TPS22916CNL
Load SwitchThe TPS22916CNL is a load switch from Texas Instruments. View the full TPS22916CNL datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
TPS22916CNL shares its datasheet with TPS22916, whose page lists every part number it covers.
Official TPS22916CNL datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Load Switch
TPS22916CNL Key Specifications
| Parameter | Value |
|---|---|
| Current - Output (Max) | 2A |
| Fault Protection | Reverse Current |
| Features | Slew Rate Controlled |
| Height | 500 µm |
| Input Type | Non-Inverting |
| Length | 0 m |
| Lifecycle Status | Production (Last Updated: 1 day ago) |
| Manufacturer Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Max Operating Temperature | 85 °C |
| Min Operating Temperature | -40 °C |
| Mounting Type | Surface Mount |
| Number of Channels | 1 |
| Number of Outputs | 1 |
| Number of Pins | 4 |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Output Configuration | High Side |
| Output Type | P-Channel |
| Package / Case | 4-XFBGA, DSBGA |
| Packaging | MouseReel |
| Ratio - Input:Output | 1:1 |
| Rds On (Typ) | 200mOhm |
| RoHS | Compliant |
| Schedule B | 8542390000, 8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|85 |
| Standard Pack Qty | 3000 |
| Supplier Device Package | 4-DSBGA |
| Switch Type | Power Switch |
| Thickness | 0 m |
| Load Voltage | 5.5V |
| Supply Voltage | 1V ~ 5.5V |
| Width | 0 m |
TPS22916CNL Overview
Part: TPS22916xx (TPS22916CYFPR is the TPS22916C variant, YFP WCSP, tape and reel) — Texas Instruments
Type: Load Switch (P-channel MOSFET, ultra-low leakage)
Description: 1–5.5 V input, 2 A continuous, 60 mΩ (typ. at 5 V) load switch with 10 nA (typ.) shutdown current, true reverse current blocking, and quick output discharge in a 0.78 mm × 0.78 mm 4-pin WCSP.
Operating Conditions:
- Supply voltage (VIN): 1–5.5 V
- Operating temperature: -40 to +85 °C
- ON pin: VIH 1–5.5 V, VIL 0–0.35 V
- VOUT: 0–5.5 V
Absolute Maximum Ratings:
- Input voltage VIN: -0.3 to 6 V
- Output voltage VOUT: -0.3 to 6 V
- Enable voltage VON: -0.3 to 6 V
- Max continuous switch current: 2 A
- Max pulsed switch current (pulse < 300 μs, 2% duty cycle): 2.5 A
- Max junction temperature: 125 °C
- Storage temperature: -65 to 150 °C
- Lead temperature (10 s soldering): 300 °C
- ESD: HBM ±2000 V, CDM ±500 V
Key Specs:
- RON at 25 °C: 60 mΩ typ. (VIN = 5 V), 70 mΩ typ. (3.6 V), 100 mΩ typ. (1.8 V), 200 mΩ typ. (1 V per features list; 325 mΩ max at -40 to +85 °C)
- RON max (-40 to +85 °C): 100 mΩ at 5 V, 150 mΩ at 1.8 V
- Quiescent current IQ (enabled, VOUT open): 0.5 μA typ., 1.0 μA max
- Shutdown current ISD (disabled, VOUT = GND): 10 nA typ., 100 nA max (B/C/CN); 100 nA typ., 300 nA max (BL/CL/CNL)
- ON pin leakage: ±10 nA max; smart pulldown 750 kΩ typ. when disabled
- Reverse current blocking: activation current -500 mA typ., activation time 10 μs typ., reverse leakage -300 nA max
- Quick output discharge: 150 Ω typ. (not in CN/CNL)
- C version turn-on time (CL = 0.1 μF, RL = 10 Ω): 1400 μs at 5 V, 1700 μs at 3.6 V
- B version turn-on time: 115 μs at 5 V, 250 μs at 1.8 V, 510 μs at 1 V
- Thermal resistance θJA: 193 °C/W
Features:
- Smart ON pin pulldown that disconnects once ON ≥ VIH
- Slow-timing C version to limit inrush current; fast-timing B version to reduce wait time
- Always-on true reverse current blocking
- Quick output discharge (not on N versions)
- Active-low enable option (L versions)
- Operation down to 1 V with minimal RON increase
Applications:
- Wearables
- Smartphones
- Tablets
- Portable speakers
Package:
- WCSP (YFP), 4 pins, 0.78 mm × 0.78 mm, 0.4 mm pitch, 0.5 mm height
TPS22916CNL Features
- Input operating voltage range (VIN ): 1 V-5.5 V
- Maximum continuous current (IMAX): 2 A
- ON-resistance (RON):
- -5 VIN = 60 mΩ (typ.), 100 mΩ (85°C max.)
