Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

TPS62824

Synchronous Step-Down Converter

The TPS62824 is a synchronous step-down converter from Texas Instruments. View the full TPS62824 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

TPS62824 shares its datasheet with TPS62827, whose page lists every part number it covers.

Official TPS62824 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Synchronous Step-Down Converter

TPS62824 Key Specifications

ParameterValue
Output Current4A
Switching Frequency2.2MHz
FunctionStep-Down
Height1 mm
Length1.5 mm
Lifecycle StatusProduction (Last Updated: 1 day ago)
Manufacturer Lifecycle StatusACTIVE (Last Updated: 1 day ago)
Max Duty Cycle100 %
Max Junction Temperature (Tj)125 °C
Max Operating Temperature125 °C
Max Supply Voltage5.5 V
Min Operating Temperature-40 °C
Min Supply Voltage2.5 V
Mounting TypeSurface Mount
Nominal Supply Current4 µA
Number of Outputs1
Number of Outputs1
Number of Pins6
Operating Temperature-40°C ~ 125°C (TJ)
Output ConfigurationPositive
Output Current4 A
Output TypeAdjustable
Package / Case6-VFDFN
PackagingMouseReel
RoHSCompliant
Schedule B8542390000
Standard Pack Qty3000
Supplier Device Package6-VSON-HR (1.5x1.5)
Switching Frequency2.2 MHz
Synchronous RectifierYes
Thickness900 µm
TopologyBuck
TopologyBuck
Input Voltage (Max)5.5V
Input Voltage (Min)2.5V
Output Voltage (Max)4V
Output Voltage0.6V
Width1.5 mm

TPS62824 Overview

Part: TPS62827 (TPS62827DMQR) — Texas Instruments

Type: Synchronous Step-Down (Buck) Converter

Description: 2.5–5.5 V input, 4 A synchronous step-down converter (TPS62827x) with DCS-Control, 0.6–4 V adjustable output, 1% feedback accuracy, 4 μA quiescent current and 2.2 MHz switching frequency in a 1.5 mm × 1.5 mm VSON-HR package.

Operating Conditions:

  • Supply voltage: 2.5–5.5 V for TPS62827x (2.4–5.5 V for TPS62824x/25x/26x)
  • Operating junction temperature: -40 to 125 °C
  • Output voltage range: 0.6–4.0 V
  • Output current range (TPS62827x): 0–4 A

Absolute Maximum Ratings:

  • Voltage at VIN, FB, EN, PG: -0.3 to 6 V
  • Voltage at SW (DC): -0.3 to VIN + 0.3 V
  • Operating junction temperature: -40 to 150 °C
  • Storage temperature: -65 to 150 °C

Key Specs:

  • Feedback regulation voltage: 600 mV typ (594–606 mV), PWM mode
  • Quiescent current: 4 μA typ, 10 μA max (EN high, no load, not switching); FPWM devices 8 mA typ
  • Shutdown current: 0.05 μA typ, 0.5 μA max (EN low, TJ = -40 to 85 °C)
  • High-side FET current limit (TPS62827x): 4.8 / 5.6 / 6.4 A (min/typ/max)
  • RDS(on): 26 mΩ high-side, 25 mΩ low-side
  • Switching frequency: 2.2 MHz typ (IOUT = 1 A, VOUT = 1.8 V)
  • UVLO falling threshold: 2.2 V typ (2.1–2.3 V); hysteresis 160 mV
  • Soft-start time (TPS62827): 1.75 ms typ
  • Thermal shutdown: 150 °C typ, 20 °C hysteresis
  • Power-good thresholds: 96% rising lower / 110% rising upper (typ), referenced to VFB

Features:

  • DCS-Control topology with fast transient response
  • 1% feedback accuracy over the full temperature range
  • Up to 97% efficiency
  • Power save mode for light-load efficiency (forced-PWM "A" versions available)
  • 100% duty cycle for lowest dropout
  • Active output discharge
  • Power-good output
  • Hiccup short-circuit protection and thermal shutdown
  • Available as integrated-inductor power modules (TPSM82821, TPSM82822, TPSM82823)
  • Small solution: 470 nH inductor, 4.7 μF input capacitor, 2 × 10 μF or 1 × 22 μF output capacitor

