SN74LVC1G04-EP

Logic Gate

The SN74LVC1G04-EP is a logic gate from Texas Instruments. View the full SN74LVC1G04-EP datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

SN74LVC1G04-EP shares its datasheet with SN74LVC1G04, whose page lists every part number it covers.

Official SN74LVC1G04-EP datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

SN74LVC1G04-EP Key Specifications

Parameter	Value
ESD CDM	750 V (AEC-Q100 class C4B)
ESD HBM	2 kV (AEC-Q100 class H2)
Logic Function	Y = A-bar (inverter)
Input Voltage Range	0V to 5.5V
Latch-Up Performance	Exceeds 100 mA per JESD 78, Class II
Output Drive Current	±24 mA at 3.3V (±32 mA at 4.5V)
Input Capacitance (Ci)	3.5 pF typ at 3.3V
Max Supply Current (ICC)	10 µA
Thermal Impedance (θJA)	206 °C/W (DBV), 252 °C/W (DCK)
Supply Voltage (VCC) Range	1.65V to 5.5V
Max Propagation Delay (Tpd)	3.3 ns at 3.3V (CL = 15 pF)
Operating Temperature Range	-40°C to 125°C (Q-suffix); -40°C to 85°C (I-suffix)
Power Dissipation Capacitance (Cpd)	18 pF typ at 3.3V, 10 MHz

SN74LVC1G04-EP Overview

Part: SN74LVC1G04-Q1 — Texas Instruments

Type: Single Inverter Gate

Description: Automotive-qualified single inverter gate designed for 1.65-V to 5.5-V VCC operation, supporting partial-power-down applications with Ioff circuitry and offering ±24-mA output drive at 3.3 V.

Operating Conditions:

Supply voltage: 1.65–5.5 V
Operating temperature: -40 to 125 °C
Input voltage: 0–5.5 V
Output voltage: 0–VCC V

Absolute Maximum Ratings:

Max supply voltage: 6.5 V
Max continuous output current: ±50 mA
Max junction/storage temperature: 150 °C

Key Specs:

Max tpd: 3.3 ns (at 3.3 V, CL = 15 pF)
Max ICC: 10 μA (VCC = 1.65 V to 5.5 V)
High-level output current (IOH): -24 mA (at VCC = 3 V)
Low-level output current (IOL): 24 mA (at VCC = 3 V)
Input capacitance (Ci): 3.5 pF (typ, at VCC = 3.3 V)
Input voltage range: -0.5 to 6.5 V
ESD HBM: 2 kV
ESD CDM: 750 V

Features:

Qualified for Automotive Applications (AEC-Q100 Grade 1)
Supports 5-V VCC Operation
Ioff Supports Partial-Power-Down Mode Operation
Inputs Accept Voltages to 5.5 V
Low Power Consumption
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II

Applications:

Package:

SOT (SOT-23) - DBV (5 pins)
SOT (SC-70) - DCK (5 pins)

SN74LVC1G04-EP Electrical Characteristics

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER	TEST CONDITIONS	V CC MIN	TYP (1)	MAX	UNIT
V OH	I OH = -100 μ A 1.65	V to 5.5 V V CC - 0.1			V
V OH	I OH = -4 mA	1.65 V	1.2		V
V OH	I OH = -8 mA	2.3 V	1.9		V
V OH	I OH = -16 mA	3 V	2.4		V
V OH	I OH = -24 mA		2.3		V
V OH	I OH = -32 mA 4.5 V		3.8		V
V OL	I OL = 100 μ A 1.65 V to 5.5 V		0.1		V
V OL	I OL = 4 mA	1.65 V	0.45		V
V OL	I OL = 8 mA	2.3 V	0.3		V
V OL	I OL = 16 mA	3 V		0.4	V
V OL	I OL = 24 mA	3 V		0.55	V
V OL	I OL = 32 mA	4.5 V		0.55	V
I I A input	V I = 5.5 V or GND	0 to 5.5 V	±5		μ A
I off	V I or V O = 5.5 V	0	±10		μ A
I CC	V I = 5.5 V or GND, I O = 0	1.65 V to 5.5 V	10		μ A
Δ I CC	One input at V CC - 0.6 V, Other inputs at V CC or GND	3 V to 5.5 V	500		μ A
C i	V I = V CC or GND	3.3 V	3.5		pF

