SN74AUP1G17DPW
Single Schmitt-Trigger BufferThe SN74AUP1G17DPW is a single schmitt-trigger buffer from Texas Instruments. View the full SN74AUP1G17DPW datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
SN74AUP1G17DPW shares its datasheet with SN74AUP1G17, whose page lists every part number it covers.
Official SN74AUP1G17DPW datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Single Schmitt-Trigger Buffer
SN74AUP1G17DPW Key Specifications
| Parameter | Value |
|---|---|
| Ambient Temperature Range High | 85 °C |
| Case/Package | SC |
| Current - Output High, Low | 4mA, 4mA |
| Height | 1.1 mm |
| High Level Output Current | -4 mA |
| Input Type | Schmitt Trigger |
| Lead Free | Lead Free |
| Length | 2 mm |
| Lifecycle Status | Production (Last Updated: 16 hours ago) |
| Logic Function | Buffer, Schmitt Trigger |
| Logic Type | Buffer, Non-Inverting |
| Low Level Output Current | 4 mA |
| Manufacturer Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Max Junction Temperature (Tj) | 150 °C |
| Max Operating Temperature | 85 °C |
| Max Supply Voltage | 3.6 V |
| Min Operating Temperature | -40 °C |
| Min Supply Voltage | 800 mV |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Number of Bits | 1 bit |
| Number of Bits per Element | 1 |
| Number of Bits per Element | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Number of Elements | 1 |
| Number of Elements | 1 |
| Number of Input Lines | 1 |
| Number of Inputs | 1 |
| Number of Output Lines | 1 |
| Number of Outputs | 1 |
| Number of Pins | 5 |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Output Type | Push-Pull |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Packaging | Cut Tape |
| Packaging | MouseReel |
| Polarity | Non-Inverting |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 500 nA |
| Radiation Hardening | No |
| REACH SVHC | Unaffected |
| RoHS | Compliant |
| Schedule B | 8542390000, 8542390000|8542390000|8542390000|8542390000|8542390000 |
| Standard Pack Qty | 3000 |
| Supplier Device Package | SC-70-5 |
| Thickness | 900 µm |
| Turn-On Delay Time | 19.8 ns |
| Supply Voltage | 0.8V ~ 3.6V |
| Width | 1.25 mm |
SN74AUP1G17DPW Overview
Part: SN74AUP1G17DCK (SN74AUP1G17DCKR, SC70-5 tape-and-reel) — Texas Instruments
Type: Low-Power Single Schmitt-Trigger Buffer
Description: 0.8–3.6 V single Schmitt-trigger buffer from the AUP family with a 0.9 μA maximum ICC, 5.1 ns maximum tpd at 3.3 V, and 3.6 V I/O tolerance.
Operating Conditions:
- Supply voltage (VCC): 0.8–3.6 V
- Operating free-air temperature: -40 to 85 °C
- Input voltage: 0–3.6 V
- Output drive (IOH/IOL): ±4 mA at VCC = 3 V
Absolute Maximum Ratings:
- Max supply voltage: 4.6 V
- Max input voltage: 4.6 V
- Max continuous output current: ±20 mA
- Max continuous current through VCC or GND: ±50 mA
- Max junction temperature: 150 °C
- Storage temperature: -65 to 150 °C
Key Specs:
- ICC: 0.5 μA max at 25 °C; 0.9 μA max over -40 to 85 °C (VCC 0.8–3.6 V)
- Positive-going threshold VT+ at VCC = 3 V: 1.88–2.29 V
- Negative-going threshold VT- at VCC = 3 V: 0.88–1.24 V
- Hysteresis at VCC = 3 V: 0.79–1.31 V
- tpd (A to Y, CL = 5 pF) at 3.3 V ± 0.3 V: 1.9–5.1 ns over -40 to 85 °C (3 ns typ at 25 °C)
- Input leakage II: 0.1 μA max at 25 °C; 0.5 μA max over -40 to 85 °C