Applications:

  • Solid state drives
  • Portable electronics
  • Analog security and IP network cameras
  • Industrial PC
  • Multifunction printers
  • Generic point of load

Package:

  • DMQ, 6-pin VSON-HR, 1.5 mm × 1.5 mm

TPS62824 Features

  • Available as an integrated-inductor power module: TPSM82821, TPSM82822, and TPSM82823
  • DCS-Control topology
  • 1% feedback or output voltage accuracy (full temperature range)
  • Up to 97% efficiency
  • 26mΩ and 25mΩ internal power MOSFETs
  • 2.4V to 5.5V input voltage range
  • 4μA operating quiescent current
  • 2.2MHz switching frequency
  • 0.6V to 4V adjustable output voltage
  • Power save mode for light load efficiency
  • 100% duty cycle for lowest dropout
  • Active output discharge
  • Power-good output
  • Thermal shutdown protection
  • Hiccup short-circuit protection
  • A forced-PWM version for CCM operation
  • Create a custom design using the TPS6282x with the WEBENCH ® Power Designer

TPS62824 Applications

Typical Application Schematic

TPS62824 Pin Configuration

Figure 5-1. DMQ Package, 6-Pin VSON-HR (Bottom View)

Table 5-1. Pin Functions

PINPINTYPE (1)
NAMENO.TYPE (1)DESCRIPTION
EN1IDevice enable pin. To enable the device, this pin must be pulled high. Pulling this pin low disables the device. Do not leave floating.
PG2OPower-good open-drain output pin. The pullup resistor can be connected to voltages up to 5.5V. If unused, leave the pin floating.
FB3IFeedback pin. For the fixed output voltage versions, this pin must be connected to the output.
GND4Ground pin
SW5PWRSwitch pin of the power stage
VIN6PWRInput voltage pin

TPS62824 Electrical Characteristics

TJ = -40 °C to 125 °C, and VIN = 2.4 V to 5.5 V. Typical values are at T J = 25 °C and VIN = 5 V , unless otherwise noted.

PARAMETERPARAMETERTEST CONDITIONSMINTYPMAXUNIT
SUPPLYSUPPLYSUPPLYSUPPLYSUPPLYSUPPLYSUPPLY
I QQuiescent currentEN = High, no load, device not switching410μA
I QQuiescent currentEN = High, no load, FPWM devices8mA
I SDShutdown currentEN = Low, T J = -40 °C to 85 °C0.050.5μA
V UVLOUnder voltage lock out thresholdV IN falling2.12.22.3V
V UVLOUnder voltage lock out hysteresisV IN rising160mV
T JSDThermal shutdown thresholdT J rising150°C
T JSDThermal shutdown hysteresisT J falling20°C
LOGIC INTERFACE ENLOGIC INTERFACE ENLOGIC INTERFACE ENLOGIC INTERFACE ENLOGIC INTERFACE ENLOGIC INTERFACE ENLOGIC INTERFACE EN
V IHHigh-level threshold voltage1.0V
V ILLow-level threshold voltage0.4V
I EN,LKGInput leakage current into EN pinEN = High0.010.1μA
SOFT START, POWER GOODSOFT START, POWER GOODSOFT START, POWER GOODSOFT START, POWER GOODSOFT START, POWER GOODSOFT START, POWER GOODSOFT START, POWER GOOD
Soft start timeTime from EN high to 95% of V OUT nominal, TPS628271.75ms
t SSSoft start timeTime from EN high to 95% of V OUT nominal, TPS62824x/5x/6x/7A1.25ms
V PGPower good lower thresholdV PG rising, V FB referenced to V FB nominal949698%
V PGPower good lower thresholdV PG falling, V FB referenced to V FB nominal909294%
V PGPower good upper thresholdV PG rising, V FB referenced to V FB nominal108110112%
V PGPower good upper thresholdV PG falling, V FB referenced to V FB nominal103105107%
V PG,OLLow-level output voltageI sink = 1 mA0.4V
I PG,LKGInput leakage current into PG pinV PG = 5.0 V0.010.1μA
t PG,DLYPower good deglitch delayPG rising edge100μs
t PG,DLYPower good deglitch delayPG falling edge20
OUTPUTOUTPUTOUTPUTOUTPUTOUTPUTOUTPUTOUTPUT
V OUTOutput voltage accuracyTPS6282533, PWM mode3.2673.33.333V
V OUTOutput voltage accuracyTPS6282x18, PWM mode1.781.81.82V
V FBFeedback regulation voltagePWM mode594600606mV
I FB,LKGFeedback input leakage current for adjustable output voltageV FB = 0.6 V0.010.05μA
R FBInternal resistor divider connected to FB pin, for fixed output votlageTPS6282518, TPS6282618, TPS62825337.5MΩ
I DISOutput discharge currentV SW = 0.4V; EN = LOW75400mA
I DISLoad regulationI OUT = 0.5 A to 3 A, V OUT = 1.8 V0.1%/A
POWER SWITCHPOWER SWITCHPOWER SWITCHPOWER SWITCHPOWER SWITCHPOWER SWITCHPOWER SWITCH
R DS(on)High-side FET on-resistance
Low-side FET on-resistance
26
25
mΩ
mΩ

