TPS62827ADMQR
Synchronous Step-Down ConverterThe TPS62827ADMQR is a synchronous step-down converter from Texas Instruments. View the full TPS62827ADMQR datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
TPS62827ADMQR shares its datasheet with TPS62827, whose page lists every part number it covers.
Official TPS62827ADMQR datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Synchronous Step-Down Converter
TPS62827ADMQR Key Specifications
| Parameter | Value |
|---|---|
| Output Current | 4A |
| Switching Frequency | 2.2MHz |
| Function | Step-Down |
| Height | 1 mm |
| Length | 1.5 mm |
| Lifecycle Status | Production (Last Updated: 1 day ago) |
| Manufacturer Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Max Duty Cycle | 100 % |
| Max Junction Temperature (Tj) | 125 °C |
| Max Operating Temperature | 125 °C |
| Max Supply Voltage | 5.5 V |
| Min Operating Temperature | -40 °C |
| Min Supply Voltage | 2.5 V |
| Mounting Type | Surface Mount |
| Nominal Supply Current | 4 µA |
| Number of Outputs | 1 |
| Number of Outputs | 1 |
| Number of Pins | 6 |
| Operating Temperature | -40°C ~ 125°C (TJ) |
| Output Configuration | Positive |
| Output Current | 4 A |
| Output Type | Adjustable |
| Package / Case | 6-VFDFN |
| Packaging | MouseReel |
| RoHS | Compliant |
| Schedule B | 8542390000 |
| Standard Pack Qty | 3000 |
| Supplier Device Package | 6-VSON-HR (1.5x1.5) |
| Switching Frequency | 2.2 MHz |
| Synchronous Rectifier | Yes |
| Thickness | 900 µm |
| Topology | Buck |
| Topology | Buck |
| Input Voltage (Max) | 5.5V |
| Input Voltage (Min) | 2.5V |
| Output Voltage (Max) | 4V |
| Output Voltage | 0.6V |
| Width | 1.5 mm |
TPS62827ADMQR Overview
Part: TPS62827 (TPS62827DMQR) — Texas Instruments
Type: Synchronous Step-Down (Buck) Converter
Description: 2.5–5.5 V input, 4 A synchronous step-down converter (TPS62827x) with DCS-Control, 0.6–4 V adjustable output, 1% feedback accuracy, 4 μA quiescent current and 2.2 MHz switching frequency in a 1.5 mm × 1.5 mm VSON-HR package.
Operating Conditions:
- Supply voltage: 2.5–5.5 V for TPS62827x (2.4–5.5 V for TPS62824x/25x/26x)
- Operating junction temperature: -40 to 125 °C
- Output voltage range: 0.6–4.0 V
- Output current range (TPS62827x): 0–4 A
Absolute Maximum Ratings:
- Voltage at VIN, FB, EN, PG: -0.3 to 6 V
- Voltage at SW (DC): -0.3 to VIN + 0.3 V
- Operating junction temperature: -40 to 150 °C
- Storage temperature: -65 to 150 °C
Key Specs:
- Feedback regulation voltage: 600 mV typ (594–606 mV), PWM mode
- Quiescent current: 4 μA typ, 10 μA max (EN high, no load, not switching); FPWM devices 8 mA typ
- Shutdown current: 0.05 μA typ, 0.5 μA max (EN low, TJ = -40 to 85 °C)
- High-side FET current limit (TPS62827x): 4.8 / 5.6 / 6.4 A (min/typ/max)
- RDS(on): 26 mΩ high-side, 25 mΩ low-side
- Switching frequency: 2.2 MHz typ (IOUT = 1 A, VOUT = 1.8 V)
- UVLO falling threshold: 2.2 V typ (2.1–2.3 V); hysteresis 160 mV
- Soft-start time (TPS62827): 1.75 ms typ
- Thermal shutdown: 150 °C typ, 20 °C hysteresis
- Power-good thresholds: 96% rising lower / 110% rising upper (typ), referenced to VFB
Features:
- DCS-Control topology with fast transient response
- 1% feedback accuracy over the full temperature range
- Up to 97% efficiency
- Power save mode for light-load efficiency (forced-PWM "A" versions available)
- 100% duty cycle for lowest dropout
- Active output discharge
- Power-good output
- Hiccup short-circuit protection and thermal shutdown
- Available as integrated-inductor power modules (TPSM82821, TPSM82822, TPSM82823)
- Small solution: 470 nH inductor, 4.7 μF input capacitor, 2 × 10 μF or 1 × 22 μF output capacitor
Applications:
- Solid state drives
- Portable electronics
- Analog security and IP network cameras
- Industrial PC
- Multifunction printers
- Generic point of load
Package:
- DMQ, 6-pin VSON-HR, 1.5 mm × 1.5 mm
