SN74LVC1G04
Logic GateThe SN74LVC1G04 is a logic gate from Texas Instruments. View the full SN74LVC1G04 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Category
Logic Gate
Package
SOT-23 (DBV), SC-70 (DCK)
Key Specifications
| Parameter | Value |
|---|---|
| ESD Protection (MM) | Exceeds 200 V (Machine Model) |
| ESD Protection (HBM) | Exceeds 2000 V (MIL-STD-883, Method 3015) |
| Latch-Up Performance | Exceeds 100 mA (JESD 78, Class II) |
| Input Capacitance (Ci) | 3.5 pF (typ) |
| Input Voltage Range (VI) | 0 V to 5.5 V |
| Max Output Drive Current | ±24 mA at 3.3 V |
| Supply Voltage Range (VCC) | 1.65 V to 5.5 V |
| Max Propagation Delay (Tpd) | 3.3 ns at 3.3 V (CL = 15 pF) |
| Operating Temperature Range | –40°C to 125°C |
| Max Quiescent Supply Current (ICC) | 10 μA |
| Power Dissipation Capacitance (Cpd) | 18 pF (typ at 3.3V) |
Overview
Part: SN74LVC1G04-Q1 — Texas Instruments
Type: Single Inverter Gate
Description: Automotive-qualified single inverter gate designed for 1.65-V to 5.5-V VCC operation, supporting partial-power-down applications with Ioff circuitry and offering ±24-mA output drive at 3.3 V.
Operating Conditions:
- Supply voltage: 1.65–5.5 V
- Operating temperature: -40 to 125 °C
- Input voltage: 0–5.5 V
- Output voltage: 0–VCC V
Absolute Maximum Ratings:
- Max supply voltage: 6.5 V
- Max continuous output current: ±50 mA
- Max junction/storage temperature: 150 °C
Key Specs:
- Max tpd: 3.3 ns (at 3.3 V, CL = 15 pF)
- Max ICC: 10 μA (VCC = 1.65 V to 5.5 V)
- High-level output current (IOH): -24 mA (at VCC = 3 V)
- Low-level output current (IOL): 24 mA (at VCC = 3 V)
- Input capacitance (Ci): 3.5 pF (typ, at VCC = 3.3 V)
- Input voltage range: -0.5 to 6.5 V
- ESD HBM: 2 kV
- ESD CDM: 750 V
Features:
- Qualified for Automotive Applications (AEC-Q100 Grade 1)
- Supports 5-V VCC Operation
- Ioff Supports Partial-Power-Down Mode Operation
- Inputs Accept Voltages to 5.5 V
- Low Power Consumption
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
Applications:
Package:
- SOT (SOT-23) - DBV (5 pins)
- SOT (SC-70) - DCK (5 pins)
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
| PARAMETER | TEST CONDITIONS | V CC MIN | TYP (1) | MAX | UNIT |
|---|---|---|---|---|---|
| V OH | I OH = -100 μ A 1.65 | V to 5.5 V V CC - 0.1 | V | ||
| V OH | I OH = -4 mA | 1.65 V | 1.2 | V | |
| V OH | I OH = -8 mA | 2.3 V | 1.9 | V | |
| V OH | I OH = -16 mA | 3 V | 2.4 | V | |
| V OH | I OH = -24 mA | 2.3 | V | ||
| V OH | I OH = -32 mA 4.5 V | 3.8 | V | ||
| V OL | I OL = 100 μ A 1.65 V to 5.5 V | 0.1 | V | ||
| V OL | I OL = 4 mA | 1.65 V | 0.45 | V | |
| V OL | I OL = 8 mA | 2.3 V | 0.3 | V | |
| V OL | I OL = 16 mA | 3 V | 0.4 | V | |
| V OL | I OL = 24 mA | 3 V | 0.55 | V | |
| V OL | I OL = 32 mA | 4.5 V | 0.55 | V | |
| I I A input | V I = 5.5 V or GND | 0 to 5.5 V | ±5 | μ A | |
| I off | V I or V O = 5.5 V | 0 | ±10 | μ A | |
| I CC | V I = 5.5 V or GND, I O = 0 | 1.65 V to 5.5 V | 10 | μ A | |
| Δ I CC | One input at V CC - 0.6 V, Other inputs at V CC or GND | 3 V to 5.5 V | 500 | μ A | |
| C i | V I = V CC or GND | 3.3 V | 3.5 | pF |
Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V CC | Supply voltage range | Supply voltage range | -0.5 | 6.5 | V |
| V I | Input voltage range (2) | Input voltage range (2) | -0.5 | 6.5 | V |
