Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

TPS22919-Q1

Self-Protected Load Switch

The TPS22919-Q1 is a self-protected load switch from Texas Instruments. View the full TPS22919-Q1 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

TPS22919-Q1 shares its datasheet with TPS22919, whose page lists every part number it covers.

Official TPS22919-Q1 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Self-Protected Load Switch

Package

SC-70-6

TPS22919-Q1 Key Specifications

ParameterValue
PackagingMouseReel
Standard Pack Qty3000
Package Body Size2.1 mm × 2.0 mm
Turn-On Time At 5V1.95 ms
Maximum Pulsed Current2.5A (2 ms, 2% duty cycle)
ON Pin Low Voltage (VIL)0.35V max
Input Voltage Range (VIN)1.6V to 5.5V
ON Pin High Voltage (VIH)1V min
Junction Temperature Range-40°C to 125°C
Maximum Continuous Current1.5A
Short Circuit Current Limit3A typical
Quiescent Current (ON State)8 µA typical
Shutdown Current (OFF State)2 nA typical
On-Resistance (RON) At VIN=5V89 mΩ typical
On-Resistance (RON) At VIN=1.8V105 mΩ typical
On-Resistance (RON) At VIN=3.6V90 mΩ typical
Quick Output Discharge Resistance24 Ω typical

TPS22919-Q1 Overview

Part: TPS22919 — Texas Instruments

Type: Self-Protected Load Switch

Description: 1.6 V to 5.5 V input, 1.5 A single-channel load switch with controlled slew rate, integrated output short-circuit protection, thermal shutdown, and adjustable quick output discharge.

Operating Conditions:

  • Supply voltage: 1.6 to 5.5 V
  • Operating temperature: -40 to 105 °C (ambient)

Absolute Maximum Ratings:

  • Max supply voltage: 6 V
  • Max continuous current: 1.5 A
  • Max junction/storage temperature: -65 to 150 °C (storage temperature; junction temperature is internally limited)

Key Specs:

  • On-resistance (RON): 89 mΩ typical (125 mΩ max) at VIN = 5 V, TJ = 25 °C
  • On-resistance (RON): 90 mΩ typical (150 mΩ max) at VIN = 3.6 V, TJ = 25 °C
  • On-resistance (RON): 105 mΩ typical (300 mΩ max) at VIN = 1.8 V, TJ = 25 °C
  • Quiescent current (IQ, VIN): 8 μA typical, 15 μA max at VIN = 3.6 V, TJ = 25 °C (20 μA max over -40 to 125 °C)
  • Shutdown current (ISD, VIN): 2 nA typical, 20 nA max at VIN = 3.6 V, TJ = 25 °C (800 nA max over -40 to 125 °C)
  • Short-circuit current limit (ISC): 3 A typical (VOUT ≤ VIN - 1.5 V); 500 mA typical (30 to 900 mA) when VOUT ≤ VSC
  • Turn-on time (tON): 1750 μs typical at VIN = 3.6 V (1950 μs at 5.0 V, 1500 μs at 1.8 V)
  • Internal QOD resistance (RPD, QOD): 24 Ω typical

Features:

  • Controlled slew rate to limit inrush current
  • Smart ON pin pull-down to eliminate floating inputs without steady-state power loss
  • Self-protected with output short-circuit limit and thermal shutdown
  • Configurable quick output discharge (QOD) pin

Applications:

  • Personal electronics
  • Set top box
  • HDTV
  • Multi function printer

Package:

  • SC-70 (6) (2.1 mm × 2.0 mm nominal body size, package designator DCK)

TPS22919-Q1 Features

  • 1 · Input operating voltage range (VIN): 1.6 V to 5.5 V
  • Maximum continuous current (IMAX): 1.5 A
  • On-Resistance (RON):
  • -5-V VIN: 89 m Ω (typical)
  • -3.6-V VIN: 90 m Ω (typical)
  • -1.8-V VIN: 105 m Ω (typical)
  • Output short protection (ISC): 3 A (typical)
  • Low power consumption:
  • -ON state (IQ): 8 μA (typical)
  • -OFF state (ISD): 2 nA (typical)
  • Smart ON pin pull down (RPD):
  • -ON ≥ VIH (ION): 100 nA (maximum)
  • -ON ≤ VIL (RPD): 530 k Ω (typical)
  • Slow Turn ON timing to limit inrush current (tON):
  • -5.0 V Turn ON time (tON): 1.95 ms at 3.2 mV/ μ s
  • -3.6 V Turn ON time (tON): 1.75 ms at 2.7 mV/ μ s
  • -1.8 V Turn ON time (tON): 1.5 ms at 1.8 mV/ μ s
  • Adjustable output discharge and fall time:
  • -Internal QOD resistance = 24 Ω (typical)

