TMP116NAIDRVR
The TMP116NAIDRVR is an electronic component from Texas Instruments. View the full TMP116NAIDRVR datasheet below including key specifications, pinout, electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Category
Temperature and Humidity Sensors
Package
6-WDFN Exposed Pad
Lifecycle
Production (Last Updated: 1 day ago)
Key Specifications
| Parameter | Value |
|---|---|
| Accuracy (Sensor) | ±0.4°C |
| Ambient Temperature Range High | 150 °C |
| Features | One-Shot, Shutdown Mode |
| Features | One-Shot, Shutdown Mode |
| Height | 800 µm |
| Interface | 2-Wire, I2C, SMBus |
| Length | 2 mm |
| Lifecycle Status | Production (Last Updated: 1 day ago) |
| Manufacturer Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Max Junction Temperature (Tj) | 150 °C |
| Max Operating Temperature | 125 °C |
| Max Supply Voltage | 5.5 V |
| Min Operating Temperature | -55 °C |
| Min Supply Voltage | 1.9 V |
| Mounting Type | Surface Mount |
| Number of Pins | 6 |
| Operating Temperature | -55°C ~ 125°C |
| Output Type | 2-Wire Serial, I2C/SMBUS |
| Package / Case | 6-WDFN Exposed Pad |
| Resolution | 16 b |
| RoHS | Compliant |
| Schedule B | 8542390000, 8542390000|8542390000|8542390000|8542390000|8542390000 |
| Sensing Temperature Range | -55°C ~ 125°C |
| Sensing Temperature - Remote | -55°C ~ 125°C |
| Sensing Temperature - Remote | -55°C ~ 125°C |
| Sensor Type | Digital, Local |
| Supplier Device Package | 6-WSON (2x2) |
| Supplier Device Package | 6-WSON (2x2) |
| Test Condition | -10°C ~ 85°C (-40°C ~ 125°C) |
| Test Condition | -10°C ~ 85°C (-40°C ~ 125°C) |
| Thickness | 750 µm |
| Supply Voltage | 1.9V ~ 5.5V |
| Width | 2 mm |
Overview
| BIT | FIELD | TYPE | RESET | DESCRIPTION |
|---|---|---|---|---|
| 15:0 | T[15:0] | R | 8000h | 16-bit, read-only register that stores the most recent temperature conversion results. |
Pin Configuration
TMP116NAIDRVR Pinout
Package: 6-WDFN (6-Pin WSON with Exposed Pad)
| Pin Number | Pin Name | Type | Description |
|---|---|---|---|
| 1 | SCL | I/O | Serial Clock (I²C) |
| 2 | GND | P | Ground |
| 3 | ALERT | O | Alert Output |
| 4 | ADD0 | I | Address Select |
| 5 | V+ | P | Supply Voltage |
| 6 | SDA | I/O | Serial Data (I²C) |
| — | Thermal Pad | P | Exposed thermal pad (connected to GND) |
Notes
- This is a 6-pin WSON package with an exposed thermal pad on the bottom.
- SCL and SDA are open-drain I²C interface pins; external pull-up resistors are required.
- ALERT is an open-drain output pin.
- ADD0 is used to select one of four possible I²C slave addresses.
- The exposed thermal pad should be soldered to ground for optimal thermal performance.
