Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

TLV333IDBVR

Zero-Drift CMOS Operational Amplifier

The TLV333IDBVR is a zero-drift cmos operational amplifier from Texas Instruments. View the full TLV333IDBVR datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

TLV333IDBVR shares its datasheet with TLV333, whose page lists every part number it covers.

Official TLV333IDBVR datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Operational Amplifiers

Package

SOT-23-5

TLV333IDBVR Key Specifications

ParameterValue
PackagingMouseReel
Standard Pack Qty3000
Input offset voltage2 μV typ, 15 μV max (VS = 5 V, TA = 25 °C)
Offset drift0.02 μV/°C typ (-40 to +125 °C)
Quiescent current17 μA typ, 28 μA max per amplifier (IO = 0 mA, -40 to +125 °C)
Gain-bandwidth product350 kHz (CL = 100 pF)
Slew rate0.16 V/μs (G = 1)
Input voltage noise1.1 μVPP (0.1–10 Hz); 55 nV/√Hz at 1 kHz
Input bias current±70 pA typ (±150 pA typ over -40 to +125 °C)
CMRR102 dB min, 115 dB typ; open-loop gain: 102 dB min, 130 dB typ
PSRR1 μV/V typ, 8 μV/V max
Output swing from rail30 mV typ, 70 mV max; short-circuit current ±5 mA typ
Turn-on time100 μs (VS = 5 V)
RθJA (SOT-23, DBV)220.8 °C/W

TLV333IDBVR Overview

Part: TLV333IDBVR (TLV333 / TLV2333 / TLV4333 family) — Texas Instruments

Type: Zero-Drift CMOS Operational Amplifier

Description: 1.8–5.5 V, 17 μA (typ) zero-drift CMOS op amp with 2 μV typical offset, 0.02 μV/°C drift, 350 kHz gain-bandwidth and rail-to-rail input/output; the TLV333IDBVR is the single-channel SOT-23 (5) version.

Operating Conditions:

  • Supply voltage: 1.8–5.5 V
  • Operating temperature: -40 to 125 °C (specified range)
  • Common-mode input range: (V-) − 0.1 V to (V+) + 0.1 V

Absolute Maximum Ratings:

  • Max supply voltage: 7 V
  • Signal input pin voltage: (V-) − 0.3 V to (V+) + 0.3 V
  • Signal input pin current: ±10 mA
  • Output short-circuit: continuous
  • Max junction temperature: 150 °C
  • Storage temperature: -65 to 150 °C

Key Specs:

  • Input offset voltage: 2 μV typ, 15 μV max (VS = 5 V, TA = 25 °C)
  • Offset drift: 0.02 μV/°C typ (-40 to +125 °C)
  • Quiescent current: 17 μA typ, 28 μA max per amplifier (IO = 0 mA, -40 to +125 °C)
  • Gain-bandwidth product: 350 kHz (CL = 100 pF)
  • Slew rate: 0.16 V/μs (G = 1)
  • Input voltage noise: 1.1 μVPP (0.1–10 Hz); 55 nV/√Hz at 1 kHz
  • Input bias current: ±70 pA typ (±150 pA typ over -40 to +125 °C)
  • CMRR: 102 dB min, 115 dB typ; open-loop gain: 102 dB min, 130 dB typ
  • PSRR: 1 μV/V typ, 8 μV/V max
  • Output swing from rail: 30 mV typ, 70 mV max; short-circuit current ±5 mA typ
  • Turn-on time: 100 μs (VS = 5 V)
  • RθJA (SOT-23, DBV): 220.8 °C/W

Features:

  • Low offset voltage and near-zero drift via autocalibration
  • Low 1/f noise
  • Rail-to-rail input and output
  • Internal EMI filtering
  • Unity-gain stable, no output phase reversal
  • Micro-size packages (SOT-23, SC70)

Applications:

  • Battery-powered instruments
  • Temperature measurements
  • Transducer applications
  • Electronic scales
  • Medical instrumentation
  • Handheld test equipment
  • Current sense

Package:

