TPS631000
Buck-Boost ConverterThe TPS631000 is a buck-boost converter from Texas Instruments. View the full TPS631000 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
Official TPS631000 datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Buck-Boost Converter
TPS631000 Key Specifications
| Parameter | Value |
|---|---|
| Output Current | 2A |
| Switching Frequency | 2MHz |
| Function | Buck-Boost |
| Height | 0 m |
| Length | 2.1 mm |
| Lifecycle Status | Production (Last Updated: 2 days ago) |
| Manufacturer Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Number of Pins | 8 |
| Operating Temperature | -40°C ~ 125°C |
| Output Type | Adjustable |
| Package / Case | SOT-583 |
| Packaging | MouseReel |
| Part Series | TPS |
| RoHS | Compliant |
| Standard Pack Qty | 4000 |
| Supplier Device Package | SOT-583 |
| Synchronous Rectifier | No |
| Thickness | 550 µm |
| Topology | Boost, Buck |
| Topology | Buck-Boost |
| Input Voltage (Max) | 5.5V |
| Input Voltage (Min) | 1.6V |
| Output Voltage (Max) | 5.3V |
| Output Voltage | 1.2V |
| Width | 1.2 mm |
TPS631000 Overview
Part: TPS631000 — Texas Instruments
Type: Buck-Boost Converter
Description: 1.6–5.5 V input, 1.2–5.3 V adjustable output buck-boost converter with 3 A typical peak switch current limit, 2 MHz fixed-frequency switching and 8 μA typical quiescent current.
Operating Conditions:
- Supply voltage: 1.6–5.5 V (input above 1.65 V needed for start-up)
- Operating junction temperature: -40 to 125 °C
- Output voltage: 1.2–5.3 V
- Inductance: 0.7–1.3 μH (1 μH nominal)
Absolute Maximum Ratings:
- Input voltage (VIN, LX1, LX2, VOUT, EN, FB, MODE): -0.3 to 6 V
- LX1/LX2 for less than 10 ns: -2.0 to 7 V
- Operating junction temperature: -40 to 150 °C
- Storage temperature: -65 to 150 °C
Key Specs:
- Switch peak current limit (sourcing): 2.6 / 3 / 3.35 A (min/typ/max), VO = 3.3 V
- Feedback reference voltage: 495 / 500 / 505 mV
- Switching frequency: 1.8 / 2 / 2.2 MHz
- Shutdown current into VIN: 0.5 typ, 0.9 max μA (VI = 3.8 V, EN = 0 V, TJ = 25 °C)
- Quiescent current into VOUT: 8 μA typ (VI = 2.2 V, VO = 3.3 V, no switching)
- On-state resistance: Q1 45 mΩ, Q2 50 mΩ, Q3 50 mΩ, Q4 85 mΩ typ (VI = 3.8 V, VO = 3.3 V, 0.2 A)
- UVLO rising threshold: 1.5 / 1.55 / 1.599 V
- Soft-start ramp time: 6.42 / 7.55 / 8.68 ms
- Output overvoltage threshold: 5.55 / 5.75 / 5.95 V
- Thermal resistance, junction-to-ambient (DRL): 132.7 °C/W
Features:
- Output current of 2 A for VIN ≥ 3 V and 1.5 A for VIN ≥ 2.7 V (VOUT = 3.3 V)
- Peak current mode buck-boost architecture with seamless mode transitions and less than 20 mV output ripple
- Power save mode (MODE pin low) or forced PWM (MODE pin high)
- Forward and reverse current operation
- Start-up into prebiased outputs
- Overcurrent, short-circuit, overtemperature and overvoltage protection
- Integrated soft start
- True shutdown with load disconnect
