Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

TPS22916BL

Load Switch

The TPS22916BL is a load switch from Texas Instruments. View the full TPS22916BL datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

TPS22916BL shares its datasheet with TPS22916, whose page lists every part number it covers.

Official TPS22916BL datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Load Switch

TPS22916BL Key Specifications

ParameterValue
Current - Output (Max)2A
Fault ProtectionReverse Current
FeaturesSlew Rate Controlled
Height500 µm
Input TypeNon-Inverting
Length0 m
Lifecycle StatusProduction (Last Updated: 1 day ago)
Manufacturer Lifecycle StatusACTIVE (Last Updated: 1 day ago)
Max Operating Temperature85 °C
Min Operating Temperature-40 °C
Mounting TypeSurface Mount
Number of Channels1
Number of Outputs1
Number of Pins4
Operating Temperature-40°C ~ 85°C (TA)
Output ConfigurationHigh Side
Output TypeP-Channel
Package / Case4-XFBGA, DSBGA
PackagingMouseReel
Ratio - Input:Output1:1
Rds On (Typ)200mOhm
RoHSCompliant
Schedule B8542390000, 8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|8542390000|85
Standard Pack Qty3000
Supplier Device Package4-DSBGA
Switch TypePower Switch
Thickness0 m
Load Voltage5.5V
Supply Voltage1V ~ 5.5V
Width0 m

TPS22916BL Overview

Part: TPS22916xx (TPS22916CYFPR is the TPS22916C variant, YFP WCSP, tape and reel) — Texas Instruments

Type: Load Switch (P-channel MOSFET, ultra-low leakage)

Description: 1–5.5 V input, 2 A continuous, 60 mΩ (typ. at 5 V) load switch with 10 nA (typ.) shutdown current, true reverse current blocking, and quick output discharge in a 0.78 mm × 0.78 mm 4-pin WCSP.

Operating Conditions:

  • Supply voltage (VIN): 1–5.5 V
  • Operating temperature: -40 to +85 °C
  • ON pin: VIH 1–5.5 V, VIL 0–0.35 V
  • VOUT: 0–5.5 V

Absolute Maximum Ratings:

  • Input voltage VIN: -0.3 to 6 V
  • Output voltage VOUT: -0.3 to 6 V
  • Enable voltage VON: -0.3 to 6 V
  • Max continuous switch current: 2 A
  • Max pulsed switch current (pulse < 300 μs, 2% duty cycle): 2.5 A
  • Max junction temperature: 125 °C
  • Storage temperature: -65 to 150 °C
  • Lead temperature (10 s soldering): 300 °C
  • ESD: HBM ±2000 V, CDM ±500 V

Key Specs:

  • RON at 25 °C: 60 mΩ typ. (VIN = 5 V), 70 mΩ typ. (3.6 V), 100 mΩ typ. (1.8 V), 200 mΩ typ. (1 V per features list; 325 mΩ max at -40 to +85 °C)
  • RON max (-40 to +85 °C): 100 mΩ at 5 V, 150 mΩ at 1.8 V
  • Quiescent current IQ (enabled, VOUT open): 0.5 μA typ., 1.0 μA max
  • Shutdown current ISD (disabled, VOUT = GND): 10 nA typ., 100 nA max (B/C/CN); 100 nA typ., 300 nA max (BL/CL/CNL)
  • ON pin leakage: ±10 nA max; smart pulldown 750 kΩ typ. when disabled
  • Reverse current blocking: activation current -500 mA typ., activation time 10 μs typ., reverse leakage -300 nA max
  • Quick output discharge: 150 Ω typ. (not in CN/CNL)
  • C version turn-on time (CL = 0.1 μF, RL = 10 Ω): 1400 μs at 5 V, 1700 μs at 3.6 V
  • B version turn-on time: 115 μs at 5 V, 250 μs at 1.8 V, 510 μs at 1 V
  • Thermal resistance θJA: 193 °C/W

Features:

  • Smart ON pin pulldown that disconnects once ON ≥ VIH
  • Slow-timing C version to limit inrush current; fast-timing B version to reduce wait time
  • Always-on true reverse current blocking
  • Quick output discharge (not on N versions)
  • Active-low enable option (L versions)
  • Operation down to 1 V with minimal RON increase

Applications:

