TCA9548AMRGER1
The TCA9548AMRGER1 is an electronic component from Texas Instruments. View the full TCA9548AMRGER1 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
TCA9548AMRGER1 shares its datasheet with TCA9548A, whose page lists every part number it covers.
Official TCA9548AMRGER1 datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsTCA9548AMRGER1 Key Specifications
| Parameter | Value |
|---|---|
| Switch-on resistance (RON) | 10 Ω (Typ, VCC = 4.5 V to 5.5 V, IO = 15 mA) |
| Switch-on resistance (RON) | 25 Ω (Typ, VCC = 1.65 V to 1.95 V, IO = 10 mA) |
| Output current (IOL) | 6 mA (Min, VCC = 1.65 V to 5.5 V, VOL = 0.6 V) |
| Supply current (ICC) in operating mode | 30 μA (Max, VCC = 5.5 V, fSCL = 400 kHz) |
| Supply current (ICC) in standby mode | 2 μA (Max, VCC = 5.5 V, -40 °C ≤ TA ≤ 85 °C) |
| I2C bus capacitive load (Cb) | 400 pF (Max) |
| I2C clock high time (tSCH) | 0.6 μs (Min, Fast Mode) |
| I2C clock low time (tSCL) | 1.3 μs (Min, Fast Mode) |
TCA9548AMRGER1 Overview
Part: TCA9548A from Texas Instruments
Type: 8-Channel I2C Switch with Reset
Description: The TCA9548A is an 8-channel bidirectional translating I2C switch with an active-low reset input, supporting voltage-level translation between 1.8V, 2.5V, 3.3V, and 5V buses, and operating from 1.65V to 5.5V with up to 400kHz clock frequency.
Operating Conditions:
- Supply voltage: 1.65 V to 5.5 V
- Operating temperature: -40 to +125 °C (for 1.65 V ≤ VCC ≤ 3.6 V)
- I2C clock frequency: 0 to 400 kHz
Absolute Maximum Ratings:
- Max supply voltage: 7 V
- Max output current: -25 mA
- Max storage temperature: 150 °C
- Max junction temperature: 130 °C (VCC ≤ 3.6 V), 90 °C (VCC ≤ 5.5 V)
Key Specs:
- Switch-on resistance (RON): 10 Ω (Typ, VCC = 4.5 V to 5.5 V, IO = 15 mA)
- Switch-on resistance (RON): 25 Ω (Typ, VCC = 1.65 V to 1.95 V, IO = 10 mA)
- Output current (IOL): 6 mA (Min, VCC = 1.65 V to 5.5 V, VOL = 0.6 V)
- Supply current (ICC) in operating mode: 30 μA (Max, VCC = 5.5 V, fSCL = 400 kHz)
- Supply current (ICC) in standby mode: 2 μA (Max, VCC = 5.5 V, -40 °C ≤ TA ≤ 85 °C)
- I2C bus capacitive load (Cb): 400 pF (Max)
- I2C clock high time (tSCH): 0.6 μs (Min, Fast Mode)
- I2C clock low time (tSCL): 1.3 μs (Min, Fast Mode)
Features:
- 1-to-8 Bidirectional translating switches
- I2C Bus and SMBus compatible
- Active-low reset input
- Three address pins, allowing up to eight TCA9548A devices on the I2C bus
- Channel selection through an I2C Bus, in any combination
- Allows voltage-level translation between 1.8V, 2.5V, 3.3V, and 5V buses
- 5-V Tolerant inputs
- 0 to 400kHz Clock frequency
Applications:
- Servers
- Routers (telecom switching equipment)
- Factory Automation
- Products with I2C target address conflicts (such as multiple, identical temperature sensors)
Package:
- PW (TSSOP, 24)
- RGE (VQFN, 24)
- DGS (VSSOP, 24)
TCA9548AMRGER1 Features
- 1-to-8 Bidirectional translating switches
- I 2 C Bus and SMBus compatible
- Active-low reset input
- Three address pins, allowing up to eight TCA9548A devices on the I 2 C bus
- Channel selection through an I 2 C Bus, in any combination
- Power up with all switch channels deselected
- Low RON switches
- Allows voltage-level translation between 1.8V, 2.5V, 3.3V, and 5V buses
