Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

SY7200A

Boost LED Driver

The SY7200A is a boost led driver from Silergy. View the full SY7200A datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

SY7200A shares its datasheet with SY7200, whose page lists every part number it covers.

Official SY7200A datasheet (PDF) — the source this page was extracted from.

Manufacturer

Silergy

Category

Boost LED Driver

SY7200A Key Specifications

ParameterValue
Lifecycle StatusProduction (Last Updated: 1 month ago)
Part SeriesSY7200
Feedback reference voltage196 / 200 / 204 mV (min/typ/max); LED current set by I_OUT = 0.2 V / R1
Quiescent current0.1 mA typ, 0.6 mA max (VFB = 0.3 V)
Shutdown current10 μA typ, 15 μA max (EN = 0)
Low-side main FET RDS(ON)200 mΩ typ (140–230 mΩ)
Main FET current limit2 / 2.6 / 3.5 A (min/typ/max, 10% duty)
Oscillator frequency0.8 / 1.0 / 1.2 MHz (IOUT = 100 mA)
Input UVLO threshold2.55 V typ (2.4–2.75 V), 0.1 V hysteresis
Open-LED output clamp voltage28 / 30 / 33 V
Max duty cycle90% typ; min on-time: 100 ns typ
Thermal shutdown150 °C typ, 20 °C hysteresis
Thermal resistance SOT23-6θJA 170 °C/W, θJC 130 °C/W

SY7200A Overview

Part: SY7200AABC — Silergy

Type: Boost (Step-Up) Constant-Current LED Driver

Description: 2.8–30 V input, 1 MHz fixed-frequency boost LED driver with 2 A switch current limit, 200 mV feedback reference, and open-LED protection at 30 V, driving up to eight white LEDs in series.

Operating Conditions:

  • Supply voltage: 2.8–30 V
  • Operating temperature: -40 to 85 °C ambient (junction -40 to 125 °C)
  • PWM dimming frequency on EN/PWM: 20 kHz–1 MHz

Absolute Maximum Ratings:

  • IN, EN: 32 V
  • LX: -0.3 V to 33 V (tested down to -3 V for <10 ns and up to +36 V for <50 ns)
  • OVP: 36 V
  • All other pins: 4 V
  • Power dissipation (TA = 25 °C, SOT23-6): 0.6 W
  • Max junction temperature: 125 °C
  • Storage temperature: -65 to 150 °C
  • Lead temperature (soldering, 10 s): 260 °C

Key Specs:

  • Feedback reference voltage: 196 / 200 / 204 mV (min/typ/max); LED current set by I_OUT = 0.2 V / R1
  • Quiescent current: 0.1 mA typ, 0.6 mA max (VFB = 0.3 V)
  • Shutdown current: 10 μA typ, 15 μA max (EN = 0)
  • Low-side main FET RDS(ON): 200 mΩ typ (140–230 mΩ)
  • Main FET current limit: 2 / 2.6 / 3.5 A (min/typ/max, 10% duty)
  • Oscillator frequency: 0.8 / 1.0 / 1.2 MHz (IOUT = 100 mA)
  • Input UVLO threshold: 2.55 V typ (2.4–2.75 V), 0.1 V hysteresis
  • Open-LED output clamp voltage: 28 / 30 / 33 V
  • Max duty cycle: 90% typ; min on-time: 100 ns typ
  • Thermal shutdown: 150 °C typ, 20 °C hysteresis
  • Thermal resistance SOT23-6: θJA 170 °C/W, θJC 130 °C/W

Features:

  • Input voltage range of 2.8 to 30 V
  • Switch current limit of 2 A
  • Drives LED strings up to 30 V
  • 1 MHz fixed frequency minimizes external components
  • EN/PWM dimming frequency of 20 kHz–1 MHz
  • Internal soft-start limits inrush current
  • Open LED overvoltage protection
  • RoHS compliant and halogen free