TPS62827ADMQR Features
- Available as an integrated-inductor power module: TPSM82821, TPSM82822, and TPSM82823
- DCS-Control topology
- 1% feedback or output voltage accuracy (full temperature range)
- Up to 97% efficiency
- 26mΩ and 25mΩ internal power MOSFETs
- 2.4V to 5.5V input voltage range
- 4μA operating quiescent current
- 2.2MHz switching frequency
- 0.6V to 4V adjustable output voltage
- Power save mode for light load efficiency
- 100% duty cycle for lowest dropout
- Active output discharge
- Power-good output
- Thermal shutdown protection
- Hiccup short-circuit protection
- A forced-PWM version for CCM operation
- Create a custom design using the TPS6282x with the WEBENCH ® Power Designer
TPS62827ADMQR Applications
- Solid state drive
- Portable electronics
- Analog security and IP network cameras
- Industrial PC
- Multifunction printers
- Generic point of load
Typical Application Schematic
TPS62827ADMQR Pin Configuration
Figure 5-1. DMQ Package, 6-Pin VSON-HR (Bottom View)
Table 5-1. Pin Functions
| PIN | PIN | TYPE (1) | |
|---|---|---|---|
| NAME | NO. | TYPE (1) | DESCRIPTION |
| EN | 1 | I | Device enable pin. To enable the device, this pin must be pulled high. Pulling this pin low disables the device. Do not leave floating. |
| PG | 2 | O | Power-good open-drain output pin. The pullup resistor can be connected to voltages up to 5.5V. If unused, leave the pin floating. |
| FB | 3 | I | Feedback pin. For the fixed output voltage versions, this pin must be connected to the output. |
| GND | 4 | Ground pin | |
| SW | 5 | PWR | Switch pin of the power stage |
| VIN | 6 | PWR | Input voltage pin |
TPS62827ADMQR Electrical Characteristics
TJ = -40 °C to 125 °C, and VIN = 2.4 V to 5.5 V. Typical values are at T J = 25 °C and VIN = 5 V , unless otherwise noted.
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY |
| I Q | Quiescent current | EN = High, no load, device not switching | 4 | 10 | μA | |
| I Q | Quiescent current | EN = High, no load, FPWM devices | 8 | mA | ||
| I SD | Shutdown current | EN = Low, T J = -40 °C to 85 °C | 0.05 | 0.5 | μA | |
| V UVLO | Under voltage lock out threshold | V IN falling | 2.1 | 2.2 | 2.3 | V |
| V UVLO | Under voltage lock out hysteresis | V IN rising | 160 | mV | ||
| T JSD | Thermal shutdown threshold | T J rising | 150 | °C | ||
| T JSD | Thermal shutdown hysteresis | T J falling | 20 | °C | ||
| LOGIC INTERFACE EN | LOGIC INTERFACE EN | LOGIC INTERFACE EN | LOGIC INTERFACE EN | LOGIC INTERFACE EN | LOGIC INTERFACE EN | LOGIC INTERFACE EN |
| V IH | High-level threshold voltage | 1.0 | V | |||
| V IL | Low-level threshold voltage | 0.4 | V | |||
| I EN,LKG | Input leakage current into EN pin | EN = High | 0.01 | 0.1 | μA | |
| SOFT START, POWER GOOD | SOFT START, POWER GOOD | SOFT START, POWER GOOD | SOFT START, POWER GOOD | SOFT START, POWER GOOD | SOFT START, POWER GOOD | SOFT START, POWER GOOD |
| Soft start time | Time from EN high to 95% of V OUT nominal, TPS62827 | 1.75 | ms | |||
| t SS | Soft start time | Time from EN high to 95% of V OUT nominal, TPS62824x/5x/6x/7A | 1.25 | ms | ||
| V PG | Power good lower threshold | V PG rising, V FB referenced to V FB nominal | 94 | 96 | 98 | % |
| V PG | Power good lower threshold | V PG falling, V FB referenced to V FB nominal | 90 | 92 | 94 | % |
| V PG | Power good upper threshold | V PG rising, V FB referenced to V FB nominal | 108 | 110 | 112 | % |
| V PG | Power good upper threshold | V PG falling, V FB referenced to V FB nominal | 103 | 105 | 107 | % |
| V PG,OL | Low-level output voltage | I sink = 1 mA | 0.4 | V | ||
| I PG,LKG | Input leakage current into PG pin | V PG = 5.0 V | 0.01 | 0.1 | μA | |
| t PG,DLY | Power good deglitch delay | PG rising edge | 100 | μs | ||
| t PG,DLY | Power good deglitch delay | PG falling edge | 20 | |||
| OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT |
| V OUT | Output voltage accuracy | TPS6282533, PWM mode | 3.267 | 3.3 | 3.333 | V |
| V OUT | Output voltage accuracy | TPS6282x18, PWM mode | 1.78 | 1.8 | 1.82 | V |
| V FB | Feedback regulation voltage | PWM mode | 594 | 600 | 606 | mV |
| I FB,LKG | Feedback input leakage current for adjustable output voltage | V FB = 0.6 V | 0.01 | 0.05 | μA | |
| R FB | Internal resistor divider connected to FB pin, for fixed output votlage | TPS6282518, TPS6282618, TPS6282533 | 7.5 | MΩ | ||
| I DIS | Output discharge current | V SW = 0.4V; EN = LOW | 75 | 400 | mA | |
| I DIS | Load regulation | I OUT = 0.5 A to 3 A, V OUT = 1.8 V | 0.1 | %/A | ||
| POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH |
| R DS(on) | High-side FET on-resistance Low-side FET on-resistance | 26 25 | mΩ mΩ |
SLVSEF9I - MARCH 2018 - REVISED MARCH 2024
TPS62827ADMQR Absolute Maximum Ratings
Over operating junction temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Voltage at Pins (2) | VIN, FB, EN, PG | -0.3 | 6 | V |
| Voltage at Pins (2) | SW (DC) (4) | -0.3 | V IN + 0.3 | V |
| Voltage at Pins (2) | SW (DC, in current limit) | -1.0 | V IN + 0.3 | V |
| Voltage at Pins (2) | SW (AC, less than 10ns) (3) | -2.5 | 10 | V |
| Voltage at Pins (2) | SW (AC, PFM Mode, less than 100ns) (3) | -1.0 | V IN + 1.0 | V |
| Operating junction temperature, T J | -40 | 150 | °C | |
| Storage temperature, T stg | -65 | 150 | °C |
TPS62827ADMQR Recommended Operating Conditions
Over operating junction temperature range (unless otherwise noted)
| MIN | NOM | MAX | UNIT | ||
|---|---|---|---|---|---|
| V IN | Input voltage range, TPS62824x, TPS62825x and TPS62826x | 2.4 | 5.5 | V | |
| V IN | Input voltage range, TPS62827x | 2.5 | 5.5 | V | |
| V OUT | Output voltage range | 0.6 | 4.0 | V | |
| I OUT | Output current range, TPS62824x | 0 | 1 | A | |
| I OUT | Output current range, TPS62825x | 0 | 2 | A | |
| I OUT | Output current range, TPS62826x | 0 | 3 | A | |
| I OUT | Output current range, TPS62827x | 0 | 4 | A | |
| I SINK_PG | Sink current at PG pin | 1 | mA | ||
| V PG | Pull-up resistor voltage | 5.5 | V | ||
| T J | Operating junction temperature | -40 | 125 | °C |
TPS62827ADMQR Thermal Information
| (1) | THERMAL METRIC | DEVICE - TPS6282x, JEDEC - 6 pins | DEVICE - TPS62826EVM-794 - 6 pins | UNIT |
|---|---|---|---|---|
| R θJA | Junction-to-ambient thermal resistance | 129.5 | 71.4 | °C/W |
| R θJC(top) | Junction-to-case (top) thermal resistance | 103.9 | n/a (2) | °C/W |
| R θJB | Junction-to-board thermal resistance | 33.1 | n/a (2) | °C/W |
| ψ JT | Junction-to-top characterization parameter | 3.8 | 3.9 | °C/W |
TPS62827ADMQR Typical Application
The following section discusses the design of the external components to complete the power supply design for several input and output voltage options by using typical applications as a reference.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TPS62824 | Texas Instruments | — |
| TPS62824A | Texas Instruments | — |
| TPS62825 | Texas Instruments | — |
| TPS6282518 | Texas Instruments | — |
| TPS6282533 | Texas Instruments | — |
| TPS62825A | Texas Instruments | — |
| TPS62826 | Texas Instruments | — |
| TPS6282618 | Texas Instruments | — |
| TPS62826A | Texas Instruments | — |
| TPS62827 | Texas Instruments | — |
| TPS62827A | Texas Instruments | — |
| TPS62827ADMQ | Texas Instruments | — |
| TPS62827ADMQR.A | Texas Instruments | — |
| TPS62827DMQ | Texas Instruments | — |
| TPS62827DMQR | Texas Instruments | 6-VFDFN |
| TPS62827DMQR.A | Texas Instruments | — |
| TPS62827DMQT | Texas Instruments | — |
| TPS62827DMQT.A | Texas Instruments | — |
More datasheets
Ask your AI agent about the TPS62827ADMQR
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TPS62827ADMQR run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.