- -1.8 VIN = 100 mΩ (typ.), 150 mΩ (85°C max.)
- -1 VIN = 200 mΩ (typ.), 325 mΩ (85°C max.)
- Ultra-low power consumption:
- -ON state (I Q ): 0.5 μA (typ.), 1 μA (max.)
- -OFF state (I SD ): 10 nA (typ.), 100 nA (max.)
- -TPS22916BL/CL/CNL (ISD): 100 nA (typ.), 300 nA (max.)
- Smart ON pin pulldown (RPD):
- -ON ≥ VIH (ION): 10 nA (max.)
- -ON ≤ VIL (RPD): 750 kΩ (typ.)
- Slow Timing in C Version Limits Inrush Current:
- -5-V turn-on time (tON): 1400 μs at 5 mV/μs
- -1.8-V turn-on time (tON): 3000 μs at 1 mV/μs
- -1-V turn-on time (tON): 6500 μs at 0.3 mV/μs
- Fast timing in b version reduces wait time:
- -5-V turn-on time (tON): 115 μs at 57 mV/μs
- -1.8-V turn-on time (tON): 250 μs at 12 mV/μs
- -1-V turn-on time (tON): 510 μs at 3.3 mV/μs
- Always-ON true Reverse Current Blocking (RCB):
- -Activation current (IRCB): -500 mA (typ.)
- -Reverse leakage (IIN,RCB): -300 nA (max.)
- Quick Output Discharge (QOD): 150 Ω (typ.) (N version has no QOD)
- Active low enable option (L versions)
TPS22916CNL Applications
- Wearables
- Smartphones
- Tablets
- Portable speakers
TPS22916CNL Pin Configuration
Figure 5-1. YFP Package 4-Pin WSON Laser Marking View
Figure 5-2. YFP Package 4-Pin WSON Bump View
TPS22916CNL Electrical Characteristics
Unless otherwise noted, the specification in the following table applies for all variants over the entire recommended power supply voltage range of 1 V to 5.5 V unless noted otherwise. Typical Values are at 25°C.
| PARAMETER | PARAMETER | TEST CONDITIONS | T J | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|---|
| INPUT SUPPLY (VIN) | INPUT SUPPLY (VIN) | INPUT SUPPLY (VIN) | INPUT SUPPLY (VIN) | INPUT SUPPLY (VIN) | INPUT SUPPLY (VIN) | INPUT SUPPLY (VIN) | INPUT SUPPLY (VIN) |
| I Q,VIN | V IN Quiescent current | Enabled, V OUT = Open | -40°C to | +85°C | 0.5 | 1.0 | μA |
| I SD,VIN | V IN Shutdown current | Disabled, V OUT = GND (TPS22916B/C/CN) | to | -40°C +85°C | 10 | 100 | nA |
| Disabled, V OUT = GND (TPS22916BL/CL/ CNL) | -40°C | to +85°C | 100 | 300 | nA | ||
| ON-RESISTANCE (R ON ) | ON-RESISTANCE (R ON ) | ON-RESISTANCE (R ON ) | ON-RESISTANCE (R ON ) | ON-RESISTANCE (R ON ) | ON-RESISTANCE (R ON ) | ON-RESISTANCE (R ON ) | ON-RESISTANCE (R ON ) |
| V IN V IN | 25°C | 60 | 80 | ||||
| = 5 V | to +85°C to +85°C | -40°C -40°C to +105°C | 100 120 | ||||
| +85°C | 25°C | 70 | 90 | ||||
| = 3.6 V | +85°C +85°C | -40°C to -40°C to +105°C | 120 140 | ||||
| -40°C to +85°C | 25°C | 100 | 125 | ||||
| R ON | ON-Resistance | I OUT = 200 mA V IN = 1.8 V | 150 | mΩ | |||
| I OUT = 200 mA V IN = 1.8 V V IN = 1.2 V | -40°C to +105°C 25°C -40°C to +85°C -40°C to +105°C 25°C | 150 200 | 175 200 250 300 275 | mΩ | |||
| V IN = 1 V | to to | -40°C +85°C -40°C to +105°C | 325 375 | ||||
| ENABLE PIN (ON) | ENABLE PIN (ON) | ENABLE PIN (ON) | ENABLE PIN (ON) | ENABLE PIN (ON) | ENABLE PIN (ON) | ENABLE PIN (ON) | ENABLE PIN (ON) |
| I ON | ON Pin leakage | Enabled | -40°C to +85°C | -10 | 10 | nA | |
| R PD | Smart Pull Down Resistance | Disabled | -40°C to | +85°C | 750 | kΩ | |
| REVERSE CURRENT BLOCKING (RCB) | REVERSE CURRENT BLOCKING (RCB) | REVERSE CURRENT BLOCKING (RCB) | REVERSE CURRENT BLOCKING (RCB) | REVERSE CURRENT BLOCKING (RCB) | REVERSE CURRENT BLOCKING (RCB) | REVERSE CURRENT BLOCKING (RCB) | REVERSE CURRENT BLOCKING (RCB) |