| V O | Voltage range applied to any output in the high-impedance or power-off state (2) | Voltage range applied to any output in the high-impedance or power-off state (2) | -0.5 | 6.5 | V |
| V O | Voltage range applied to any output in the high or low state (2) (3) | Voltage range applied to any output in the high or low state (2) (3) | -0.5 | V CC + 0.5 | V |
| I IK | Input clamp current | V I < 0 | -50 | mA | |
| I OK | Output clamp current | V O < 0 | -50 | mA | |
| I O | Continuous output current | Continuous output current | ±50 | mA | |
| Continuous current through V CC or GND | Continuous current through V CC or GND | ±100 | mA | ||
| θ | Package thermal impedance (4) | DBV package | 206 | °C/W | |
| JA | DCK package | 252 | °C/W | ||
| T stg | Storage temperature range | Storage temperature range | -65 | 150 | °C |
| ESD rating | Human-body model (HBM) AEC-Q100 classification level H2 | Human-body model (HBM) AEC-Q100 classification level H2 | 2 | kV | |
| ESD rating | Charged-device model (CDM) AEC-Q100 classification level C4B | Charged-device model (CDM) AEC-Q100 classification level C4B | 750 | V |
- (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
- (2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
- (3) The value of VCC is provided in the recommended operating conditions table.
- (4) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V CC | Operating Data retention only | 1.65 1.5 | 5.5 | V | |
| V IH | High-level input voltage | V CC = 1.65 V to 1.95 V | 0.65 × V CC | V | |
| V IH | High-level input voltage | V CC = 2.3 V to 2.7 V | 1.7 | V | |
| V IH | High-level input voltage | V CC = 3 V to 3.6 V | 2 | V | |
| V IH | High-level input voltage | V CC = 4.5 V to 5.5 V | 0.7 × V CC | V | |
| V IL | Low-level input voltage | V CC = 1.65 V to 1.95 V | 0.35 × V CC | V | |
| V IL | Low-level input voltage | V CC = 2.3 V to 2.7 V | 0.7 | V | |
| V IL | Low-level input voltage | V CC = 3 V to 3.6 V | 0.8 | V | |
| V IL | Low-level input voltage | V CC = 4.5 V to 5.5 V | 0.3 × V | CC | V |
| V I | Input voltage | Input voltage | 0 | 5.5 | V |
| V O | Output voltage | Output voltage | 0 | V CC | V |
| I OH | High-level output current | V CC = 1.65 V | -4 | mA | |
| I OH | High-level output current | V CC = 2.3 V | -8 | -4 | mA |
| I OH | High-level output current | -16 | mA | ||
| I OH | High-level output current | V CC = 3 V | -24 | mA | |
| I OH | High-level output current | V CC = 4.5 V | -32 | mA | |
| I OL | Low-level output current | V CC = 1.65 V | 4 | mA | |
| I OL | Low-level output current | V CC = 2.3 V | 8 | mA | |
| I OL | Low-level output current | 16 | mA | ||
| I OL | Low-level output current | V CC = 3 V | 24 | mA | |
| I OL | Low-level output current | V CC = 4.5 V | 32 | mA | |
| Δ t/ Δ v | Input transition rise or fall rate | V CC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 | 20 | ns/V | |
| Δ t/ Δ v | Input transition rise or fall rate | V CC = 3.3 V ± 0.3 V V CC = 5 V ± 0.5 V | 10 5 | ns/V | |
| T | Operating free-air temperature | Q-suffix device | -40 | 125 | °C |
| A | Operating free-air temperature | I-suffix device | -40 | 85 |
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| SN74LVC1G04-EP | Texas Instruments | — |
| SN74LVC1G04-Q1 | Texas Instruments | — |
| SN74LVC1G04IDCKRQ1 | Texas Instruments | — |
| SN74LVC1G04QDBVRQ1 | Texas Instruments | — |
| SN74LVC1G04QDCKRQ1 | Texas Instruments | SOT-23 (DBV) |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free