TPS562209DDCR.A
Synchronous Step-Down ConverterThe TPS562209DDCR.A is a synchronous step-down converter from Texas Instruments. View the full TPS562209DDCR.A datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
TPS562209DDCR.A shares its datasheet with TPS562209, whose page lists every part number it covers.
Official TPS562209DDCR.A datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Synchronous Step-Down Converter
TPS562209DDCR.A Key Specifications
| Parameter | Value |
|---|---|
| VFB threshold voltage | 758 / 765 / 772 mV (min/typ/max, TA = 25 °C, VO = 1.05 V) |
| High-side / low-side RDS(on) | 122 mΩ / 72 mΩ (TPS562209); 68 mΩ / 39 mΩ (TPS563209), TA = 25 °C |
| Operating non-switching supply current | 650 μA typ, 900 μA max (TA = 25 °C, EN = 5 V, VFB = 0.8 V) |
| Shutdown supply current | 3.0 μA typ, 10 μA max (TA = 25 °C, EN = 0 V) |
| Current limit | 2.5 / 3.2 / 4.3 A (L1 = 2.2 μH); 3.5 / 4.2 / 5.3 A (L1 = 1.5 μH) |
| EN thresholds | 1.6 V (high, min), 0.6 V (low, max) |
| UVLO wake-up VIN | 3.45 / 3.75 / 4.05 V (min/typ/max) |
| Soft-start time | 1.0 ms typ (0.7–1.3 ms) |
| Thermal shutdown | 155 °C typ, 35 °C hysteresis |
| Minimum off time | 260 ns typ; on time 150 ns typ (VIN = 12 V, VO = 1.05 V) |
TPS562209DDCR.A Overview
Part: TPS562209 / TPS563209 — Texas Instruments
Type: Synchronous Step-Down (Buck) Converter
Description: 4.5–17 V input, 2 A (TPS562209) / 3 A (TPS563209) synchronous step-down converter with integrated FETs, D-CAP2 mode control and 650 kHz switching frequency in a 6-pin SOT-23 package.
Operating Conditions:
- Supply voltage (VIN): 4.5–17 V
- Operating free-air temperature: -40 to 85 °C (junction temperature specified -40 to 150 °C)
- Output voltage range: 0.76–7 V
- Switching frequency: 650 kHz
Absolute Maximum Ratings:
- Max input voltage (VIN, EN): 19 V
- Max VBST voltage: 25 V (27.5 V for 10 ns transient)
- Max SW voltage: 19 V (21 V for 10 ns transient)
- Max junction temperature: 150 °C
- Storage temperature: -55 to 150 °C
Key Specs:
- VFB threshold voltage: 758 / 765 / 772 mV (min/typ/max, TA = 25 °C, VO = 1.05 V)
- High-side / low-side RDS(on): 122 mΩ / 72 mΩ (TPS562209); 68 mΩ / 39 mΩ (TPS563209), TA = 25 °C
- Operating non-switching supply current: 650 μA typ, 900 μA max (TA = 25 °C, EN = 5 V, VFB = 0.8 V)
- Shutdown supply current: 3.0 μA typ, 10 μA max (TA = 25 °C, EN = 0 V)
- Current limit: 2.5 / 3.2 / 4.3 A (L1 = 2.2 μH); 3.5 / 4.2 / 5.3 A (L1 = 1.5 μH)
- EN thresholds: 1.6 V (high, min), 0.6 V (low, max)
- UVLO wake-up VIN: 3.45 / 3.75 / 4.05 V (min/typ/max)
- Soft-start time: 1.0 ms typ (0.7–1.3 ms)
- Thermal shutdown: 155 °C typ, 35 °C hysteresis
- Minimum off time: 260 ns typ; on time 150 ns typ (VIN = 12 V, VO = 1.05 V)
Features:
- D-CAP2 mode control for fast transient response, no external compensation
- Supports low-ESR polymer and ceramic output capacitors
- Always operates in continuous conduction mode
- 1% feedback voltage accuracy at 25 °C
- Startup from pre-biased output voltage
- Cycle-by-cycle over-current limit
- Hiccup-mode undervoltage protection
- Non-latch OVP, UVLO and thermal shutdown protections
- Fixed 1.0 ms soft start
Applications:
- Digital TV power supply
- High-definition Blu-ray Disc players
- Networking home terminal
- Digital set-top box (STB)
Package:
- SOT (DDC), 6-pin, 1.60 mm × 2.90 mm
TPS562209DDCR.A Features
- 1 · TPS562209 - 2A converter with integrated 122-m Ω and 72-m Ω FETs
- TPS563209 - 3A converter with integrated 68-m Ω and 39-m Ω FETs
- D-CAP2™ Mode Control for Fast Transient Response
- Input Voltage Range: 4.5 V to 17 V
- Output Voltage Range: 0.76 V to 7 V
- 650 kHz Switching Frequency
- Low Shutdown Current Less than 10μA
- 1% Feedback Voltage Accuracy (25°C)
- Startup from Pre-Biased Output Voltage
- Cycle By Cycle Over-current Limit
- Hiccup-mode Under Voltage Protection
- Non-latch OVP, UVLO and TSD Protections
- ·
- Fixed Soft Start : 1.0ms
TPS562209DDCR.A Applications
- Digital TV Power Supply
- High Definition Blu-ray Disc™ Players
- Networking Home Terminal
- Digital Set Top Box (STB)
spacer
spacer
TPS562209DDCR.A Pin Configuration
TPS562209DDCR.A Electrical Characteristics
TJ = -40°C to 150°C, VIN = 12V (unless otherwise noted)
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| SUPPLY CURRENT | SUPPLY CURRENT | |||||
| I VIN | Operating - non-switching supply current | V IN current, T A = 25°C, EN = 5V, VFB = 0.8 V | 650 | 900 | μA μA | |