- Works with a 1 μH inductor and one 0805 output capacitor
- 150 mV load-step response at a 1 A step
Applications:
- System pre-regulator (smartphone, tablet, terminal, telematics)
- Point-of-load regulation (wired sensor, port/cable adapter, dongle)
- Fingerprint and camera sensors (electronic smart lock, IP network camera)
- RF amplifier supply (smart sensors)
- Voltage stabilizer (datacom, optical modules, cooling and heating)
Package:
- DRL (SOT-5X3, 8 pins), 2.1 mm × 1.6 mm
TPS631000 Features
- 1.6V to 5.5V input voltage range
- -Device input voltage > 1.65V for start-up
- 1.2V to 5.3V output voltage range (adjustable)
- High output current capability, 3A peak switch current
- -2A output current for V IN ≥ 3V, V OUT = 3.3V
- -1.5A output current for V IN ≥ 2.7V, V OUT = 3.3V
- High efficiency over the entire load range
- -8μA typical quiescent current
- -Power save mode
- 150mV load-step response at a 1A current step
- Peak current buck-boost mode architecture
- -Seamless mode transition with < 20mV output ripple
- -Forward and reverse current operation
- -Start-up into prebiased outputs
- -Fixed-frequency operation with 2MHz switching
- Safety and robust operation features
- -Overcurrent protection and short-circuit protection
- -Integrated soft start with active ramp adoption
- -Overtemperature protection and overvoltage protection
- -True shutdown function with load disconnect
- -Forward and backward current limit
- Small design size
- -Small 1μH inductor
- -Works with one 0805 output capacitor over the full VOUT range
- Create a custom design using the TPS631000 with the WEBENCH ® Power Designer
TPS631000 Applications
- System pre-regulator (smartphone, tablet, terminal, telematics)
- Point-of-load regulation (wired sensor, port/cable adapter, and dongle)
- Fingerprint, camera sensors (electronic smart lock, IP network camera)
- RF amplifier supply (smart sensors)
- Voltage stabilizer (datacom, optical modules, cooling and heating)
TPS631000 Pin Configuration
Figure 4-1. 8-Pin DRL SOT-5X3 Package (Top View)
Table 4-1. Pin Functions
| PIN | PIN | TYPE (1) | |
|---|---|---|---|
| NAME | NO. | TYPE (1) | DESCRIPTION |
| VOUT | 1 | PWR | Power stage output |
| LX2 | 2 | PWR | Inductor switching node of the boost stage |
| LX1 | 3 | PWR | Inductor switching node of the buck stage |
| VIN | 4 | PWR | Supply input voltage |
| EN | 5 | I | Device enable. Set High to enable and Low to disable. This pin must not be left floating. |
| MODE | 6 | I | PFM/PWM selection. Set Low for power save mode, set High for forced PWM. This pin must not be left floating. |
| GND | 7 | PWR | Power ground |
| FB | 8 | I | Voltage feedback. Sensing pin |
TPS631000 Electrical Characteristics
Over operating junction temperature range and recommended supply voltage range (unless otherwise noted). Typical values are at V I = 3.8 V , V O = 3.3 V and TJ = 25°C (unless otherwise noted).
