TLV75533PDYDR.A
TLV755P 500mA, Low-IQ, Small-Size, Low-Dropout Regulator
Manufacturer
Texas Instruments
Category
Integrated Circuits (ICs)
Overview
Part: TLV755P from Texas Instruments
Type: Low-Dropout Regulator
Key Specs:
- Input voltage range: 1.45V to 5.5V
- Low IQ: 25μA (typical)
- Low dropout: 238mV (maximum) at 500mA (3.3VOUT)
- Output accuracy: 1% (maximum at 85°C)
- Output current: 500mA
- High PSRR: 46dB at 100kHz
Features:
- SOT-23-5 package with 60.3°C/W RθJA available
- Built-in soft-start with monotonic VOUT rise
- Foldback current limit
- Active output discharge
- Stable with a 1μF ceramic output capacitor
- Fixed output voltages ranging from 0.6V to 5V
- Enable functionality
- Integrated thermal shutdown
- Integrated current limit
- Integrated undervoltage lockout (UVLO)
- Thermally enhanced SOT23-5 (DYD) package with thermal pad
Applications:
- Set-top boxes, TV, and gaming consoles
- Portable and battery-powered equipment
- Desktops, notebooks, and ultrabooks
- Tablets and remote controls
- White goods and appliances
- Grid infrastructure and protection relays
- Camera modules and image sensors
Package:
- 2.9mm × 2.8mm SOT-23-5 (DBV)
- 2.9mm × 2.8mm SOT-23-5 (DYD) with thermal pad
- 1mm × 1mm X2SON-4 (DQN)
- 2mm × 2mm WSON-6 (DRV)
Features
- SOT-23-5 package with 60.3°C/W RθJA available
- Input voltage range: 1.45V to 5.5V
- Low IQ: 25μA (typical)
- Low dropout:
- 238mV (maximum) at 500mA (3.3VOUT)
- Output accuracy: 1% (maximum at 85°C)
- Built-in soft-start with monotonic VOUT rise
- Foldback current limit
- Active output discharge
- High PSRR: 46dB at 100kHz
- Stable with a 1μF ceramic output capacitor
- Packages:
- 2.9mm × 2.8mm SOT-23-5 (DBV)
- 2.9mm × 2.8mm SOT-23-5 (DYD) with thermal pad
- 1mm × 1mm X2SON-4 (DQN)
- 2mm × 2mm WSON-6 (DRV)
Applications
- Set-top boxes, TV, and gaming consoles
- Portable and battery-powered equipment
- Desktops, notebooks, and ultrabooks
- Tablets and remote controls
- White goods and appliances
- Grid infrastructure and protection relays
- Camera modules and image sensors
Typical Application
Start-Up Waveform
Pin Configuration
Figure 4-1. DQN Package, 4-Pin X2SON (Top View)
Figure 4-2. DBV Package, 5-Pin SOT-23 (Top View)
NC = no internal connection.
Electrical Characteristics
at operating temperature range (TJ =–40°C to 125°C), VIN=VOUT(NOM) + 0.5V or 2.0V (whichever is greater), IOUT = 1mA, VEN = VIN, and CIN = COUT = 1μF (unless otherwise noted); all typical values at TJ = 25°C
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|
| VIN | Input voltage | 1.45 | 5.5 | ||
| VOUT | Output voltage | 0.6 | 5.0 | ||
| Output accuracy | -40°C ≤ TJ ≤ +85°C, DBV and DRV package | -1 | 1 | ||
| Output accuracy | VOUT ≥ 1.0V, DQN package | -1.2 | 1.2 | ||
| Output accuracy | -40°C ≤ TJ ≤ +85°C; 0.6V ≤ VOUT < 1.0V | -10 | 10 | ||
| Output accuracy | VOUT ≥ 1V | -1.5 | 1.5 | ||
| Output accuracy | 0.6V ≤ VOUT < 1V | -15 | 15 | ||
| (ΔVOUT)ΔVIN | Line regulation | VOUT + 0.5V ≤ VIN ≤ 5.5V, VOUT > 1.5V | 2 | ||
| ΔVOUT/ΔIOUT | Load regulation | DQN package | 0.036 | ||
| ΔVOUT/ΔIOUT | Load regulation | 0.1mA ≤ IOUT ≤ 500mA | DBV and DYD packages | 0.060 | |
| ΔVOUT/ΔIOUT | Load regulation | DRV package | 0.044 | ||
| IGND | Ground current | TJ = 25°C, IOUT = 0mA | 14 | 25 | 31 |
| Ground current | -40°C ≤ TJ ≤ +85°C, IOUT = 0mA | 33 | |||