SN74LVC1G04-EP Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

			MIN	MAX	UNIT
V CC	Supply voltage range	Supply voltage range	-0.5	6.5	V
V I	Input voltage range (2)	Input voltage range (2)	-0.5	6.5	V
V O	Voltage range applied to any output in the high-impedance or power-off state (2)	Voltage range applied to any output in the high-impedance or power-off state (2)	-0.5	6.5	V
V O	Voltage range applied to any output in the high or low state (2) (3)	Voltage range applied to any output in the high or low state (2) (3)	-0.5	V CC + 0.5	V
I IK	Input clamp current	V I < 0		-50	mA
I OK	Output clamp current	V O < 0		-50	mA
I O	Continuous output current	Continuous output current		±50	mA
	Continuous current through V CC or GND	Continuous current through V CC or GND		±100	mA
θ	Package thermal impedance (4)	DBV package		206	°C/W
JA		DCK package		252	°C/W
T stg	Storage temperature range	Storage temperature range	-65	150	°C
ESD rating	Human-body model (HBM) AEC-Q100 classification level H2	Human-body model (HBM) AEC-Q100 classification level H2		2	kV
ESD rating	Charged-device model (CDM) AEC-Q100 classification level C4B	Charged-device model (CDM) AEC-Q100 classification level C4B		750	V

(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of VCC is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.

SN74LVC1G04-EP Recommended Operating Conditions

			MIN	MAX	UNIT
V CC		Operating Data retention only	1.65 1.5	5.5	V
V IH	High-level input voltage	V CC = 1.65 V to 1.95 V	0.65 × V CC		V
V IH	High-level input voltage	V CC = 2.3 V to 2.7 V	1.7		V
V IH	High-level input voltage	V CC = 3 V to 3.6 V	2		V
V IH	High-level input voltage	V CC = 4.5 V to 5.5 V	0.7 × V CC		V
V IL	Low-level input voltage	V CC = 1.65 V to 1.95 V	0.35 × V CC		V
V IL	Low-level input voltage	V CC = 2.3 V to 2.7 V	0.7		V
V IL	Low-level input voltage	V CC = 3 V to 3.6 V		0.8	V
V IL	Low-level input voltage	V CC = 4.5 V to 5.5 V	0.3 × V	CC	V
V I	Input voltage	Input voltage	0	5.5	V
V O	Output voltage	Output voltage	0	V CC	V
I OH	High-level output current	V CC = 1.65 V		-4	mA
I OH	High-level output current	V CC = 2.3 V	-8	-4	mA
I OH	High-level output current			-16	mA
I OH	High-level output current	V CC = 3 V		-24	mA
I OH	High-level output current	V CC = 4.5 V		-32	mA
I OL	Low-level output current	V CC = 1.65 V		4	mA
I OL	Low-level output current	V CC = 2.3 V		8	mA
I OL	Low-level output current			16	mA
I OL	Low-level output current	V CC = 3 V	24		mA
I OL	Low-level output current	V CC = 4.5 V		32	mA
Δ t/ Δ v	Input transition rise or fall rate	V CC = 1.8 V ± 0.15 V, 2.5 V ± 0.2		20	ns/V
Δ t/ Δ v	Input transition rise or fall rate	V CC = 3.3 V ± 0.3 V V CC = 5 V ± 0.5 V		10 5	ns/V
T	Operating free-air temperature	Q-suffix device	-40	125	°C
A	Operating free-air temperature	I-suffix device	-40	85

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part Number	Manufacturer	Package
SN74LVC1G04	Texas Instruments	SOT-23 (DBV)
SN74LVC1G04-Q1	Texas Instruments	—
SN74LVC1G04IDCKRQ1	Texas Instruments	SC-70-5
SN74LVC1G04QDBVRQ1	Texas Instruments	SOT-23-5
SN74LVC1G04QDCKRQ1	Texas Instruments	SOT-23 (DBV)

More datasheets

All Texas Instruments datasheets (2,418)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the SN74LVC1G04-EP

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the SN74LVC1G04-EP run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.