- Ioff: 0.2 μA max at 25 °C; 0.6 μA max over -40 to 85 °C (VCC = 0 V)
- Input capacitance Ci: 1.5 pF typ; output capacitance Co: 2.5 pF typ
- Thermal resistance RθJA (DCK, SC70): 284.1 °C/W
Features:
- Schmitt-trigger inputs for slow input transitions and better noise immunity
- Ioff supports partial-power-down operation
- Low dynamic power: Cpd = 4.4 pF typ at 3.3 V
- Low noise: overshoot and undershoot <10% of VCC
- 3.6 V I/O tolerant for mixed-mode signal operation
- Latch-up performance exceeds 100 mA per JESD 78, Class II
- ESD: 2000 V HBM, 1000 V CDM
- Available in the TI NanoStar™ package
Applications:
- Grid infrastructure
- PC and notebooks
- Tablets
- Factory automation and control
- Gaming
- Servers
Package:
- DCK: SC70 (5), 1.25 mm × 2.00 mm
- Other family packages: SOT-23 (5) DBV, SOT-5X3 (5) DRL, SON (6) DRY, SON (6) DSF, DSBGA (4) YFP, DSBGA (5) YZP, X2SON (5) DPW
SN74AUP1G17DPW Features
- 1 · Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Performance Tested Per JESD 22
- -2000-V Human-Body Model (A114-B, Class II)
- -1000-V Charged-Device Model (C101)
- Available in the Texas Instruments NanoStar™ Package
- Low Static-Power Consumption (ICC = 0.9 μA Maximum)
- Low Dynamic-Power Consumption (Cpd = 4.4 pF Typical at 3.3 V)
- Low Input Capacitance (Ci = 1.5 pF Typical)
- Low Noise - Overshoot and Undershoot <10% of VCC
- I off Supports Partial-Power-Down Mode Operation
- Includes Schmitt-Trigger Inputs
- Wide Operating VCC Range of 0.8 V to 3.6 V
- Optimized for 3.3-V Operation
- 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
- t pd = 5.1 ns Maximum at 3.3 V
- Suitable for Point-to-Point Applications
SN74AUP1G17DPW Applications
- Grid Infrastructure
- PC & Notebooks
- Tablets
- Factory Automation & Control
- Gaming
- Server
Logic Diagram (Positive Logic) (DBV, DCK, DPW, DRL, DRT, DRY, and YZP Packages)
1
SN74AUP1G17
SCES579J -JUNE 2004-REVISED SEPTEMBER 2017
SN74AUP1G17DPW Pin Configuration
See mechanical drawings for dimensions.
SN74AUP1G17DPW Electrical Characteristics
over operating free-air temperature range (unless otherwise noted)
| PARAMETER | TEST CONDITIONS | V CC | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| V T+ Positive-going input threshold | T A = 25°C | 0.8 V | 0.3 | 0.6 | V | |
| V T+ Positive-going input threshold | T A = -40°C to +85°C | 0.8 V | 0.3 | 0.6 | V | |
| V T+ Positive-going input threshold | T A = 25°C | 1.1 V | 0.53 | 0.9 | V | |
| V T+ Positive-going input threshold | T A = -40°C to +85°C | 1.1 V | 0.53 | 0.9 | V | |
| V T+ Positive-going input threshold | T A = 25°C | 1.4 V | 0.74 | 1.11 | V | |
| V T+ Positive-going input threshold | T A = -40°C to +85°C | 1.4 V | 0.74 | 1.11 | V | |
| voltage | T A = 25°C | 1.65 V | 0.91 | 1.29 | V | |
| V T+ Positive-going input threshold | T A = -40°C to +85°C | 1.65 V | 0.91 | 1.29 | V | |
| V T+ Positive-going input threshold | T A = 25°C | 2.3 V | 1.37 | 1.77 | V | |
| V T+ Positive-going input threshold | T A = -40°C to +85°C | 2.3 V | 1.37 | 1.77 | V | |
| V T+ Positive-going input threshold | T A = 25°C | 3 V | 1.88 | 2.29 | V | |
| V T+ Positive-going input threshold | T A = -40°C to +85°C | 3 V | 1.88 | 2.29 | V | |
| V T- Negative-going input threshold voltage | T A = 25°C | 0.8 V | 0.1 | 0.6 | V | |