| Ground current | -40°C ≤ TJ ≤ +125°C, IOUT = 0mA | 40 | |||
| ISHDN | Shutdown current | VEN ≤ 0.4V, 1.4V ≤ VIN ≤ 5.5V, -40°C ≤ TJ ≤ +125°C | 0.1 | 1 | |
| ICL | Output current limit | VIN = VOUT+ VDD(MAX) + 0.25V | VOUT = VOUT - 0.2V, VOUT ≤ 1.5V | 560 | 720 |
| ICL | Output current limit | VOUT = 0.9 x VOUT, 1.5V < VOUT ≤ 4.5V | 560 | 720 | |
| ISC | Short-circuit current limit | VOUT = 0V | 355 |
Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)
| MIN | MAX | UNIT | |
|---|---|---|---|
| Supply voltage, VIN | -0.3 | 6.0 | V |
| Enable voltage, VEN | -0.3 | 6.0 | V |
| Output voltage, VOUT | -0.3 | VIN + 0.3[2] | V |
| Operating junction temperature TJ | -40 | 150 | °C |
| Storage temperature, Tstg | -65 | 150 | °C |
(1) Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions. If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.
(2) The absolute maximum rating is VIN + 0.3 V or 6.0 V, whichever is smaller.
Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
| MIN | NOM | MAX | UNIT | ||
|---|---|---|---|---|---|
| V_IN | Input voltage | 1.45 | 5.5 | V | |
| V_OUT | Output voltage | 0.6 | 5.0 | V | |
| V_EN | Enable voltage | 0 | 5.5 | V | |
| I_OUT | Output current | 0 | 500 | mA | |
| C_IN | Input capacitor | 1 | μF | ||
| C_OUT | Output capacitor | 1 | 200 | μF | |
| f_EN | Enable toggle frequency | 10 | kHz | ||
| T_J | Junction temperature | -40 | 125 | °C |
Thermal Information
| Pin No. | Pin Name | Function |
|---|---|---|
| 1 | VCC | Power supply pin. |
| 2 | IOUT | Output current pin. |
| 3 | GND | Ground pin. |
| 4 | VSET | Input pin for setting the output current. |
| 5 | EN | Enable pin. High: Enable, Low: Disable |
| NAME | DQN | DBV | DYD | DRV | TYPE(2) | DESCRIPTION |
|---|---|---|---|---|---|---|
| EN | 3 | 3 | 3 | 4 | I | Enable pin. Drive EN greater than VHI to turn on the regulator. Drive EN less than VLO to place the low-dropout regulator (LDO) into shutdown mode. |
| GND | 2 | 2 | 2 | 3 | — | Ground pin. |
| IN | 4 | 1 | 1 | 6 | I | Input pin. A capacitor with a value of 1μF or larger is required from this pin to ground.(1) See the Input and Output Capacitor Selection section for more information. |
| NC | — | 4 | 4 | 2, 5 | — | No internal connection. |
| OUT | 1 | 5 | 5 | 1 | O | Regulated output voltage pin. A capacitor with a value of 1μF or larger is required from this pin to ground.(1) See the Input and Output Capacitor Selection section for more information. |
| Thermal pad | Pad | — | Pad | Pad | — | Connect the thermal pad to a large-area ground plane. The thermal pad is internally connected to GND. |
(1) Make sure the nominal input and output capacitance is greater than 0.47μF. Throughout this document the nominal derating on these capacitors is 50%. Make sure the effective capacitance at the pin is greater than 0.47μF.
(2) I = Input; O = Output
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| TLV75533PDBVR | Texas Instruments | SC-74A, SOT-753 |
| TLV75533PDBVR.A | Texas Instruments | — |
| TLV75533PDQNR | Texas Instruments | |
| TLV75533PDQNR.A | Texas Instruments | — |
| TLV75533PDQNT | Texas Instruments | |
| TLV75533PDQNT.A | Texas Instruments | — |
| TLV75533PDRVR | Texas Instruments | — |
| TLV75533PDRVR.A | Texas Instruments | — |
| TLV75533PDYDR | Texas Instruments | — |
| TLV755P | Texas Instruments | — |
Get structured datasheet data via API
Get started free