- No glitch on power up
- Supports hot insertion
- Low standby current
- Operating power-supply voltage range of 1.65V to 5.5V
- 5-V Tolerant inputs
- 0 to 400kHz Clock frequency
- Latch-up performance exceeds 100mA Per JESD 78, class II
- ESD Protection exceeds JESD 22
- -±2000V Human-body model (A114-A)
- -200V Machine model (A115-A)
- -±1000V Charged-device model (C101)
TCA9548AMRGER1 Applications
- Servers
- Routers (telecom switching equipment)
- Factory Automation
- Products with I 2 C target address conflicts (such as multiple, identical temperature sensors)
SCPS207H - MAY 2012 - REVISED SEPTEMBER 2024
TCA9548AMRGER1 Pin Configuration
Not to scale
Figure 4-1. PW, DGS Package, 24-Pin TSSOP, VSSOP (Top View)
Table 4-1. Pin Functions
| PIN | PIN | PIN | TYPE |
|---|---|---|---|
| NAME | TSSOP, VSSOP (PW, DGS) | VQFN (RGE) | TYPE |
| A0 | 1 | 22 | I |
| A1 | 2 | 23 | I |
| A2 | 21 | 18 | I |
| GND | 12 | 9 | - |
| RESET | 3 | 24 | I |
| SD0 | 4 | 1 | I/O |
| SC0 | 5 | 2 | I/O |
| SD1 | 6 | 3 | I/O |
| SC1 | 7 | 4 | I/O |
| SD2 | 8 | 5 | I/O |
| SC2 | 9 | 6 | I/O |
| SD3 | 10 | 7 | I/O |
| SC3 | 11 | 8 | I/O |
| SD4 | 13 | 10 | I/O |
| SC4 | 14 | 11 | I/O |
| SD5 | 15 | 12 | I/O |
| SC5 | 16 | 13 | I/O |
| SD6 | 17 | 14 | I/O |
| SC6 | 18 | 15 | I/O |
| SD7 | 19 | 16 | I/O |
| SC7 | 20 | 17 | I/O |
| SCL | 22 | 19 | I/O |
| SDA | 23 | 20 | I/O |
| VCC | 24 | 21 | Power |
Table 4-1. Pin Functions
Figure 4-2. RGE Package, 24-Pin VQFN (Top View)
TCA9548AMRGER1 Electrical Characteristics
VCC = 1.65 V to 5.5 V, over recommended operating free-air temperature ranges supported by Recommended Operating Conditions (unless otherwise noted) (1)
| PARAMETER | TEST CONDITIONS | V CC | MIN | MAX | UNIT | |
|---|---|---|---|---|---|---|
| V PORR | Power-on reset voltage, V CC rising | No load, V I = V CC or GND (3) | 1.5 | V | ||
| V PORF | Power-on reset voltage, V CC falling (4) | No load, V I = V CC or GND (3) | 5 V 4.5 V to 5.5 V 3.3 V | 0.8 2.6 | 4.5 | V |
| V | 3 V to 3.6 V | 1.6 | 2.8 | V | ||
| o(sw) | Switch output voltage | V i(sw) = V CC , I SWout = -100 μA | 2.5 V 2.3 V to 2.7 V 1.8 V 1.65 V to 1.95 V | 1.1 0.6 | 2 1.25 | |
| I OL | V OL = 0.4 V | 3 | mA | |||
| SDA | V OL = 0.6 V | 1.65 V to 5.5 V | 6 | |||
| I | SCL, SDA | SCL, SDA | -1 | 1 | ||
| SC7-SC0, SD7-SD0 | SC7-SC0, SD7-SD0 | -1 | 1 | |||
| I | A2-A0 RESET f SCL Operating mode | A2-A0 RESET (3) V I = V CC or GND , I O = 0 (3) | 1.65 V to 5.5 V 5.5 V 3.6 V 2.7 V 1.65 V 5.5 V 3.6 V | -1 -1 | 1 1 80 35 20 10 30 15 | μA |
| f SCL | V I = V CC or GND , I O = 0 | 2.7 V 1.65 V 5.5 V | 8 4 2 | μA | ||
| I CC | Low Standby mode | V I = GND (3) , I O = 0, -40 °C ≤ TA ≤ 85 °C | 3.6 V 2.7 V 1.65 V 5.5 V 3.6 V | 2 1 1 2 2 | ||
| High | V I = V CC , I O = 0, -40 °C ≤ TA ≤ 85 °C | 2.7 V 1.65 V 3.6 V | 1 1 2 | μA | ||
| Low | Vi = Vcc or GND, Io = 0, 85 °C < TA ≤ 125 °C | 2.7 V 1.65 V | 1.5 1 | μA μA | ||
| ΔI CC | Supply-current change SCL, | SCL or SDA input at 0.6 V, Other inputs at V CC or GND (3) SCL or SDA input at V CC - 0.6 V, Other inputs at V CC or GND (3) | 1.65 V to 5.5 V | 20 20 | μA | |
| A2-A0 | V I = V CC or GND (3) | 5 5 | pF | |||
| C i | RESET SCL | V I = V CC or GND (3) , Switch OFF | 1.65 V to 5.5 V | 28 | ||