  • TLV333: SOT-23 (5) DBV, 2.90 × 1.60 mm; SC70 (5) DCK, 2.00 × 1.25 mm; SOIC (8) D, 4.90 × 3.91 mm
  • TLV2333: SOIC (8), VSSOP (8)
  • TLV4333: SOIC (14), TSSOP (14)

TLV333IDBVR Applications

  • Battery-Powered Instruments
  • Temperature Measurements
  • Transducer Applications
  • Electronic Scales
  • Medical Instrumentation
  • Handheld Test Equipment
  • Current Sense

TLV333IDBVR Pin Configuration

DBV Package: TLV333 5-Pin SOT23 Top View

OUT

1

5

V

2

/c45

+IN

3

4

V+

/c45

IN

  • (1) NC denotes no internal connection.

D Package: TLV333 8-Pin SOIC Top View

Pin Functions: TLV333

PIN - NAMEPIN - NO. - DBV (SOT23)PIN - NO. - DCK (SC70)PIN - NO. - D (SOIC)I/ODESCRIPTION
-IN432IInverting input
+IN313INoninverting input
NC--1, 5, 8-No internal connection (can be left floating)
OUT146OOutput
V-224-Negative (lowest) power supply
V+557-Positive (highest) power supply

+IN

/c45

V

/c45

IN

DCK Package: TLV333 5-Pin SC70 Top View

1

5

V+

2

3

4

OUT

Pin Functions: TLV2333

PIN - NAMEPIN - NO. - D (SOIC, VSSOP)I/ODESCRIPTION
-IN A2IInverting input, channel A
+IN A3INoninverting input, channel A
-IN B6IInverting input, channel B
+IN B5INoninverting input, channel B
OUT A1OOutput, channel A
OUT B7OOutput, channel B
V-4-Negative (lowest) power supply
V+8-Positive (highest) power supply

Pin Functions: TLV2333

www.ti.com www.ti.com

D Package: TLV4333 14-Pin SOIC Top View

TLV333IDBVR Electrical Characteristics

at TA = 25°C, RL = 10 k Ω connected to mid-supply, and VCM = VOUT = mid-supply (unless otherwise noted)

PARAMETERTEST CONDITIONSMINTYPMAXUNIT
OFFSET VOLTAGEOFFSET VOLTAGEOFFSET VOLTAGEOFFSET VOLTAGEOFFSET VOLTAGEOFFSET VOLTAGEOFFSET VOLTAGE
V OSInput offset voltage (1)V S = 5 V215μV
dV OS /dTV OS vs temperatureT A = -40°C to +125°C0.02μV/°C
PSRRV OS vs power supply
Long-term stability (2)
Channel separation, dc		V S = 1.8 V to 5.5 V1
1 (2)
0.1		8μV/V
μV
μV/V
INPUT BIAS CURRENTINPUT BIAS CURRENTINPUT BIAS CURRENTINPUT BIAS CURRENTINPUT BIAS CURRENTINPUT BIAS CURRENTINPUT BIAS CURRENT
I BInput bias current±70pA
Input bias current over temperatureT A = -40°C to +125°C±150pA
I OSInput offset current±140pA
NOISENOISENOISENOISENOISENOISENOISE
e nInput voltage noise densityf = 1 kHz
f = 0.01 Hz to 1 Hz		55
0.3		nV/ √ Hz
Input voltage noisef = 0.1 Hz to 10 Hz1.1μV PP
i nInput current noisef = 10 Hz100fA/ √ Hz
INPUT VOLTAGE RANGEINPUT VOLTAGE RANGEINPUT VOLTAGE RANGEINPUT VOLTAGE RANGEINPUT VOLTAGE RANGEINPUT VOLTAGE RANGEINPUT VOLTAGE RANGE
V CMCommon-mode voltage range(V-) - 0.1(V+)+ 0.1V
CMRRCommon-mode rejection ratio(V-) - 0.1 V < V CM < (V+) + 0.1 V102115dB
INPUT CAPACITANCEINPUT CAPACITANCE
Differential
Common-mode		INPUT CAPACITANCEINPUT CAPACITANCEINPUT CAPACITANCE
2
4		INPUT CAPACITANCEINPUT CAPACITANCE
pF
OPEN-LOOP GAINOPEN-LOOP GAINOPEN-LOOP GAINOPEN-LOOP GAINOPEN-LOOP GAINOPEN-LOOP GAINOPEN-LOOP GAIN
A OLOpen-loop voltage gain(V-) + 0.1 V< V O < (V+) - 0.1 V102130dB
FREQUENCY RESPONSEFREQUENCY RESPONSEFREQUENCY RESPONSEFREQUENCY RESPONSEFREQUENCY RESPONSEFREQUENCY RESPONSEFREQUENCY RESPONSE
GBWGain-bandwidth productC L = 100 pF350kHz
SRSlew rateG = 10.16V/μs
OUTPUTOUTPUTOUTPUTOUTPUTOUTPUTOUTPUTOUTPUT
Voltage output swing from railT A = -40°C to +125°C3070mV
I SCShort-circuit current±5mA
C LCapacitive load driveSee Typical CharacteristicsSee Typical CharacteristicsSee Typical CharacteristicsSee Typical Characteristics
Z OOpen-loop output impedancef = 350 kHz, I O = 0 mA2k Ω
POWER SUPPLYPOWER SUPPLYPOWER SUPPLYPOWER SUPPLYPOWER SUPPLYPOWER SUPPLYPOWER SUPPLY
V SSpecified voltage range1.85.5V
I QQuiescent current per amplifierI O = 0 mA, T A = -40°C to +125°C1728μA
Turn-on timeV S = 5 V100μs
TEMPERATURE RANGETEMPERATURE RANGETEMPERATURE RANGETEMPERATURE RANGETEMPERATURE RANGETEMPERATURE RANGETEMPERATURE RANGE
Specified range-40125°C
Operating range-40150°C
Storage range-65150°C

