Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

SN74HC125N

Quadruple Buffer with 3-State Outputs

The SN74HC125N is a quadruple buffer with 3-state outputs from Texas Instruments. View the full SN74HC125N datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

SN74HC125N shares its datasheet with SN74HC125, whose page lists every part number it covers.

Official SN74HC125N datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Quadruple Buffer with 3-State Outputs

Package

PDIP (14)

Lifecycle

Production (Last Updated: 1 day ago)

SN74HC125N Key Specifications

ParameterValue
Case/PackagePDIP
Contact PlatingGold
Height5.08 mm
High Level Output Current-7.8 mA
Lead FreeLead Free
Length19.3 mm
Lifecycle StatusProduction (Last Updated: 1 day ago)
Logic FunctionBuffer, Inverting
Low Level Output Current7.8 mA
Manufacturer Lifecycle StatusACTIVE (Last Updated: 1 day ago)
Max Operating Temperature85 °C
Max Output Current5.2 mA
Max Supply Voltage6 V
Min Operating Temperature-40 °C
Min Supply Voltage2 V
MountThrough Hole
Number of Bits4 bit
Number of Bits per Element1
Number of Channels4
Number of Circuits4
Number of Elements4
Number of Input Lines4
Number of Inputs4
Number of Output Lines4
Number of Outputs4
Number of Pins14
Operating Supply Voltage5 V
Output Current7.8 mA
PolarityNon-Inverting
Propagation Delay190 ns
Quiescent Current8 µA
Radiation HardeningNo
REACH SVHCUnaffected
RoHSCompliant
Schedule B8542390000, 8542390000|8542390000|8542390000|8542390000|8542390000
Thickness3.9 mm
Turn-On Delay Time190 ns
Width6.35 mm

SN74HC125N Overview

Part: SN74HC125 / SN54HC125 (SNx4HC125) — Texas Instruments

Type: Quadruple Buffer with 3-State Outputs

Description: Quad independent non-inverting buffers with active-low output enables (Y = A), operating from 2–6 V, with ±35 mA continuous output current rating and 14 ns typical propagation delay at 4.5 V, 50 pF.

Operating Conditions:

  • Supply voltage: 2–6 V
  • Operating temperature: -40 to 85 °C for SN74HC125 (SN54HC125 is rated -55 to 125 °C)
  • Input transition time: max 1000 ns at 2 V, 500 ns at 4.5 V, 400 ns at 6 V
  • High-level input voltage (min): 1.5 V at 2 V, 3.15 V at 4.5 V, 4.2 V at 6 V

Absolute Maximum Ratings:

  • Max supply voltage: 7 V (min -0.5 V)
  • Max continuous output current: ±35 mA
  • Max continuous current through VCC or GND: ±70 mA
  • Input/output clamp current: ±20 mA
  • Max junction temperature: 150 °C
  • Storage temperature: -65 to 150 °C

Key Specs:

  • VOH (74, 25 °C): min 4.4 V at VCC = 4.5 V, IOH = -20 μA; min 3.98 V at IOH = -6 mA
  • VOL (74, 25 °C): max 0.1 V at IOL = 20 μA; max 0.26 V at VCC = 4.5 V, IOL = 6 mA
  • Input leakage current (74): ±0.1 μA at 25 °C, ±1 μA over -40 to 85 °C (VCC = 6 V)
  • Three-state leakage current (74): ±0.5 μA max at 25 °C, ±5 μA max over -40 to 85 °C (VCC = 6 V)
  • Supply current ICC (74): 8 μA max at 25 °C, 80 μA max over -40 to 85 °C (VCC = 6 V)
  • Propagation delay A to Y (74, CL = 50 pF): 14 ns typ and 24 ns max at 4.5 V, 25 °C; 36 ns max over -40 to 85 °C
  • Transition time (74, CL = 50 pF): 8 ns typ and 12 ns max at 4.5 V, 25 °C
  • Input capacitance: 3 pF typ, 10 pF max
  • ESD: HBM ±2000 V, CDM ±500 V
  • Thermal resistance RθJA: 63.0 °C/W (PDIP) to 151.7 °C/W (TSSOP)

Features:

  • Buffered inputs
  • Wide operating voltage range: 2 V to 6 V
  • Supports fanout up to 10 LSTTL loads
  • Significant power reduction compared to LSTTL logic ICs
  • Four independent buffers with 3-state outputs

Applications:

  • Enable digital signals

Package:

  • SOIC (14), 8.70 mm × 3.90 mm (SN74HC125D)
  • SSOP (14), 6.50 mm × 5.30 mm (SN74HC125DB)
  • PDIP (14), 19.30 mm × 6.40 mm (SN74HC125N)
  • SO (14), 10.20 mm × 5.30 mm (SN74HC125NS)
  • TSSOP (14), 5.00 mm × 4.40 mm (SN74HC125PW)
  • CDIP (14), 21.30 mm × 7.60 mm (SN54HC125J)
  • LCCC (20), 8.90 mm × 8.90 mm (SN54HC125FK)

SN74HC125N Features

  • Buffered inputs
  • Wide operating voltage range: 2 V to 6 V
  • Wide operating temperature range: -40°C to +85°C
  • Supports fanout up to 10 LSTTL loads
  • Significant power reduction compared to LSTTL logic ICs

SN74HC125N Applications

SN74HC125, SN54HC125 SCLS104F - AUGUST 1984 - REVISED APRIL 2021 SN74HC125, SN54HC125

SN74HC125N Pin Configuration

Figure 5-1. D, DB, N, NS, PW, or J Package 14-Pin SOIC, SSOP, PDIP, SO, TSSOP, or CDIP Top View

SN74HC125N Electrical Characteristics

over operating free-air temperature range; typical values measured at T A = 25°C (unless otherwise noted).