| PARAMETER | TEST | CONDITIONS | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|
| SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY |
| I SD | Shutdown current into VIN | Shutdown current into VIN | V I = 3.8 V, V (EN) = 0 V T J = 25°C | V I = 3.8 V, V (EN) = 0 V T J = 25°C | 0.5 | 0.9 | μA | |
| Quiescent current into VIN | Quiescent current into VIN | V I = 2.2 V, V O = 3.3 V, V (EN) = 2.2 V, no switching | V I = 2.2 V, V O = 3.3 V, V (EN) = 2.2 V, no switching | 0.15 | 6.1 | μA | ||
| I Q | Quiescent current into VOUT | Quiescent current into VOUT | V I = 2.2 V, V O = 3.3 V, V (EN) = 2.2 V, no switching | V I = 2.2 V, V O = 3.3 V, V (EN) = 2.2 V, no switching | 8 | μA | ||
| V IT+ | Positive-going UVLO threshold voltage | Positive-going UVLO threshold voltage | 1.5 | 1.55 | 1.599 | V | ||
| V IT- | Negative-going UVLO threshold voltage | Negative-going UVLO threshold voltage | During start-up | During start-up | 1.4 | 1.45 | 1.499 | V |
| V hys | UVLO threshold voltage hysteresis | UVLO threshold voltage hysteresis | 99 | mV | ||||
| V I(POR)T+ | Positive-going POR threshold voltage | Positive-going POR threshold voltage | maximum of V I or V O | maximum of V I or V O | 1.25 | 1.45 | 1.65 | V |
| V I(POR)T- | Negative-going POR threshold voltage | Negative-going POR threshold voltage | 1.22 | 1.43 | 1.6 | V | ||
| I/O SIGNALS | I/O SIGNALS | I/O SIGNALS | I/O SIGNALS | I/O SIGNALS | I/O SIGNALS | I/O SIGNALS | I/O SIGNALS | I/O SIGNALS |
| V T+ | Positive-going threshold voltage | EN, MODE | 0.77 | 0.98 | 1.2 | V | ||
| V T- | Negative-going threshold voltage | EN, MODE | 0.5 | 0.66 | 0.76 | V | ||
| V hys | Hysteresis voltage | EN, MODE | 300 | mV | ||||
| I IH | High-level input current | (EN, MODE) | V (EN) = V (MODE) = 1.5 V, no pullup resistor | V (EN) = V (MODE) = 1.5 V, no pullup resistor | ±0.01 | ±0.25 | μA | |
| I IL | Low-level input current | (EN, MODE) | V (EN) = V (MODE) = 0 V, | V (EN) = V (MODE) = 0 V, | ±0.01 | ±0.1 | μA | |
| I Bais | Input bias current | (EN, MODE) | V (EN) = 5.5 V | V (EN) = 5.5 V | ±0.01 | ±0.3 | μA | |
| POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH |
| r DS(on) | On-state resistance | Q1 | 45 | mΩ | ||||
| Q2 | V I = 3.8 V, V O = 3.3 V, | V I = 3.8 V, V O = 3.3 V, | 50 | mΩ | ||||
| Q3 Q4 | test current = 0.2 A | test current = 0.2 A | 50 85 | mΩ mΩ | ||||
| V I = 0 V, T J = 25°C | V I = 0 V, T J = 25°C | 0.8 | 2 | μA | ||||
| I Reverse | Reverse current into VOUT | Reverse current into VOUT | V O = 3.3 V, V (EN) = 0 V T J = -40°C to 125°C | V O = 3.3 V, V (EN) = 0 V T J = -40°C to 125°C | 12 | μA | ||
| CURRENT LIMIT | CURRENT LIMIT | CURRENT LIMIT | CURRENT LIMIT | CURRENT LIMIT | CURRENT LIMIT | CURRENT LIMIT | CURRENT LIMIT | CURRENT LIMIT |
| I L(PEAK) | Switch peak current limit (1) | Output | sourcing current | 2.6 | 3 | 3.35 | A | |
| Q1 | Q1 | V O = 3.3 V Output sinking current, V I = 3.3 V | V O = 3.3 V Output sinking current, V I = 3.3 V | -0.7 | -0.55 | -0.45 | A | |
| I PFM_entry | The output current at PFM mode entry threshold (peak) current (1) | The output current at PFM mode entry threshold (peak) current (1) | I O falling | I O falling | 145 | mA | ||
| OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT |
| CONTROL[FEEDBACK PIN] | CONTROL[FEEDBACK PIN] | CONTROL[FEEDBACK PIN] | CONTROL[FEEDBACK PIN] | CONTROL[FEEDBACK PIN] | CONTROL[FEEDBACK PIN] | CONTROL[FEEDBACK PIN] | CONTROL[FEEDBACK PIN] | CONTROL[FEEDBACK PIN] |