| V T- Negative-going input threshold voltage | T A = -40°C to +85°C | 0.8 V | 0.1 | 0.6 | V | |
| V T- Negative-going input threshold voltage | T A = 25°C | 1.1 V | 0.26 | 0.65 | V | |
| V T- Negative-going input threshold voltage | T A = -40°C to +85°C | 1.1 V | 0.26 | 0.65 | V | |
| V T- Negative-going input threshold voltage | T A = 25°C | 1.4 V | 0.39 | 0.75 | V | |
| V T- Negative-going input threshold voltage | T A = -40°C to +85°C | 1.4 V | 0.39 | 0.75 | V | |
| V T- Negative-going input threshold voltage | T A = 25°C | 1.65 V | 0.47 | 0.84 | V | |
| V T- Negative-going input threshold voltage | T A = -40°C to +85°C | 1.65 V | 0.47 | 0.84 | V | |
| V T- Negative-going input threshold voltage | T A = 25°C | 2.3 V | 0.69 | 1.04 | V | |
| V T- Negative-going input threshold voltage | T A = -40°C to +85°C | 2.3 V | 0.69 | 1.04 | V | |
| V T- Negative-going input threshold voltage | T A = 25°C | 3 V | 0.88 | 1.24 | V | |
| V T- Negative-going input threshold voltage | T A = -40°C to +85°C | 3 V | 0.88 | 1.24 | V |
SN74AUP1G17DPW Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V CC | Supply voltage | Supply voltage | -0.5 | 4.6 | V |
| V I | Input voltage (2) | Input voltage (2) | -0.5 | 4.6 | V |
| V O | Voltage range applied to any output in the high-impedance or power-off state (2) | Voltage range applied to any output in the high-impedance or power-off state (2) | -0.5 | 4.6 | V |
| V O | Output voltage range in the high or low state (2) | Output voltage range in the high or low state (2) | -0.5 | V CC + 0.5 | V |
| I IK | Input clamp current | V I < 0 | -50 | mA | |
| I OK | Output clamp current | V O < 0 | -50 | mA | |
| I O | Continuous output current | Continuous output current | ±20 | mA | |
| Continuous current through V CC or GND | Continuous current through V CC or GND | ±50 | mA | ||
| T j | Junction temperature | Junction temperature | 150 | °C | |
| T stg | Storage temperature | Storage temperature | -65 | 150 | °C |
SN74AUP1G17DPW Recommended Operating Conditions
See (1)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V CC | Supply voltage | Supply voltage | 0.8 | 3.6 | V |
| V I | Input voltage | Input voltage | 0 | 3.6 | V |
| V O | Output voltage | Output voltage | 0 | V CC | V |
| I OH (2) | High-level output current | V CC = 0.8 V | -20 | μA | |
| High-level output current | V CC = 1.1 V | -1.1 | |||
| High-level output current | V CC = 1.4 V | -1.7 | |||
| V CC = 1.65 V CC = 2.3 V V CC = 3 V | -1.9 -3.1 -4 | mA | |||
| V CC = 0.8 V V CC = 1.1 V | 20 1.1 | μA | |||
| (2) | V CC = 1.4 V | 1.7 | |||
| I OL | Low-level output current | V CC = 1.65 V | 1.9 | mA | |
| Low-level output current | V CC = 2.3 V V CC = 3 V | 3.1 4 | |||
| T A | Operating free-air temperature | -40 | 85 | °C |
SN74AUP1G17DPW Thermal Information
| SN74AUP1G17 - THERMAL METRIC (1) | DBV (SOT-23) - 5 PINS | DCK (SC70) - 5 PINS | DRL (SOT-5X3) - 5 PINS | DPW (X2SON) - 5 PINS | DRY (SON) - 6 PINS | DSF (SON) - 6 PINS | YFP (DSBGA) - 4 PINS | YZP (DSBGA) - 5 PINS | UNIT | |
|---|---|---|---|---|---|---|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance | 267.2 | 284.1 | 294.7 | 489.2 | 347.8 | 386.2 | 179.3 | 146.2 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance | 191.9 | 208.5 | 132.5 | 226.3 | 237.7 | 192.9 | 2.8 | 1.4 | °C/W |