| I VINSDN | Shutdown supply current | V IN current, T A = 25°C, EN = 0 V | 3.0 | 10 | μA | |
| LOGIC THRESHOLD | LOGIC THRESHOLD | |||||
| V ENH | EN high-level input voltage | EN | 1.6 | V | ||
| V ENL | EN low-level input voltage | EN | 0.6 | V | ||
| R EN | EN pin resistance to GND | V EN = 12 V | 225 | 450 | 900 | k Ω |
| V FB VOLTAGE AND DISCHARGE RESISTANCE | V FB VOLTAGE AND DISCHARGE RESISTANCE | |||||
| V FBTH | V FB threshold voltage | T A = 25°C, V O = 1.05 V, continuous mode operation | 758 | 765 | 772 | mV |
| I VFB | V FB input current | V FB = 0.8V, T A = 25°C | 0 | ±0.1 | mA | |
| MOSFET | MOSFET | |||||
| R DS(on)h | High side switch resistance | T A = 25°C, V BST - SW = 5.5 V (TPS562209) T A = 25°C, V BST - SW = 5.5 V (TPS563209) | 122 68 | m Ω | ||
| R | Low side switch resistance | T A = 25°C (TPS562209) | 72 | m Ω | ||
| DS(on)l | T A = 25°C (TPS563209) | 39 | ||||
| CURRENT LIMIT | CURRENT LIMIT | |||||
| I | Current limit (1) | DC current, VOUT = 1.05V , L1 = 2.2 μH | 2.5 | 3.2 | 4.3 | A |
| ocl | DC current, VOUT = 1.05V , L1 = 1.5 μH | 3.5 | 4.2 | 5.3 | ||
| THERMAL SHUTDOWN | THERMAL SHUTDOWN | |||||
| T SDN | Thermal shutdown threshold (1) | Shutdown temperature | 155 35 | °C | ||
| ON-TIME | TIMER CONTROL | Hysteresis | 310 | ns | ||
| t ON | On time | VIN = 12 V, VO = 1.05 V | 150 | ns | ||
| t OFF(MIN) | Minimum off time | T A = 25°C, V FB = 0.5 V | 260 | |||
| SOFT START | SOFT START | |||||
| T ss OUTPUT | Soft -start time UNDERVOLTAGE AND OVERVOLTAGE | Internal soft-start time, T A = 25°C PROTECTION | 0.7 | 1.0 125%x | 1.3 | ms |
| V UVP | Output UVP threshold | Hiccup detect | 65%xVf bth | |||
| T HiccupOn | Hiccup Power On Time | Relative to soft start time | 1 | ms | ||
| T HiccupOff | Hiccup Power Off Time | Relative to soft start time | 7 | ms | ||
| UVLO | UVLO | |||||
| Wake up VIN voltage | 3.45 | 3.75 | 4.05 | V | ||
| UVLO | UVLO threshold | Hysteresis VIN voltage | 0.13 | 0.32 | 0.55 |
TPS562209DDCR.A Absolute Maximum Ratings
TJ = -40°C to 150°C (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Input voltage range | VIN, EN | -0.3 | 19 | V |
| Input voltage range | VBST | -0.3 | 25 | V |
| Input voltage range | VBST (10 ns transient) | -0.3 | 27.5 | V |
| Input voltage range | VBST (vs SW) | -0.3 | 6.5 | V |
| Input voltage range | VFB, | -0.3 | 6.5 | V |
| Input voltage range | SW | -2 | 19 | V |
| Input voltage range | SW (10 ns transient) | -3.5 | 21 | V |
| Operating junction temperature, T J | Operating junction temperature, T J | -40 | 150 | °C |
| Storage temperature, T stg | Storage temperature, T stg | -55 | 150 | °C |
TPS562209DDCR.A Recommended Operating Conditions
TJ = -40°C to 150°C (unless otherwise noted)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| V IN | Supply input voltage range | 4.5 | 17 | V |
| V I | range VBST EN | -0.1 | 23 | |
| V I | VBST (10 ns transient) | -0.1 | 26 | |
| V I | VBST(vs SW) | -0.1 | 6.0 | |
| V I | Input voltage | -0.1 | 17 | V |
| V I | VFB | -0.1 | 5.5 | |
| V I | SW | -1.8 | 17 | |
| V I | SW (10 ns transient) | -3.5 | 20 | |
| T A | Operating free-air temperature -40 | Operating free-air temperature -40 | 85 | °C |
TPS562209DDCR.A Thermal Information
| THERMAL (1) - METRIC | TPS562209 - DDC (6 PINS) | TPS563209 - DDC (6 PINS) | UNIT | |
|---|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance | 109.2 | 87.9 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance | 44.5 | 42.2 | °C/W |
| R θ JB | Junction-to-board thermal resistance | 13.4 | 13.6 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 2.3 | 1.9 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 60.4 | 13.3 | °C/W |
TPS562209DDCR.A Typical Application
The TPS562209 and TPS563209 are typically used as step down converters, which convert a voltage from 4.5V - 17V to a lower voltage. Webench software is available to aid in the design and analysis of circuits
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TPS562209 | Texas Instruments | SOT-23-6 1.6x2.9mm |
| TPS562209DDCR | Texas Instruments | SOT-23-THIN-6 |
| TPS562209DDCR.B | Texas Instruments | — |
| TPS562209DDCT | Texas Instruments | |
| TPS562209DDCT.A | Texas Instruments | — |
| TPS562209DDCT.B | Texas Instruments | — |
| TPS563209 | Texas Instruments | SOT (6) |
| TPS56X209 | Texas Instruments | — |
More datasheets
Ask your AI agent about the TPS562209DDCR.A
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TPS562209DDCR.A run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.