| V FB | Reference voltage on feedback pin | Reference voltage on feedback pin | 495 | 500 | 505 | mV | ||
| PROTECTION FEATURES | PROTECTION FEATURES | PROTECTION FEATURES | PROTECTION FEATURES | PROTECTION FEATURES | PROTECTION FEATURES | PROTECTION FEATURES | PROTECTION FEATURES | PROTECTION FEATURES |
| V T+(OVP) | Positive-going OVP threshold voltage | Positive-going OVP threshold voltage | 5.55 | 5.75 | 5.95 | V | ||
| V T+(IVP) | Positive-going IVP threshold voltage | Positive-going IVP threshold voltage | 5.55 | 5.75 | 5.95 | V | ||
| TIMING PARAMETERS | TIMING PARAMETERS | TIMING PARAMETERS | TIMING PARAMETERS | TIMING PARAMETERS | TIMING PARAMETERS | TIMING PARAMETERS | TIMING PARAMETERS | TIMING PARAMETERS |
| t d(EN) | Delay between a rising edge on the EN pin and the start of the output voltage ramp | Delay between a rising edge on the EN pin and the start of the output voltage ramp | 0.87 | 1.5 | ms | |||
| t d(ramp) | Soft-start ramp time | Soft-start ramp time | 6.42 | 7.55 | 8.68 | ms | ||
| f SW | Switching frequency | Switching frequency | 1.8 | 2 | 2.2 | MHz |
TPS631000 Absolute Maximum Ratings
over operating junction temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| V I | Input voltage (VIN, LX1, LX2, VOUT, EN, FB, MODE) (2) | -0.3 | 6 | V |
| Input voltage for less than 10 ns (LX1, LX2) (2) | -2.0 | 7 | V | |
| T J | Operating junction temperature | -40 | 150 | °C |
| T stg | Storage temperature | -65 | 150 | °C |
TPS631000 Recommended Operating Conditions
over operating junction temperature (unless otherwise noted)
| MIN | NOM | MAX | UNIT | |||
|---|---|---|---|---|---|---|
| V I | Supply voltage | 1.6 | 5.5 | V | ||
| V O | Output voltage | 1.2 | 5.3 | V | ||
| C I | Input capacitance | V I = 1.6 V to 5.5 V | 4.2 | μF | ||
| C O | Output capacitance | 1.2 V ≤ V O ≤ 3.6 V, nominal value at V O = 3.3 V | 10.4 | 16.9 | 330 | μF |
| 3.6 V < V O ≤ 5.3 V, nominal value at V O = 5 V | 7.95 | 10.6 | 330 | μF | ||
| L | Inductance | 0.7 | 1 | 1.3 | μH | |
| T J | Operating junction temperature range | -40 | 125 | °C |
TPS631000 Thermal Information
over operating free-air temperature range (unless otherwise noted)
| THERMAL METRIC (1) | TPS631000 DRL - 8 PINS | UNIT | |
|---|---|---|---|
| R ΘJA | Junction-to-ambient thermal resistance | 132.7 | °C/W |
| R ΘJC(top) | Junction-to-case (top) thermal resistance | 43.8 | °C/W |
| R ΘJB | Junction-to-board thermal resistance | 27.3 | °C/W |
| Ψ JT | Junction-to-top characterization parameter | 1.2 | °C/W |
| Ψ JB | Junction-to-board characterization parameter | 26.6 | °C/W |
| R ΘJC(bot) | Junction-to-case (bottom) thermal resistance | N/A | °C/W |
TPS631000 Typical Application
The TPS631000 is a high-efficiency, low-quiescent current, buck-boost converter. The device is designed for applications needing a regulated output voltage from an input supply that can be higher or lower than the output voltage.
TPS631000 Package Information
| PART NUMBER | PACKAGE (1) | PACKAGE SIZE (2) |
|---|---|---|
| TPS631000 | DRL (SOT-5X3, 8) | 2.1mm × 1.6mm |
- (1) For more information, see Section 10.
- (2) The package size (length × width) is a nominal value and includes pins, where applicable.
Efficiency Target vs Output Current (VOUT = 3.3V)
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TPS631000DRLR | Texas Instruments | SOT-583 |
| TPS631000DRLR.A | Texas Instruments | — |
More datasheets
Ask your AI agent about the TPS631000
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TPS631000 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.