PARAMETERPARAMETERTEST CONDITIONSTEST CONDITIONSV CCOperating free-air temperature (T A ) - 25°C - MINOperating free-air temperature (T A ) - 25°C - TYPOperating free-air temperature (T A ) - 25°C - MAXOperating free-air temperature (T A ) - -40°C to 85°C - MINOperating free-air temperature (T A ) - -40°C to 85°C - TYPOperating free-air temperature (T A ) - -40°C to 85°C - MAXUNIT
V OHHigh-level output voltageV I = V IH or V ILI OH = -20 μA2 V1.91.9981.9V
V OHHigh-level output voltageV I = V IH or V ILI OH = -20 μA4.5 V4.44.4994.4V
V OHHigh-level output voltageV I = V IH or V ILI OH = -20 μA6 V5.95.9995.9V
V OHHigh-level output voltageV I = V IH or V ILI OH = -6 mA4.5 V3.984.33.84V
V OHHigh-level output voltageV I = V IH or V ILI OH = -7.8 mA6 V5.485.85.34V
V OLLow-level output voltageV I = V IH or V ILI OL = 20 μA2 V0.0020.10.1V
V OLLow-level output voltageV I = V IH or V ILI OL = 20 μA4.5 V0.0010.10.1V
V OLLow-level output voltageV I = V IH or V ILI OL = 20 μA6 V0.0010.10.1V
V OLLow-level output voltageV I = V IH or V ILI OL = 6 mA4.5 V0.170.260.33V
V OLLow-level output voltageV I = V IH or V ILI OL = 7.8 mA6 V0.150.260.33V
I IInput leakage currentV I = V CC or 0V I = V CC or 06 V±0.1±0.1±0.1±1μA
I OZThree-state leakage currentV O = V CC or 06 V±0.01±0.5±5μA
I CCSupply currentV I = V CC or 0I O = 06 V88880μA
C iInput capacitance2 V to 6 V3 103 103 1010pF

SN74HC125N Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1)

MINMAXUNIT
V CCSupply voltageSupply voltage-0.57V
I IKInput clamp current (2)V I < 0 or V I > V CC±20mA
I OKOutput clamp current (2)V O < 0 or V O > V CC±20mA
I OContinuous output currentV O = 0 to V CC±35mA
Continuous current through V CC or GNDContinuous current through V CC or GND±70mA
T JJunction temperature (3)Junction temperature (3)150°C
T stgStorage temperatureStorage temperature-65150°C
  • (2) The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
  • (3) Guaranteed by design.

over operating free-air temperature range (unless otherwise noted)

V CCSupply voltageMIN - 2NOM - 5MAX - 6UNIT - V
V IHHigh-level input voltageV CC = 2 V1.5V
V IHHigh-level input voltageV CC = 4.5 V3.15V
V IHHigh-level input voltageV CC = 6 V4.2V
V ILLow-level input voltageV CC = 2 V0.5V
V ILLow-level input voltageV CC = 4.5 V1.35V
V ILLow-level input voltageV CC = 6 V1.8V
V IInput voltage0V CCV
V OOutput voltage0V CCV
t tInput transition timeV CC = 2 V1000ns
t tInput transition timeV CC = 4.5 V500ns
t tInput transition timeV CC = 6 V400ns
T AOperating free-air temperature-55125°C

www.ti.com

SN74HC125N Thermal Information

THERMAL METRIC (1)THERMAL METRIC (1)SN74HC125 - D (SOIC) - 14 PINSSN74HC125 - DB (SSOP) - 14 PINSSN74HC125 - N (PDIP) - 14 PINSSN74HC125 - NS (SO) - 14 PINSSN74HC125 - PW (TSSOP) - 14 PINSUNIT
R θJAJunction-to-ambient thermal resistance133.6108.063.0122.6151.7°C/W
R θJC(top)Junction-to-case (top) thermal resistance8957.850.781.879.4°C/W
R θJBJunction-to-board thermal resistance89.558.342.783.894.7°C/W
Ψ JTJunction-to-top characterization parameter45.518.030.345.425.2°C/W
Ψ JBJunction-to-board characterization parameter89.157.642.583.494.1°C/W
R θJC(bot)Junction-to-case (bottom) thermal resistanceN/AN/AN/AN/AN/A°C/W

SN74HC125N Typical Application

In this application, a 3-state buffer is used to enable or disable a data connection as shown in Figure 9-1 . It is common to see all four channels of a device used together for controlling a 4-bit data bus, however each channel of the device can be used independently. Unused channels should have the inputs terminated at ground or VCC and the output left unconnected.

When the output of the device is active, the data signal will be replicated at the output. When the output of the device is disabled, the output will be in a high-impedance state, and the output voltage will be determined by the circuit connected to the output pin. This circuit is most commonly used when a bus must be completely disabled. One example of this situation is when the circuitry connected to the output is to be powered off for an extended period of time to save system power, and the inputs to that circuitry cannot have a voltage present due to protective clamp diodes.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
SN54HC125FKTexas InstrumentsLCCC (20)
SN54HC125JTexas InstrumentsCDIP (14)
SN74HC125Texas InstrumentsSOIC (14)
SN74HC125DTexas InstrumentsSOIC (14)
SN74HC125DBTexas InstrumentsSSOP (14)
SN74HC125NSTexas InstrumentsSO (14)
SN74HC125PWTexas InstrumentsTSSOP (14)

More datasheets

All Texas Instruments datasheets (2,492)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the SN74HC125N

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the SN74HC125N run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.