Electrical Characteristics
minimum and maximum specifications are over -55°C to +125°C and V+ = 1.9 V to 5.5 V (unless otherwise noted); typical specifications are at TA = 25°C and V+ = 3.3 V
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| TEMPERATURE-TO-DIGITAL CONVERTER | TEMPERATURE-TO-DIGITAL CONVERTER | TEMPERATURE-TO-DIGITAL CONVERTER | TEMPERATURE-TO-DIGITAL CONVERTER | TEMPERATURE-TO-DIGITAL CONVERTER | TEMPERATURE-TO-DIGITAL CONVERTER | TEMPERATURE-TO-DIGITAL CONVERTER |
| Temperature accuracy (1) TMP116 | -10°C to +85°C, V+ = 3.3 V -40°C to +105°C, V+ = 3.0 V to +105°C to +125°C, V+ = 3.0 V to | -0.2 | ±0.1 | 0.2 | °C | |
| 3.6 V | -0.25 | ±0.2 | 0.25 | °C | ||
| 3.6 V | -0.3 | ±0.25 | 0.3 | °C | ||
| -40°C to +125°C, V+ = 1.9 V to 5.5 V (2) | -0.4 | ±0.3 | 0.4 | °C | ||
| TMP116N | -25°C to +85°C, V+ = 3.3 V | -0.3 | ±0.2 | 0.3 | °C | |
| -40°C to +125°C, V+ = 3.0 V to 3.6 V | -0.4 | ±0.3 | 0.4 | °C | ||
| -40°C to +125°C V+ = 1.9 V to 5.5 V (2) | -0.5 | ±0.4 | 0.5 | °C | ||
| DC power-supply sensitivity | DC power-supply sensitivity | One-shot mode, 8 averages, T A = 25°C | 0 | 20 | 55 | m°C/V |
| Temperature resolution (LSB) | Temperature resolution (LSB) | 7.8125 | m°C | |||
| Repeatability (3) | Repeatability (3) | V+ = 3.3 V, 8 averages, 1-Hz sampling | ±1 | LSB | ||
| Long-term stability and drift | Long-term stability and drift | 300 hours at 150°C (4) | ±0.02 | °C | ||
| Temperature cycling and hysteresis (1)(5) | Temperature cycling and hysteresis (1)(5) | ±1 | LSB | |||
| DIGITAL INPUT/OUTPUT | DIGITAL INPUT/OUTPUT Input capacitance | DIGITAL INPUT/OUTPUT | DIGITAL INPUT/OUTPUT | DIGITAL INPUT/OUTPUT 3 | DIGITAL INPUT/OUTPUT | DIGITAL INPUT/OUTPUT pF |
| V IH | Input logic high level | 0.7 (V+) | V | |||
| V IL | Input logic low level | 0.3 (V+) | V | |||
| I IN | Input current | -0.2 | 0.2 | μA | ||
| V OL S | SDA output logic low level | I OL = -3 mA | 0 | 0.4 | V | |
| V OL A | ALERT output logic low level | I OL = -3 mA | 0 | 0.4 | V | |
| POWER SUPPLY | POWER SUPPLY | POWER SUPPLY | POWER SUPPLY | POWER SUPPLY | POWER SUPPLY | POWER SUPPLY |
| I Q | Quiescent current | Active conversion, serial bus inactive | 135 | 220 | μA | |
| I Q | 1-Hz conversion cycle, averaging mode off, serial bus inactive, 25°C | 3.5 | 4.5 | μA | ||
| I Q | 1-Hz conversion cycle, 8 averages mode, serial bus inactive, 25°C | 16 | 22 | μA | ||
| I Q | 1-Hz conversion cycle, averaging mode off, serial bus active, SCL frequency = 400 kHz | 21 | μA | |||
| I SB | Standby current (6) | Serial bus inactive, SCL and SDA = V+, 25°C | 1.25 | 2.1 | μA | |
| Serial bus inactive, SCL and SDA = V+, 25°C | 0.25 | 0.5 | μA | |||
| I SD | Shutdown current | Serial bus inactive, SCL and SDA = V+, 125°C | 8.5 | |||
| I SD | Serial bus active, SCL frequency = 400 kHz | 17 | ||||
| I EE | EEPROM write quiescent current | ADC conversion off; serial bus inactive | 240 | μA | ||
| V POR | Power-on-reset threshold voltage | V+ rising | 1.6 | V | ||
| Brownout detect | V+ falling | 1.1 | V | |||
| Reset time | Time required by device to reset | 1.5 | ms | |||
| Active conversion time | 1 conversion | 13.5 | 15.5 | 17 | ms |
Absolute Maximum Ratings
| MIN | MAX | UNIT | |
|---|---|---|---|
| Supply voltage, V+ | -0.3 | 6 | V |
| Voltage at SCL, SDA, ALERT, and ADD0 | -0.3 | 6 | V |
| Operating junction temperature, T J | -55 | 150 | °C |
| Storage temperature, T stg | -65 | 150 | °C |
Recommended Operating Conditions
| MIN | NOM | MAX | UNIT | ||
|---|---|---|---|---|---|
| V+ | Supply voltage | 1.9 | 3.3 | 5.5 | V |
| T A | Operating free-air temperature | -55 | 150 | °C |
Thermal Information
| THERMAL METRIC | (1) | TMP116 DRV (WSON) 6 PINS | UNIT |
|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance | 68.7 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance | 70.3 | °C/W |
| R θ JC(bot) | Junction-to-case (bottom) thermal resistance | 9.5 | °C/W |
| R θ JB | Junction-to-board thermal resistance | 38.3 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 1.7 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 38.6 | °C/W |
| M T | Thermal Mass | 5.1 | mJ/°C |
Typical Application
The TMP116 is used to measure the temperature of the board location where the device is mounted. The programmable address options allow up to four locations on the board to be monitored on a single serial bus.
Related Variants
The following components are covered by the same datasheet.
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free