TLV333IDBVR Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1)

MINMAXUNIT
Supply voltageV S = (V+) - (V-)7V
Signal input pins (2)Voltage(V-) -0.3(V+) + 0.3V
Signal input pins (2)Current-1010mA
Output short-circuit (3)Output short-circuit (3)ContinuousContinuous
TemperatureOperating-40150°C
TemperatureJunction150°C
TemperatureStorage, T stg-65150°C

TLV333IDBVR Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MINNOMMAXUNIT
V SSupply voltage1.85.5V
Specified temperature range-40125°C

TLV333IDBVR Thermal Information

TLV333TLV333TLV333
THERMAL METRIC (1)D (SOIC)DBV (SOT23)DCK (SC70)UNIT
8 PINS5 PINS5 PINS
R θ JAJunction-to-ambient thermal resistance140.1220.8298.4°C/W
R θ JC(top)Junction-to-case (top) thermal resistance89.897.565.4°C/W
R θ JBJunction-to-board thermal resistance80.661.797.1°C/W
ψ JTJunction-to-top characterization parameter28.77.60.8°C/W
ψ JBJunction-to-board characterization parameter80.161.195.5°C/W
R θ JC(bot)Junction-to-case (bottom) thermal resistancen/an/an/a°C/W

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
TLV2333Texas Instruments—
TLV333Texas Instruments—
TLV333IDBVTTexas InstrumentsSOT-23-5
TLV333IDCKRTexas InstrumentsSC70-5
TLV333IDCKTTexas InstrumentsSC70-5
TLV333IDRTexas InstrumentsSOIC-8
TLV4333Texas Instruments—
TLVX333Texas Instruments—

Other Operational Amplifiers

  • LM358 – onsemi, Dual Operational Amplifier
  • NE5532 – Texas Instruments, Dual Operational Amplifier
  • AD623A – Analog Devices, Rail-to-Rail Instrumentation Amplifier
  • AD623ARMZ-REEL7 – Analog Devices, Rail-to-Rail Instrumentation Amplifier
  • AD623ARZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier
  • AD623ARZ-RL – Analog Devices, Rail-to-Rail Instrumentation Amplifier
  • AD623B – Analog Devices, Rail-to-Rail Instrumentation Amplifier
  • AD623BNZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier

All Operational Amplifiers datasheetsAll Texas Instruments datasheets (2,418)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the TLV333IDBVR

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the TLV333IDBVR run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.