1

TPS22919-Q1 Applications

  • Personal electronics
  • Set top box
  • HDTV
  • Multi function printer

TPS22919-Q1 Pin Configuration

TPS22919-Q1 Electrical Characteristics

Typical values at VIN = 3.6V unless otherwise specified

PARAMETERPARAMETERTEST CONDITIONST JMINTYPMAXUNIT
Input Supply (VIN)Input Supply (VIN)Input Supply (VIN)Input Supply (VIN)Input Supply (VIN)Input Supply (VIN)Input Supply (VIN)Input Supply (VIN)Input Supply (VIN)
I Q, VINVIN Quiescent CurrentV ON ≥ V IH , VOUT = Open25°C815μA
I Q, VIN-40°C to 125°C20μA
I SD, VINVIN Shutdown CurrentV ON ≤ V IL , VOUT = GND25°C220nA
I SD, VIN-40°C to 125°C800nA
ON-Resistance (RON)ON-Resistance (RON)ON-Resistance (RON)ON-Resistance (RON)ON-Resistance (RON)ON-Resistance (RON)ON-Resistance (RON)ON-Resistance (RON)ON-Resistance (RON)
V IN = 5
V
V IN = 5
V IN = 5
25°C
-40°C to 85°C
-40°C to 105°C
-40°C to 125°C
89125
150
175
200
m Ω
m Ω
m Ω
m Ω
R ON-200 mA V IN = 3.625°C90150m Ω
R ON-200 mA V IN = 3.6-40°C to 85°C200m Ω
R ONON-State Resistance-200 mA V IN = 3.6-40°C to 105°C225m Ω
R ON-200 mA V IN = 3.6-40°C to 125°C250m Ω
R ON25°C105300m Ω
R ONV = 1.8-40°C to 85°C400m Ω
R ONIN-40°C to 105°C450m Ω
R ON-40°C to 125°C500m Ω
Output Short Protection (ISC)Output Short Protection (ISC)Output Short Protection (ISC)Output Short Protection (ISC)Output Short Protection (ISC)Output Short Protection (ISC)Output Short Protection (ISC)Output Short Protection (ISC)Output Short Protection (ISC)
I SCShort Circuit Current LimitV OUT ≤ V IN - 1.5 V-40°C to 125°C3A
I SCV OUT ≤ V SC-40°C to 125°C30500900mA
V SCOutput Short Detection ThresholdV IN - V OUT-40°C to 125°C0.30.360.46V
t SCOutput Short Reponse TimeV IN = 1.6V to 5.5V, 10m Ω short applied-40°C to 125°C2μs
TThermal ShutdownRising180°C
SDFalling145°C
Enable Pin (ON)Enable Pin (ON)Enable Pin (ON)Enable Pin (ON)Enable Pin (ON)Enable Pin (ON)Enable Pin (ON)Enable Pin (ON)Enable Pin (ON)
I ONON Pin LeakageV ON ≥ V IH-40°C to 125°C100nA
R PD, ONSmart Pull Down ResistanceV ON ≤ V IL-40°C to 125°C530k Ω
Quick-output Discharge (QOD)Quick-output Discharge (QOD)Quick-output Discharge (QOD)Quick-output Discharge (QOD)Quick-output Discharge (QOD)Quick-output Discharge (QOD)Quick-output Discharge (QOD)Quick-output Discharge (QOD)Quick-output Discharge (QOD)
R PD, QODQOD Pin Internal Discharge ResistanceV ON ≤ V IL-40°C to 125°C24Ω

TPS22919-Q1 Absolute Maximum Ratings

Over operating free-air temperature range (unless otherwise noted) (1)

MINMAXUNIT
V INMaximum Input Voltage Range-0.36V
V OUTMaximum Output Voltage Range-0.36V
V ONMaximum ON Pin Voltage Range-0.36V
V QODMaximum QOD Pin Voltage Range-0.36V
I MAXMaximum Continuous Current1.5A
I PLSMaximum Pulsed Current (2 ms, 2% Duty Cycle)2.5A
T JJunction temperatureInternally LimitedInternally Limited°C
T STGStorage temperature-65150°C
T LEADMaximum Lead Temperature (10 s soldering time)300°C

over operating free-air temperature range (unless otherwise noted)

MINTYPMAXUNIT
V INInput Voltage Range1.65.5V
V OUTOutput Voltage Range05.5V
V IHON Pin High Voltage Range15.5V
V ILON Pin Low Voltage Range00.35V
T AAmbient Temperature-40105°C

TPS22919-Q1 Thermal Information

THERMAL METRIC (1)THERMAL METRIC (1)TPS22919 DCK (SC-70) PINSUNIT
R θ JAJunction-to-ambient thermal resistance210.7°C/W
R θ JC(top)Junction-to-case (top) thermal resistance142.0°C/W
R θ JBJunction-to-board thermal resistance69.0°C/W
Ψ JTJunction-to-top characterization parameter52.7°C/W
Ψ JBJunction-to-board characterization parameter68.8°C/W

TPS22919-Q1 Typical Application

This section highlights some of the design considerations when implementing this device in various applications.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
TPS22919Texas InstrumentsSC-70-6
TPS22919DCKTexas InstrumentsSC-70 (6)
TPS22919DCKRTexas InstrumentsSC-70-6
TPS22919DCKR.ATexas InstrumentsSC-70-5
TPS22919DCKTTexas InstrumentsSC-70-6
TPS22919DCKT.ATexas InstrumentsSC-70-5

More datasheets

All Texas Instruments datasheets (2,418)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the TPS22919-Q1

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the TPS22919-Q1 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.