -Overcurrent protection and short-circuit protection
  • -Integrated soft start with active ramp adoption
  • -Overtemperature protection and overvoltage protection
  • -True shutdown function with load disconnect
  • -Forward and backward current limit
  • Small design size
  • -Small 1μH inductor
  • -Works with one 0805 output capacitor over the full VOUT range
  • Create a custom design using the TPS631000 with the WEBENCH ® Power Designer

TPS631000DRLR.A Applications

  • System pre-regulator (smartphone, tablet, terminal, telematics)
  • Point-of-load regulation (wired sensor, port/cable adapter, and dongle)
  • Fingerprint, camera sensors (electronic smart lock, IP network camera)
  • RF amplifier supply (smart sensors)
  • Voltage stabilizer (datacom, optical modules, cooling and heating)

TPS631000DRLR.A Pin Configuration

Figure 4-1. 8-Pin DRL SOT-5X3 Package (Top View)

Table 4-1. Pin Functions

PINPINTYPE (1)
NAMENO.TYPE (1)DESCRIPTION
VOUT1PWRPower stage output
LX22PWRInductor switching node of the boost stage
LX13PWRInductor switching node of the buck stage
VIN4PWRSupply input voltage
EN5IDevice enable. Set High to enable and Low to disable. This pin must not be left floating.
MODE6IPFM/PWM selection. Set Low for power save mode, set High for forced PWM. This pin must not be left floating.
GND7PWRPower ground
FB8IVoltage feedback. Sensing pin

TPS631000DRLR.A Electrical Characteristics

Over operating junction temperature range and recommended supply voltage range (unless otherwise noted). Typical values are at V I = 3.8 V , V O = 3.3 V and TJ = 25°C (unless otherwise noted).

PARAMETERTESTCONDITIONSMINTYPMAXUNIT
SUPPLYSUPPLYSUPPLYSUPPLYSUPPLYSUPPLYSUPPLYSUPPLYSUPPLY
I SDShutdown current into VINShutdown current into VINV I = 3.8 V, V (EN) = 0 V T J = 25°CV I = 3.8 V, V (EN) = 0 V T J = 25°C0.50.9μA
Quiescent current into VINQuiescent current into VINV I = 2.2 V, V O = 3.3 V, V (EN) = 2.2 V, no switchingV I = 2.2 V, V O = 3.3 V, V (EN) = 2.2 V, no switching0.156.1μA
I QQuiescent current into VOUTQuiescent current into VOUTV I = 2.2 V, V O = 3.3 V, V (EN) = 2.2 V, no switchingV I = 2.2 V, V O = 3.3 V, V (EN) = 2.2 V, no switching8μA
V IT+Positive-going UVLO threshold voltagePositive-going UVLO threshold voltage1.51.551.599V
V IT-Negative-going UVLO threshold voltageNegative-going UVLO threshold voltageDuring start-upDuring start-up1.41.451.499V
V hysUVLO threshold voltage hysteresisUVLO threshold voltage hysteresis99mV
V I(POR)T+Positive-going POR threshold voltagePositive-going POR threshold voltagemaximum of V I or V Omaximum of V I or V O1.251.451.65V
V I(POR)T-Negative-going POR threshold voltageNegative-going POR threshold voltage1.221.431.6V
I/O SIGNALSI/O SIGNALSI/O SIGNALSI/O SIGNALSI/O SIGNALSI/O SIGNALSI/O SIGNALSI/O SIGNALSI/O SIGNALS
V T+Positive-going threshold voltageEN, MODE0.770.981.2V
V T-Negative-going threshold voltageEN, MODE0.50.660.76V
V hysHysteresis voltageEN, MODE300mV
I IHHigh-level input current(EN, MODE)V (EN) = V (MODE) = 1.5 V, no pullup resistorV (EN) = V (MODE) = 1.5 V, no pullup resistor±0.01±0.25μA
I ILLow-level input current(EN, MODE)V (EN) = V (MODE) = 0 V,V (EN) = V (MODE) = 0 V,±0.01±0.1μA
I BaisInput bias current(EN, MODE)V (EN) = 5.5 VV (EN) = 5.5 V±0.01±0.3μA
POWER SWITCHPOWER SWITCHPOWER SWITCHPOWER SWITCHPOWER SWITCHPOWER SWITCHPOWER SWITCHPOWER SWITCHPOWER SWITCH
r DS(on)On-state resistanceQ145mΩ
Q2V I = 3.8 V, V O = 3.3 V,V I = 3.8 V, V O = 3.3 V,50mΩ
Q3
Q4
test current = 0.2 Atest current = 0.2 A50
85
mΩ
mΩ
V I = 0 V, T J = 25°CV I = 0 V, T J = 25°C0.82μA
I ReverseReverse current into VOUTReverse current into VOUTV O = 3.3 V, V (EN) = 0 V T J = -40°C to 125°CV O = 3.3 V, V (EN) = 0 V T J = -40°C to 125°C12μA
CURRENT LIMITCURRENT LIMITCURRENT LIMITCURRENT LIMITCURRENT LIMITCURRENT LIMITCURRENT LIMITCURRENT LIMITCURRENT LIMIT
I L(PEAK)Switch peak current limit (1)Outputsourcing current2.633.35A
Q1Q1V O = 3.3 V Output sinking current, V I = 3.3 VV O = 3.3 V Output sinking current, V I = 3.3 V-0.7-0.55-0.45A
I PFM_entryThe output current at PFM mode entry threshold (peak) current (1)The output current at PFM mode entry threshold (peak) current (1)I O fallingI O falling145mA
OUTPUTOUTPUTOUTPUTOUTPUTOUTPUTOUTPUTOUTPUTOUTPUTOUTPUT
CONTROL[FEEDBACK PIN]CONTROL[FEEDBACK PIN]CONTROL[FEEDBACK PIN]CONTROL[FEEDBACK PIN]CONTROL[FEEDBACK PIN]CONTROL[FEEDBACK PIN]CONTROL[FEEDBACK PIN]CONTROL[FEEDBACK PIN]CONTROL[FEEDBACK PIN]
V FBReference voltage on feedback pinReference voltage on feedback pin495500505mV
PROTECTION FEATURESPROTECTION FEATURESPROTECTION FEATURESPROTECTION FEATURESPROTECTION FEATURESPROTECTION FEATURESPROTECTION FEATURESPROTECTION FEATURESPROTECTION FEATURES
V T+(OVP)Positive-going OVP threshold voltagePositive-going OVP threshold voltage5.555.755.95V
V T+(IVP)Positive-going IVP threshold voltagePositive-going IVP threshold voltage5.555.755.95V
TIMING PARAMETERSTIMING PARAMETERSTIMING PARAMETERSTIMING PARAMETERSTIMING PARAMETERSTIMING PARAMETERSTIMING PARAMETERSTIMING PARAMETERSTIMING PARAMETERS
t d(EN)Delay between a rising edge on the EN pin and the start of the output voltage rampDelay between a rising edge on the EN pin and the start of the output voltage ramp0.871.5ms
t d(ramp)Soft-start ramp timeSoft-start ramp time6.427.558.68ms
f SWSwitching frequencySwitching frequency1.822.2MHz