Applications:

  • GPS navigation systems
  • Handheld devices
  • Portable media players

Package:

  • SOT23-6 (3000 pcs per 7" reel, 8 mm tape)

SY7200A Features

  • Input voltage range: 2.8 to 30V
  • Switch current limit 2A
  • Drives LED strings up to 30V
  • 1MHz fixed frequency minimizes the external components
  • Dimming frequency for EN/PWM pin: 20kHz~1MHz
  • Internal softstart limits the inrush current
  • Open LED over voltage protection
  • RoHS Compliant and Halogen Free

SY7200A Applications

Figure 1. Schematic Diagram

SY7200A Electrical Characteristics

(VIN = 3.6V, TA = 25° C, unless otherwise specified)

ParameterSymbolConditionsMinTypMaxUnit
Input Voltage RangeV IN2.830V
Quiescent CurrentI QV FB =0.3V0.10.6mA
Shutdown CurrentI SHDNEN=01015μA
Feedback Reference VoltageV REF196200204mV
FB Input CurrentI FBV FB =0.3V1μA
Low Side Main FET RONR DS(ON)140200230mΩ
Main FET Current LimitI LIM10% Duty22.63.5A
EN Rising ThresholdV ENH1.5V
EN Falling ThresholdV ENL0.4V
Input UVLO ThresholdV UVLO2.42.552.75V
UVLO HysteresisV HYS0.1V
Oscillator FrequencyF OSCI OUT =100mA0.81.01.2MHz
Min On Time100ns
Max Duty Cycle90%
Thermal ShutdownT SD150°C
Thermal HysteresisT HYST20°C
Output Clamp voltageV OCL'Open LED'283033V
PWMdimming frequency20k1MHz

Note 1 : Stresses beyond the 'Absolute Maximum Ratings' may cause permanent damage to the device. These are stress ratings only. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Note 2 : θJA is measured in the natural convection at TA = 25° C on a low effective single layer thermal conductivity test board of JEDEC 51-3 thermal measurement standard. Test condition: Device mounted on 2' x 2' FR-4 substrate PCB, 2oz copper, with minimum recommended pad on top layer and thermal vias to bottom layer ground plane.

Note 3: The device is not guaranteed to function outside its operating conditions.

SY7200A Absolute Maximum Ratings

IN, EN ---------------------------------------------------------- ---------------------------------------------------- 32V

LX --------------------------------------------------------------------------------------------------- -0.3V

(

*1

)

to 33V

(

*2

OVP ---------------------------------------------------------------------------------------------------------------- 36V

All other pins --------------------------------------------------------------------------------------------------------- 4V

Power Dissipation, PD @ TA = 25° C, SOT23-6-----------------------------------------------------------------0.6W

Package Thermal Resistance (Note 2)

SOT23-6, θJA --------------------------------------------------------------------------------------- 170° C/W

SOT23-6, θJC --------------------------------------------------------------------------------------- 130° C/W

Junction Temperature Range ----------------------------------------------------------------------------------- 125° C

Lead Temperature (Soldering, 10 sec.) ------------------------------------------------------------------------ 260° C

Storage Temperature Range ------------------------------------------------------------------------- -65° C to 150° C

(*1) LX Voltage tested down to -3V<10ns

(*2) LX Voltage tested up to +36V<50ns

Input Voltage Supply-------------------------------------------------------------------------------------- 2.8V to 30V

Junction Temperature Range ------------------------------------------------------------------------ -40° C to 125° C

Ambient Temperature Range ------------------------------------------------------------------------- -40° C to 85° C

)

SY7200A Typical Application

Figure 1. Schematic Diagram

SY7200A Package Information

Notes: All dimensions are in millimeters.

All dimensions don't include mold flash & metal burr.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
SY7200Silergy—
SY7200AABCSilergySOT23-6

More datasheets

All Silergy datasheets (10)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the SY7200A

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the SY7200A run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.