TPS562209
Synchronous Step-Down ConverterThe TPS562209 is a synchronous step-down converter from Texas Instruments. View the full TPS562209 datasheet below including key specifications, pinout, electrical characteristics, absolute maximum ratings.
Official TPS562209 datasheet (PDF) — the source this page was extracted from.
TPS562209 Key Specifications
| Parameter | Value |
|---|---|
| Soft Start | 1.0 ms fixed |
| Control Mode | D-CAP2 |
| Output Current | 2A |
| Feedback Voltage | 765 mV typ (1% accuracy at 25°C) |
| Low-Side RDS(On) | 72 mΩ |
| High-Side RDS(On) | 122 mΩ |
| Package Dimensions | 1.60 mm x 2.90 mm |
| Input Voltage Range | 4.5V to 17V |
| Switching Frequency | 650 kHz |
| Output Voltage Range | 0.76V to 7V |
| Shutdown Supply Current | 3.0 µA typ, 10 µA max |
| Junction Temperature Range | -40°C to 150°C |
| Operating Free-Air Temperature | -40°C to 85°C |
| Operating Supply Current (Non-Switching) | 650 µA typ |
TPS562209 Overview
Part: TPS562209 / TPS563209 — Texas Instruments
Type: Synchronous Step-Down (Buck) Converter
Description: 4.5–17 V input, 2 A (TPS562209) / 3 A (TPS563209) synchronous step-down converter with integrated FETs, D-CAP2 mode control and 650 kHz switching frequency in a 6-pin SOT-23 package.
Operating Conditions:
- Supply voltage (VIN): 4.5–17 V
- Operating free-air temperature: -40 to 85 °C (junction temperature specified -40 to 150 °C)
- Output voltage range: 0.76–7 V
- Switching frequency: 650 kHz
Absolute Maximum Ratings:
- Max input voltage (VIN, EN): 19 V
- Max VBST voltage: 25 V (27.5 V for 10 ns transient)
- Max SW voltage: 19 V (21 V for 10 ns transient)
- Max junction temperature: 150 °C
- Storage temperature: -55 to 150 °C
Key Specs:
- VFB threshold voltage: 758 / 765 / 772 mV (min/typ/max, TA = 25 °C, VO = 1.05 V)
- High-side / low-side RDS(on): 122 mΩ / 72 mΩ (TPS562209); 68 mΩ / 39 mΩ (TPS563209), TA = 25 °C
- Operating non-switching supply current: 650 μA typ, 900 μA max (TA = 25 °C, EN = 5 V, VFB = 0.8 V)
- Shutdown supply current: 3.0 μA typ, 10 μA max (TA = 25 °C, EN = 0 V)
- Current limit: 2.5 / 3.2 / 4.3 A (L1 = 2.2 μH); 3.5 / 4.2 / 5.3 A (L1 = 1.5 μH)
- EN thresholds: 1.6 V (high, min), 0.6 V (low, max)
- UVLO wake-up VIN: 3.45 / 3.75 / 4.05 V (min/typ/max)
- Soft-start time: 1.0 ms typ (0.7–1.3 ms)
- Thermal shutdown: 155 °C typ, 35 °C hysteresis
- Minimum off time: 260 ns typ; on time 150 ns typ (VIN = 12 V, VO = 1.05 V)
Features:
- D-CAP2 mode control for fast transient response, no external compensation
- Supports low-ESR polymer and ceramic output capacitors
- Always operates in continuous conduction mode
- 1% feedback voltage accuracy at 25 °C
- Startup from pre-biased output voltage
- Cycle-by-cycle over-current limit
- Hiccup-mode undervoltage protection
- Non-latch OVP, UVLO and thermal shutdown protections
- Fixed 1.0 ms soft start
Applications:
- Digital TV power supply
- High-definition Blu-ray Disc players
- Networking home terminal
- Digital set-top box (STB)
Package:
- SOT (DDC), 6-pin, 1.60 mm × 2.90 mm
TPS562209 Features
- 1 · TPS562209 - 2A converter with integrated 122-m Ω and 72-m Ω FETs