  • Wearables
  • Smartphones
  • Tablets
  • Portable speakers

Package:

  • WCSP (YFP), 4 pins, 0.78 mm × 0.78 mm, 0.4 mm pitch, 0.5 mm height

TPS22916BL Features

  • Input operating voltage range (VIN ): 1 V-5.5 V
  • Maximum continuous current (IMAX): 2 A
  • ON-resistance (RON):
  • -5 VIN = 60 mΩ (typ.), 100 mΩ (85°C max.)
  • -1.8 VIN = 100 mΩ (typ.), 150 mΩ (85°C max.)
  • -1 VIN = 200 mΩ (typ.), 325 mΩ (85°C max.)
  • Ultra-low power consumption:
  • -ON state (I Q ): 0.5 μA (typ.), 1 μA (max.)
  • -OFF state (I SD ): 10 nA (typ.), 100 nA (max.)
  • -TPS22916BL/CL/CNL (ISD): 100 nA (typ.), 300 nA (max.)
  • Smart ON pin pulldown (RPD):
  • -ON ≥ VIH (ION): 10 nA (max.)
  • -ON ≤ VIL (RPD): 750 kΩ (typ.)
  • Slow Timing in C Version Limits Inrush Current:
  • -5-V turn-on time (tON): 1400 μs at 5 mV/μs
  • -1.8-V turn-on time (tON): 3000 μs at 1 mV/μs
  • -1-V turn-on time (tON): 6500 μs at 0.3 mV/μs
  • Fast timing in b version reduces wait time:
  • -5-V turn-on time (tON): 115 μs at 57 mV/μs
  • -1.8-V turn-on time (tON): 250 μs at 12 mV/μs
  • -1-V turn-on time (tON): 510 μs at 3.3 mV/μs
  • Always-ON true Reverse Current Blocking (RCB):
  • -Activation current (IRCB): -500 mA (typ.)
  • -Reverse leakage (IIN,RCB): -300 nA (max.)
  • Quick Output Discharge (QOD): 150 Ω (typ.) (N version has no QOD)
  • Active low enable option (L versions)

TPS22916BL Applications

  • Wearables
  • Smartphones
  • Tablets
  • Portable speakers

TPS22916BL Pin Configuration

Figure 5-1. YFP Package 4-Pin WSON Laser Marking View

Figure 5-2. YFP Package 4-Pin WSON Bump View

TPS22916BL Electrical Characteristics

Unless otherwise noted, the specification in the following table applies for all variants over the entire recommended power supply voltage range of 1 V to 5.5 V unless noted otherwise. Typical Values are at 25°C.