SLVSEF9I - MARCH 2018 - REVISED MARCH 2024

TPS62824 Absolute Maximum Ratings

Over operating junction temperature range (unless otherwise noted) (1)

MINMAXUNIT
Voltage at Pins (2)VIN, FB, EN, PG-0.36V
Voltage at Pins (2)SW (DC) (4)-0.3V IN + 0.3V
Voltage at Pins (2)SW (DC, in current limit)-1.0V IN + 0.3V
Voltage at Pins (2)SW (AC, less than 10ns) (3)-2.510V
Voltage at Pins (2)SW (AC, PFM Mode, less than 100ns) (3)-1.0V IN + 1.0V
Operating junction temperature, T J-40150°C
Storage temperature, T stg-65150°C

Over operating junction temperature range (unless otherwise noted)

MINNOMMAXUNIT
V INInput voltage range, TPS62824x, TPS62825x and TPS62826x2.45.5V
V INInput voltage range, TPS62827x2.55.5V
V OUTOutput voltage range0.64.0V
I OUTOutput current range, TPS62824x01A
I OUTOutput current range, TPS62825x02A
I OUTOutput current range, TPS62826x03A
I OUTOutput current range, TPS62827x04A
I SINK_PGSink current at PG pin1mA
V PGPull-up resistor voltage5.5V
T JOperating junction temperature-40125°C

TPS62824 Thermal Information

(1)THERMAL METRICDEVICE - TPS6282x, JEDEC - 6 pinsDEVICE - TPS62826EVM-794 - 6 pinsUNIT
R θJAJunction-to-ambient thermal resistance129.571.4°C/W
R θJC(top)Junction-to-case (top) thermal resistance103.9n/a (2)°C/W
R θJBJunction-to-board thermal resistance33.1n/a (2)°C/W
ψ JTJunction-to-top characterization parameter3.83.9°C/W

TPS62824 Typical Application

The following section discusses the design of the external components to complete the power supply design for several input and output voltage options by using typical applications as a reference.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
TPS62824ATexas Instruments—
TPS62825Texas Instruments—
TPS6282518Texas Instruments—
TPS6282533Texas Instruments—
TPS62825ATexas Instruments—
TPS62826Texas Instruments—
TPS6282618Texas Instruments—
TPS62826ATexas Instruments—
TPS62827Texas Instruments—
TPS62827ATexas Instruments—
TPS62827ADMQTexas Instruments—
TPS62827ADMQRTexas Instruments—
TPS62827ADMQR.ATexas Instruments—
TPS62827DMQTexas Instruments—
TPS62827DMQRTexas Instruments6-VFDFN
TPS62827DMQR.ATexas Instruments—
TPS62827DMQTTexas Instruments—
TPS62827DMQT.ATexas Instruments—

More datasheets

All Texas Instruments datasheets (2,670)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the TPS62824

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the TPS62824 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.