- TPS563209 - 3A converter with integrated 68-m Ω and 39-m Ω FETs
- D-CAP2™ Mode Control for Fast Transient Response
- Input Voltage Range: 4.5 V to 17 V
- Output Voltage Range: 0.76 V to 7 V
- 650 kHz Switching Frequency
- Low Shutdown Current Less than 10μA
- 1% Feedback Voltage Accuracy (25°C)
- Startup from Pre-Biased Output Voltage
- Cycle By Cycle Over-current Limit
- Hiccup-mode Under Voltage Protection
- Non-latch OVP, UVLO and TSD Protections
- ·
- Fixed Soft Start : 1.0ms
TPS562209 Applications
- Digital TV Power Supply
- High Definition Blu-ray Disc™ Players
- Networking Home Terminal
- Digital Set Top Box (STB)
spacer
spacer
TPS562209 Pin Configuration
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | GND | - | Ground pin Source terminal of low-side power NFET as well as the ground terminal for controller circuit. Connect sensitive VFB to this GND at a single point. |
| 2 | SW | - | Switch node connection between high-side NFET and low-side NFET. |
| 3 | VIN | - | Input voltage supply pin. The drain terminal of high-side power NFET. |
| 4 | VFB | - | Converter feedback input. Connect to output voltage with feedback resistor divider. |
| 5 | EN | - | Enable input control. Active high and must be pulled up to enable the device. |
| 6 | VBST | - | Supply input for the high-side NFET gate drive circuit. Connect 0.1 µF capacitor between VBST and SW pins. |
TPS562209 Electrical Characteristics
TJ = -40°C to 150°C, VIN = 12V (unless otherwise noted)
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| SUPPLY CURRENT | SUPPLY CURRENT | |||||
| I VIN | Operating - non-switching supply current | V IN current, T A = 25°C, EN = 5V, VFB = 0.8 V | 650 | 900 | μA μA | |
| I VINSDN | Shutdown supply current | V IN current, T A = 25°C, EN = 0 V | 3.0 | 10 | μA | |
| LOGIC THRESHOLD | LOGIC THRESHOLD | |||||
| V ENH | EN high-level input voltage | EN | 1.6 | V | ||
| V ENL | EN low-level input voltage | EN | 0.6 | V | ||
| R EN | EN pin resistance to GND | V EN = 12 V | 225 | 450 | 900 | k Ω |
| V FB VOLTAGE AND DISCHARGE RESISTANCE | V FB VOLTAGE AND DISCHARGE RESISTANCE | |||||
| V FBTH | V FB threshold voltage | T A = 25°C, V O = 1.05 V, continuous mode operation | 758 | 765 | 772 | mV |
| I VFB | V FB input current | V FB = 0.8V, T A = 25°C | 0 | ±0.1 | mA | |
| MOSFET | MOSFET | |||||
| R DS(on)h | High side switch resistance | T A = 25°C, V BST - SW = 5.5 V (TPS562209) T A = 25°C, V BST - SW = 5.5 V (TPS563209) | 122 68 | m Ω | ||
| R | Low side switch resistance | T A = 25°C (TPS562209) | 72 | m Ω | ||
| DS(on)l | T A = 25°C (TPS563209) | 39 | ||||
| CURRENT LIMIT | CURRENT LIMIT | |||||
| I | Current limit (1) | DC current, VOUT = 1.05V , L1 = 2.2 μH | 2.5 | 3.2 | 4.3 | A |
| ocl | DC current, VOUT = 1.05V , L1 = 1.5 μH | 3.5 | 4.2 | 5.3 | ||
| THERMAL SHUTDOWN | THERMAL SHUTDOWN | |||||
| T SDN | Thermal shutdown threshold (1) | Shutdown temperature | 155 35 | °C | ||
| ON-TIME | TIMER CONTROL | Hysteresis | 310 | ns | ||
| t ON | On time | VIN = 12 V, VO = 1.05 V | 150 | ns | ||
| t OFF(MIN) | Minimum off time | T A = 25°C, V FB = 0.5 V | 260 | |||
| SOFT START | SOFT START | |||||