| R θ JB | Junction-to-board thermal resistance | 101.1 | 103.1 | 143.6 | 352.9 | 210.6 | 242.2 | 58.3 | 39.3 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 83.0 | 76.6 | 14.5 | 38.2 | 64.4 | 28.9 | 1.1 | 0.7 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 100.8 | 102.3 | 144.1 | 352.1 | 210.6 | 241.9 | 58.6 | 39.8 | °C/W |
| R θ JC(bot) | Junction-to-case (bottom) thermal resistance | N/A | N/A | N/A | 150.8 | N/A | N/A | N/A | N/A | °C/W |
SN74AUP1G17DPW Typical Application
There are many situations in which a device needs to be initialized or held off for a short time at system turn-on. This application of the SN74AUP1G17 utilizes the delay created in an RC circuit to hold a line low for a short time when the system is first started, then maintains the line high while the system operates. The SN74AUP1G17 is ideal for this application because it must be tied directly to the primary supply for correct operation and is designed to draw minimal supply current during operation.
SN74AUP1G17DPW Package Information
PLASTIC SMALL OUTLINE - NO LEAD
- All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M.
- This drawing is subject to change without notice.
- Reference JEDEC registration MO-287, variation X2AAF.
PLASTIC SMALL OUTLINE - NO LEAD
NOTES: (continued)
- For more information, see Texas Instruments literature number SLUA271 (www.ti.com/lit/slua271).
PLASTIC SMALL OUTLINE - NO LEAD
SOLDER PASTE EXAMPLE BASED ON 0.09 mm THICK STENCIL
PRINTED SOLDER COVERAGE BY AREA UNDER PACKAGE SCALE:40X
4220597/B 06/2022
- Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations.
SCALE 8.0
0
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| SN74AUP1G17 | Texas Instruments | — |
| SN74AUP1G17-EP | Texas Instruments | — |
| SN74AUP1G17DBV | Texas Instruments | — |
| SN74AUP1G17DBVR | Texas Instruments | — |
| SN74AUP1G17DBVR.B | Texas Instruments | — |
| SN74AUP1G17DBVT | Texas Instruments | — |
| SN74AUP1G17DBVT.B | Texas Instruments | — |
| SN74AUP1G17DCK | Texas Instruments | — |
| SN74AUP1G17DCKR | Texas Instruments | 5-TSSOP, SC-70-5, SOT-353 |
| SN74AUP1G17DCKR.B | Texas Instruments | — |
| SN74AUP1G17DCKT | Texas Instruments | — |
| SN74AUP1G17DCKT.B | Texas Instruments | — |
| SN74AUP1G17DPWR | Texas Instruments | — |
| SN74AUP1G17DPWR.B | Texas Instruments | — |
| SN74AUP1G17DRL | Texas Instruments | — |
| SN74AUP1G17DRLR | Texas Instruments | — |
| SN74AUP1G17DRLR.B | Texas Instruments | — |
| SN74AUP1G17DRY | Texas Instruments | — |
| SN74AUP1G17DRYR | Texas Instruments | — |
| SN74AUP1G17DRYR.B | Texas Instruments | — |
| SN74AUP1G17DSF | Texas Instruments | — |
| SN74AUP1G17DSFR | Texas Instruments | — |
| SN74AUP1G17DSFR.B | Texas Instruments | — |
| SN74AUP1G17YFP | Texas Instruments | — |
| SN74AUP1G17YFPR | Texas Instruments | — |
| SN74AUP1G17YFPR.B | Texas Instruments | — |
| SN74AUP1G17YZP | Texas Instruments | — |
| SN74AUP1G17YZPR | Texas Instruments | — |
| SN74AUP1G17YZPR.B | Texas Instruments | — |
More datasheets
Ask your AI agent about the SN74AUP1G17DPW
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the SN74AUP1G17DPW run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.