PARAMETERPARAMETERTEST CONDITIONST JMINTYPMAXUNIT
INPUT SUPPLY (VIN)INPUT SUPPLY (VIN)INPUT SUPPLY (VIN)INPUT SUPPLY (VIN)INPUT SUPPLY (VIN)INPUT SUPPLY (VIN)INPUT SUPPLY (VIN)INPUT SUPPLY (VIN)
I Q,VINV IN Quiescent currentEnabled, V OUT = Open-40°C to+85°C0.51.0μA
I SD,VINV IN Shutdown currentDisabled, V OUT = GND (TPS22916B/C/CN)to-40°C +85°C10100nA
Disabled, V OUT = GND (TPS22916BL/CL/ CNL)-40°Cto +85°C100300nA
ON-RESISTANCE (R ON )ON-RESISTANCE (R ON )ON-RESISTANCE (R ON )ON-RESISTANCE (R ON )ON-RESISTANCE (R ON )ON-RESISTANCE (R ON )ON-RESISTANCE (R ON )ON-RESISTANCE (R ON )
V IN V IN25°C6080
= 5 Vto +85°C
to +85°C
-40°C
-40°C to +105°C
100
120
+85°C25°C7090
= 3.6 V+85°C
+85°C
-40°C to
-40°C to +105°C
120
140
-40°C to +85°C25°C100125
R ONON-ResistanceI OUT = 200 mA V IN = 1.8 V150mΩ
I OUT = 200 mA V IN = 1.8 V
V IN = 1.2 V
-40°C to +105°C
25°C
-40°C to +85°C
-40°C to +105°C
25°C
150
200
175
200
250
300
275
mΩ
V IN = 1 Vto
to
-40°C +85°C
-40°C to +105°C
325
375
ENABLE PIN (ON)ENABLE PIN (ON)ENABLE PIN (ON)ENABLE PIN (ON)ENABLE PIN (ON)ENABLE PIN (ON)ENABLE PIN (ON)ENABLE PIN (ON)
I ONON Pin leakageEnabled-40°C to +85°C-1010nA
R PDSmart Pull Down ResistanceDisabled-40°C to+85°C750kΩ
REVERSE CURRENT BLOCKING (RCB)REVERSE CURRENT BLOCKING (RCB)REVERSE CURRENT BLOCKING (RCB)REVERSE CURRENT BLOCKING (RCB)REVERSE CURRENT BLOCKING (RCB)REVERSE CURRENT BLOCKING (RCB)REVERSE CURRENT BLOCKING (RCB)REVERSE CURRENT BLOCKING (RCB)
I RCBRCB Activation CurrentEnabled, V OUT > V IN-40°C to +85°C-500mA
t RCBRCB Activation timeEnabled, V OUT > V IN + 200mV-40°C to +85°C10μs
V RCBRCB Release VoltageEnabled, V OUT > V IN-40°C to +85°C25mV
I IN,RCBVIN Reverse Leakage Current0 V ≤ V IN + V RCB ≤ V OUT ≤ 5.5 V-40°C to +85°C-300nA
QUICK OUTPUT DISCHARGE (QOD)QUICK OUTPUT DISCHARGE (QOD)QUICK OUTPUT DISCHARGE (QOD)QUICK OUTPUT DISCHARGE (QOD)QUICK OUTPUT DISCHARGE (QOD)QUICK OUTPUT DISCHARGE (QOD)QUICK OUTPUT DISCHARGE (QOD)QUICK OUTPUT DISCHARGE (QOD)
QOD (1)Output discharge resistanceDisabled (Not in TPS22916CN/CNL)-40°C to +85°C150Ω

TPS22916BL Absolute Maximum Ratings

Over operating free-air temperature range (unless otherwise noted) (1)

MINMAXUNIT
V INInput voltage-0.36V
V OUTOutput voltage-0.36V
V ONEnable voltage-0.36V
I MAXMaximum continuous switch current2A
I PLSMaximum pulsed switch current, pulse < 300-μs, 2% duty cycle2.5A
T J,MAXMaximum junction temperature125°C
T STGStorage temperature-65150°C
T LEADMaximum Lead temperature (10-s soldering time)300°C

Over operating free-air temperature range (unless otherwise noted)

MINMAXUNIT
V INInput voltage15.5V
V OUTOutput voltage05.5V
V IHHigh-level input voltage, ON15.5V
V ILLow-level input voltage, ON00.35V
T AOperating free-air temperature-4085°C

TPS22916BL Thermal Information

Thermal Parameters (1)Thermal Parameters (1)TPS22916xx YFP (WCSP) 4 PINSUNIT
θ JAJunction-to-ambient thermal resistance193°C/W
θ JCtopJunction-to-case (top) thermal resistance2.3°C/W
θ JBJunction-to-board thermal resistance36°C/W
ψ JTJunction-to-top characterization parameter12°C/W
ψ JBJunction-to-board characterization parameter36°C/W

TPS22916BL Typical Application

This section highlights some of the design considerations when implementing this device in various applications. A PSPICE model for this device is also available in the product page of this device.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
TPS22916Texas Instruments—
TPS22916BTexas Instruments—
TPS22916B/C/CNTexas Instruments—
TPS22916BL/CLTexas Instruments—
TPS22916BYFPRTexas InstrumentsDSBGA-4(0.7x0.7)
TPS22916BYFPR.ATexas Instruments—
TPS22916BYFPTTexas Instruments—
TPS22916BYFPT.ATexas Instruments—
TPS22916CTexas Instruments—
TPS22916CLTexas Instruments—
TPS22916CNTexas Instruments—
TPS22916CN/CNLTexas Instruments—
TPS22916CNLTexas Instruments—
TPS22916CYFPRTexas Instruments4-XFBGA, DSBGA
TPS22916CYFPR.ATexas Instruments—
TPS22916CYFPTTexas Instruments—
TPS22916CYFPT.ATexas Instruments—

More datasheets

All Texas Instruments datasheets (2,670)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the TPS22916BL

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the TPS22916BL run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.