| T ss OUTPUT | Soft -start time UNDERVOLTAGE AND OVERVOLTAGE | Internal soft-start time, T A = 25°C PROTECTION | 0.7 | 1.0 125%x | 1.3 | ms |
| V UVP | Output UVP threshold | Hiccup detect | 65%xVf bth | |||
| T HiccupOn | Hiccup Power On Time | Relative to soft start time | 1 | ms | ||
| T HiccupOff | Hiccup Power Off Time | Relative to soft start time | 7 | ms | ||
| UVLO | UVLO | |||||
| Wake up VIN voltage | 3.45 | 3.75 | 4.05 | V | ||
| UVLO | UVLO threshold | Hysteresis VIN voltage | 0.13 | 0.32 | 0.55 |
TPS562209 Absolute Maximum Ratings
TJ = -40°C to 150°C (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Input voltage range | VIN, EN | -0.3 | 19 | V |
| Input voltage range | VBST | -0.3 | 25 | V |
| Input voltage range | VBST (10 ns transient) | -0.3 | 27.5 | V |
| Input voltage range | VBST (vs SW) | -0.3 | 6.5 | V |
| Input voltage range | VFB, | -0.3 | 6.5 | V |
| Input voltage range | SW | -2 | 19 | V |
| Input voltage range | SW (10 ns transient) | -3.5 | 21 | V |
| Operating junction temperature, T J | Operating junction temperature, T J | -40 | 150 | °C |
| Storage temperature, T stg | Storage temperature, T stg | -55 | 150 | °C |
TPS562209 Recommended Operating Conditions
TJ = -40°C to 150°C (unless otherwise noted)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| V IN | Supply input voltage range | 4.5 | 17 | V |
| V I | range VBST EN | -0.1 | 23 | |
| V I | VBST (10 ns transient) | -0.1 | 26 | |
| V I | VBST(vs SW) | -0.1 | 6.0 | |
| V I | Input voltage | -0.1 | 17 | V |
| V I | VFB | -0.1 | 5.5 | |
| V I | SW | -1.8 | 17 | |
| V I | SW (10 ns transient) | -3.5 | 20 | |
| T A | Operating free-air temperature -40 | Operating free-air temperature -40 | 85 | °C |
TPS562209 Thermal Information
| THERMAL (1) - METRIC | TPS562209 - DDC (6 PINS) | TPS563209 - DDC (6 PINS) | UNIT | |
|---|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance | 109.2 | 87.9 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance | 44.5 | 42.2 | °C/W |
| R θ JB | Junction-to-board thermal resistance | 13.4 | 13.6 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 2.3 | 1.9 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 60.4 | 13.3 | °C/W |
TPS562209 Typical Application
The TPS562209 and TPS563209 are typically used as step down converters, which convert a voltage from 4.5V - 17V to a lower voltage. Webench software is available to aid in the design and analysis of circuits
TPS562209 Ordering Information
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| TPS563209, TPS562209 | SOT (6) | 1.60 mm × 2.90 mm |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TPS562209DDCR | Texas Instruments | SOT-23-THIN-6 |
| TPS562209DDCR.A | Texas Instruments | — |
| TPS562209DDCR.B | Texas Instruments | — |
| TPS562209DDCT | Texas Instruments | |
| TPS562209DDCT.A | Texas Instruments | — |
| TPS562209DDCT.B | Texas Instruments | — |
| TPS563209 | Texas Instruments | SOT (6) |
| TPS56X209 | Texas Instruments | — |
More datasheets
Ask your AI agent about the TPS562209
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TPS562209 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.