| I RCB | RCB Activation Current | Enabled, V OUT > V IN | -40°C to +85°C | -500 | mA | ||
| t RCB | RCB Activation time | Enabled, V OUT > V IN + 200mV | -40°C to +85°C | 10 | μs | ||
| V RCB | RCB Release Voltage | Enabled, V OUT > V IN | -40°C to +85°C | 25 | mV | ||
| I IN,RCB | VIN Reverse Leakage Current | 0 V ≤ V IN + V RCB ≤ V OUT ≤ 5.5 V | -40°C to +85°C | -300 | nA | ||
| QUICK OUTPUT DISCHARGE (QOD) | QUICK OUTPUT DISCHARGE (QOD) | QUICK OUTPUT DISCHARGE (QOD) | QUICK OUTPUT DISCHARGE (QOD) | QUICK OUTPUT DISCHARGE (QOD) | QUICK OUTPUT DISCHARGE (QOD) | QUICK OUTPUT DISCHARGE (QOD) | QUICK OUTPUT DISCHARGE (QOD) |
| QOD (1) | Output discharge resistance | Disabled (Not in TPS22916CN/CNL) | -40°C to +85°C | 150 | Ω |
TPS22916CNL Absolute Maximum Ratings
Over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| V IN | Input voltage | -0.3 | 6 | V |
| V OUT | Output voltage | -0.3 | 6 | V |
| V ON | Enable voltage | -0.3 | 6 | V |
| I MAX | Maximum continuous switch current | 2 | A | |
| I PLS | Maximum pulsed switch current, pulse < 300-μs, 2% duty cycle | 2.5 | A | |
| T J,MAX | Maximum junction temperature | 125 | °C | |
| T STG | Storage temperature | -65 | 150 | °C |
| T LEAD | Maximum Lead temperature (10-s soldering time) | 300 | °C |
TPS22916CNL Recommended Operating Conditions
Over operating free-air temperature range (unless otherwise noted)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| V IN | Input voltage | 1 | 5.5 | V |
| V OUT | Output voltage | 0 | 5.5 | V |
| V IH | High-level input voltage, ON | 1 | 5.5 | V |
| V IL | Low-level input voltage, ON | 0 | 0.35 | V |
| T A | Operating free-air temperature | -40 | 85 | °C |
TPS22916CNL Thermal Information
| Thermal Parameters (1) | Thermal Parameters (1) | TPS22916xx YFP (WCSP) 4 PINS | UNIT |
|---|---|---|---|
| θ JA | Junction-to-ambient thermal resistance | 193 | °C/W |
| θ JCtop | Junction-to-case (top) thermal resistance | 2.3 | °C/W |
| θ JB | Junction-to-board thermal resistance | 36 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 12 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 36 | °C/W |
TPS22916CNL Typical Application
This section highlights some of the design considerations when implementing this device in various applications. A PSPICE model for this device is also available in the product page of this device.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TPS22916 | Texas Instruments | — |
| TPS22916B | Texas Instruments | — |
| TPS22916B/C/CN | Texas Instruments | — |
| TPS22916BL | Texas Instruments | — |
| TPS22916BL/CL | Texas Instruments | — |
| TPS22916BYFPR | Texas Instruments | DSBGA-4(0.7x0.7) |
| TPS22916BYFPR.A | Texas Instruments | — |
| TPS22916BYFPT | Texas Instruments | — |
| TPS22916BYFPT.A | Texas Instruments | — |
| TPS22916C | Texas Instruments | — |
| TPS22916CL | Texas Instruments | — |
| TPS22916CN | Texas Instruments | — |
| TPS22916CN/CNL | Texas Instruments | — |
| TPS22916CYFPR | Texas Instruments | 4-XFBGA, DSBGA |
| TPS22916CYFPR.A | Texas Instruments | — |
| TPS22916CYFPT | Texas Instruments | — |
| TPS22916CYFPT.A | Texas Instruments | — |
More datasheets
Ask your AI agent about the TPS22916CNL
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TPS22916CNL run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.