TPS22919DCK
Self-Protected Load SwitchThe TPS22919DCK is a self-protected load switch from Texas Instruments. View the full TPS22919DCK datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
TPS22919DCK shares its datasheet with TPS22919, whose page lists every part number it covers.
Official TPS22919DCK datasheet (PDF) — the source this page was extracted from.
TPS22919DCK Key Specifications
| Parameter | Value |
|---|---|
| Packaging | MouseReel |
| Standard Pack Qty | 3000 |
| On-resistance (RON) | 89 mΩ typical (125 mΩ max) at VIN = 5 V, TJ = 25 °C |
| On-resistance (RON) | 90 mΩ typical (150 mΩ max) at VIN = 3.6 V, TJ = 25 °C |
| On-resistance (RON) | 105 mΩ typical (300 mΩ max) at VIN = 1.8 V, TJ = 25 °C |
| Quiescent current (IQ, VIN) | 8 μA typical, 15 μA max at VIN = 3.6 V, TJ = 25 °C (20 μA max over -40 to 125 °C) |
| Shutdown current (ISD, VIN) | 2 nA typical, 20 nA max at VIN = 3.6 V, TJ = 25 °C (800 nA max over -40 to 125 °C) |
| Short-circuit current limit (ISC) | 3 A typical (VOUT ≤ VIN - 1.5 V); 500 mA typical (30 to 900 mA) when VOUT ≤ VSC |
| Turn-on time (tON) | 1750 μs typical at VIN = 3.6 V (1950 μs at 5.0 V, 1500 μs at 1.8 V) |
| Internal QOD resistance (RPD, QOD) | 24 Ω typical |
TPS22919DCK Overview
Part: TPS22919 — Texas Instruments
Type: Self-Protected Load Switch
Description: 1.6 V to 5.5 V input, 1.5 A single-channel load switch with controlled slew rate, integrated output short-circuit protection, thermal shutdown, and adjustable quick output discharge.
Operating Conditions:
- Supply voltage: 1.6 to 5.5 V
- Operating temperature: -40 to 105 °C (ambient)
Absolute Maximum Ratings:
- Max supply voltage: 6 V
- Max continuous current: 1.5 A
- Max junction/storage temperature: -65 to 150 °C (storage temperature; junction temperature is internally limited)
Key Specs:
- On-resistance (RON): 89 mΩ typical (125 mΩ max) at VIN = 5 V, TJ = 25 °C
- On-resistance (RON): 90 mΩ typical (150 mΩ max) at VIN = 3.6 V, TJ = 25 °C
- On-resistance (RON): 105 mΩ typical (300 mΩ max) at VIN = 1.8 V, TJ = 25 °C
- Quiescent current (IQ, VIN): 8 μA typical, 15 μA max at VIN = 3.6 V, TJ = 25 °C (20 μA max over -40 to 125 °C)
- Shutdown current (ISD, VIN): 2 nA typical, 20 nA max at VIN = 3.6 V, TJ = 25 °C (800 nA max over -40 to 125 °C)
- Short-circuit current limit (ISC): 3 A typical (VOUT ≤ VIN - 1.5 V); 500 mA typical (30 to 900 mA) when VOUT ≤ VSC
- Turn-on time (tON): 1750 μs typical at VIN = 3.6 V (1950 μs at 5.0 V, 1500 μs at 1.8 V)
- Internal QOD resistance (RPD, QOD): 24 Ω typical
Features:
- Controlled slew rate to limit inrush current
- Smart ON pin pull-down to eliminate floating inputs without steady-state power loss
- Self-protected with output short-circuit limit and thermal shutdown
- Configurable quick output discharge (QOD) pin
Applications:
- Personal electronics
- Set top box
- HDTV
- Multi function printer
Package:
- SC-70 (6) (2.1 mm × 2.0 mm nominal body size, package designator DCK)
TPS22919DCK Features
- 1 · Input operating voltage range (VIN): 1.6 V to 5.5 V
- Maximum continuous current (IMAX): 1.5 A
- On-Resistance (RON):
- -5-V VIN: 89 m Ω (typical)
- -3.6-V VIN: 90 m Ω (typical)
- -1.8-V VIN: 105 m Ω (typical)
- Output short protection (ISC): 3 A (typical)
- Low power consumption:
- -ON state (IQ): 8 μA (typical)
- -OFF state (ISD): 2 nA (typical)
- Smart ON pin pull down (RPD):
- -ON ≥ VIH (ION): 100 nA (maximum)
- -ON ≤ VIL (RPD): 530 k Ω (typical)
- Slow Turn ON timing to limit inrush current (tON):
- -5.0 V Turn ON time (tON): 1.95 ms at 3.2 mV/ μ s
- -3.6 V Turn ON time (tON): 1.75 ms at 2.7 mV/ μ s
- -1.8 V Turn ON time (tON): 1.5 ms at 1.8 mV/ μ s
- Adjustable output discharge and fall time:
- -Internal QOD resistance = 24 Ω (typical)
1
TPS22919DCK Applications
- Personal electronics
- Set top box
- HDTV
- Multi function printer
TPS22919DCK Pin Configuration
TPS22919DCK Electrical Characteristics
Typical values at VIN = 3.6V unless otherwise specified
| PARAMETER | PARAMETER | TEST CONDITIONS | T J | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|---|---|
| Input Supply (VIN) | Input Supply (VIN) | Input Supply (VIN) | Input Supply (VIN) | Input Supply (VIN) | Input Supply (VIN) | Input Supply (VIN) | Input Supply (VIN) | Input Supply (VIN) |
| I Q, VIN | VIN Quiescent Current | V ON ≥ V IH , VOUT = Open | 25°C | 8 | 15 | μA | ||
| I Q, VIN | -40°C to 125°C | 20 | μA | |||||