TPS631000DRLR.A Absolute Maximum Ratings

over operating junction temperature range (unless otherwise noted) (1)

MINMAXUNIT
V IInput voltage (VIN, LX1, LX2, VOUT, EN, FB, MODE) (2)-0.36V
Input voltage for less than 10 ns (LX1, LX2) (2)-2.07V
T JOperating junction temperature-40150°C
T stgStorage temperature-65150°C

over operating junction temperature (unless otherwise noted)

MINNOMMAXUNIT
V ISupply voltage1.65.5V
V OOutput voltage1.25.3V
C IInput capacitanceV I = 1.6 V to 5.5 V4.2μF
C OOutput capacitance1.2 V ≤ V O ≤ 3.6 V, nominal value at V O = 3.3 V10.416.9330μF
3.6 V < V O ≤ 5.3 V, nominal value at V O = 5 V7.9510.6330μF
LInductance0.711.3μH
T JOperating junction temperature range-40125°C

TPS631000DRLR.A Thermal Information

over operating free-air temperature range (unless otherwise noted)

THERMAL METRIC (1)TPS631000 DRL - 8 PINSUNIT
R ΘJAJunction-to-ambient thermal resistance132.7°C/W
R ΘJC(top)Junction-to-case (top) thermal resistance43.8°C/W
R ΘJBJunction-to-board thermal resistance27.3°C/W
Ψ JTJunction-to-top characterization parameter1.2°C/W
Ψ JBJunction-to-board characterization parameter26.6°C/W
R ΘJC(bot)Junction-to-case (bottom) thermal resistanceN/A°C/W

TPS631000DRLR.A Typical Application

The TPS631000 is a high-efficiency, low-quiescent current, buck-boost converter. The device is designed for applications needing a regulated output voltage from an input supply that can be higher or lower than the output voltage.

TPS631000DRLR.A Package Information

PART NUMBERPACKAGE (1)PACKAGE SIZE (2)
TPS631000DRL (SOT-5X3, 8)2.1mm × 1.6mm
  • (1) For more information, see Section 10.
  • (2) The package size (length × width) is a nominal value and includes pins, where applicable.

Efficiency Target vs Output Current (VOUT = 3.3V)

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
TPS631000Texas Instruments—
TPS631000DRLRTexas InstrumentsSOT-583

More datasheets

All Texas Instruments datasheets (2,670)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the TPS631000DRLR.A

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the TPS631000DRLR.A run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.