| C io(off) (5) | SDA SC7-SC0, SD7-SD0 | V I = V CC or GND (3) , Switch OFF | 1.65 V to 5.5 V | 28 7.5 | pF |
VCC = 1.65 V to 5.5 V, over recommended operating free-air temperature ranges supported by Recommended Operating Conditions (unless otherwise noted) (1)
| PARAMETER | PARAMETER | TEST CONDITIONS | V CC | MIN | TYP (2) | MAX | UNIT |
|---|---|---|---|---|---|---|---|
| R ON | Switch-on resistance | V O = 0.4 V, I O = 15 mA | 4.5 V to 5.5 V | 4 | 10 | 20 | Ω |
| R ON | Switch-on resistance | V O = 0.4 V, I O = 15 mA | 3 V to 3.6 V | 5 | 12 | 30 | Ω |
| R ON | Switch-on resistance | V O = 0.4 V, I O = 10 mA | 2.3 V to 2.7 V | 7 | 15 | 45 | Ω |
| R ON | Switch-on resistance | V O = 0.4 V, I O = 10 mA | 1.65 V to 1.95 V | 10 | 25 | 70 | Ω |
- (1) For operation between specified voltage ranges, refer to the worst-case parameter in both applicable ranges
- (2) All typical values are at nominal supply voltage (1.8-, 2.5-,3.3-, or 5-V V CC), T A = 25°C
- (3) RESET = VCC (held high) when all other input voltages, VI = GND.
- (4) The power-on reset circuit resets the I 2 C bus logic with V CC < VPORF
- (5) Cio(ON) depends on internal capacitance and external capacitance added to the SCn lines when channels(s) are ON.
TCA9548AMRGER1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V CC | Supply voltage | Supply voltage | -0.5 | 7 | V |
| V I | Input voltage (2) | Input voltage (2) | -0.5 | 7 | V |
| I I | Input current | Input current | -20 | 20 | mA |
| I O | Output current | Output current | -25 | mA | |
| I CC | Supply current | Supply current | -100 | 100 | mA |
| T stg | Storage temperature | Storage temperature | -65 | 150 | °C |
| T J | V CC ≤ 3.6 V | 130 | °C | ||
| T J | V CC ≤ 5.5 V | 90 | °C |
TCA9548AMRGER1 Recommended Operating Conditions
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V CC | Supply voltage | -40 °C ≤ T A ≤ 85 °C | 1.65 | 5.5 | V |
| V CC | 85 °C < T A ≤ 125 °C | 1.65 | 3.6 | V | |
| V IH | High-level input voltage | SCL, SDA | 0.7 × V CC | 6 | V |
| V IH | A2-A0, RESET | 0.7 × V CC | V CC + 0.5 | V | |
| V IL | Low-level input voltage | SCL, SDA | -0.5 | 0.3 × V CC | V |
| V IL | A2-A0, RESET | -0.5 | 0.3 × V CC | V | |
| T A | Operating free-air temperature | 3.6 V < V CC ≤ 5.5 V | -40 | 85 | °C |
| T A | 1.65 V ≤ V CC ≤ 3.6 V | -40 | 125 | °C |
TCA9548AMRGER1 Thermal Information
| TCA9548A | TCA9548A | TCA9548A | ||
|---|---|---|---|---|
| THERMAL METRIC (1) | THERMAL METRIC (1) | PW (TSSOP) | RGE (VQFN) | DGS (VSSOP) |
| 24 PINS | 24 PINS | 24 PINS | ||
| R θJA | Junction-to-ambient thermal resistance | 108.8 | 57.2 | 86.1 |
| R θJC(top) | Junction-to-case (top) thermal resistance | 54.1 | 62.5 | 34.3 |
| R θJB | Junction-to-board thermal resistance | 62.7 | 34.4 | 47.3 |
| ψ JT | Junction-to-top characterization parameter | 10.9 | 3.8 | 1.5 |
| ψ JB | Junction-to-board characterization parameter | 62.3 | 34.4 | 47.0 |
| R θJC(bot) | Junction-to-case (bottom) thermal resistance | N/A | 15.5 | N/A |
TCA9548AMRGER1 Typical Application
More datasheets
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Ask your AI agent about the TCA9548AMRGER1
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TCA9548AMRGER1 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.