| I SD, VIN | VIN Shutdown Current | V ON ≤ V IL , VOUT = GND | 25°C | 2 | 20 | nA | ||
| I SD, VIN | -40°C to 125°C | 800 | nA | |||||
| ON-Resistance (RON) | ON-Resistance (RON) | ON-Resistance (RON) | ON-Resistance (RON) | ON-Resistance (RON) | ON-Resistance (RON) | ON-Resistance (RON) | ON-Resistance (RON) | ON-Resistance (RON) |
| V IN = 5 V V IN = 5 V IN = 5 | 25°C -40°C to 85°C -40°C to 105°C -40°C to 125°C | 89 | 125 150 175 200 | m Ω m Ω m Ω m Ω | ||||
| R ON | -200 mA V IN = 3.6 | 25°C | 90 | 150 | m Ω | |||
| R ON | -200 mA V IN = 3.6 | -40°C to 85°C | 200 | m Ω | ||||
| R ON | ON-State Resistance | -200 mA V IN = 3.6 | -40°C to 105°C | 225 | m Ω | |||
| R ON | -200 mA V IN = 3.6 | -40°C to 125°C | 250 | m Ω | ||||
| R ON | 25°C | 105 | 300 | m Ω | ||||
| R ON | V = 1.8 | -40°C to 85°C | 400 | m Ω | ||||
| R ON | IN | -40°C to 105°C | 450 | m Ω | ||||
| R ON | -40°C to 125°C | 500 | m Ω | |||||
| Output Short Protection (ISC) | Output Short Protection (ISC) | Output Short Protection (ISC) | Output Short Protection (ISC) | Output Short Protection (ISC) | Output Short Protection (ISC) | Output Short Protection (ISC) | Output Short Protection (ISC) | Output Short Protection (ISC) |
| I SC | Short Circuit Current Limit | V OUT ≤ V IN - 1.5 V | -40°C to 125°C | 3 | A | |||
| I SC | V OUT ≤ V SC | -40°C to 125°C | 30 | 500 | 900 | mA | ||
| V SC | Output Short Detection Threshold | V IN - V OUT | -40°C to 125°C | 0.3 | 0.36 | 0.46 | V | |
| t SC | Output Short Reponse Time | V IN = 1.6V to 5.5V, 10m Ω short applied | -40°C to 125°C | 2 | μs | |||
| T | Thermal Shutdown | Rising | 180 | °C | ||||
| SD | Falling | 145 | °C | |||||
| Enable Pin (ON) | Enable Pin (ON) | Enable Pin (ON) | Enable Pin (ON) | Enable Pin (ON) | Enable Pin (ON) | Enable Pin (ON) | Enable Pin (ON) | Enable Pin (ON) |
| I ON | ON Pin Leakage | V ON ≥ V IH | -40°C to 125°C | 100 | nA | |||
| R PD, ON | Smart Pull Down Resistance | V ON ≤ V IL | -40°C to 125°C | 530 | k Ω | |||
| Quick-output Discharge (QOD) | Quick-output Discharge (QOD) | Quick-output Discharge (QOD) | Quick-output Discharge (QOD) | Quick-output Discharge (QOD) | Quick-output Discharge (QOD) | Quick-output Discharge (QOD) | Quick-output Discharge (QOD) | Quick-output Discharge (QOD) |
| R PD, QOD | QOD Pin Internal Discharge Resistance | V ON ≤ V IL | -40°C to 125°C | 24 | Ω |
TPS22919DCK Absolute Maximum Ratings
Over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| V IN | Maximum Input Voltage Range | -0.3 | 6 | V |
| V OUT | Maximum Output Voltage Range | -0.3 | 6 | V |
| V ON | Maximum ON Pin Voltage Range | -0.3 | 6 | V |
| V QOD | Maximum QOD Pin Voltage Range | -0.3 | 6 | V |
| I MAX | Maximum Continuous Current | 1.5 | A | |
| I PLS | Maximum Pulsed Current (2 ms, 2% Duty Cycle) | 2.5 | A | |
| T J | Junction temperature | Internally Limited | Internally Limited | °C |
| T STG | Storage temperature | -65 | 150 | °C |
| T LEAD | Maximum Lead Temperature (10 s soldering time) | 300 | °C |
TPS22919DCK Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
| MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|
| V IN | Input Voltage Range | 1.6 | 5.5 | V | |
| V OUT | Output Voltage Range | 0 | 5.5 | V | |
| V IH | ON Pin High Voltage Range | 1 | 5.5 | V | |
| V IL | ON Pin Low Voltage Range | 0 | 0.35 | V | |
| T A | Ambient Temperature | -40 | 105 | °C |
TPS22919DCK Thermal Information
| THERMAL METRIC (1) | THERMAL METRIC (1) | TPS22919 DCK (SC-70) PINS | UNIT |
|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance | 210.7 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance | 142.0 | °C/W |
| R θ JB | Junction-to-board thermal resistance | 69.0 | °C/W |
| Ψ JT | Junction-to-top characterization parameter | 52.7 | °C/W |
| Ψ JB | Junction-to-board characterization parameter | 68.8 | °C/W |
TPS22919DCK Typical Application
This section highlights some of the design considerations when implementing this device in various applications.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TPS22919 | Texas Instruments | SC-70-6 |
| TPS22919-Q1 | Texas Instruments | SC-70-6 |
| TPS22919DCKR | Texas Instruments | SC-70-6 |
| TPS22919DCKR.A | Texas Instruments | SC-70-5 |
| TPS22919DCKT | Texas Instruments | SC-70-6 |
| TPS22919DCKT.A | Texas Instruments | SC-70-5 |
More datasheets
Ask your AI agent about the TPS22919DCK
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TPS22919DCK run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.