Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

SN74AUP1G17DBVT

Single Schmitt-Trigger Buffer

The SN74AUP1G17DBVT is a single schmitt-trigger buffer from Texas Instruments. View the full SN74AUP1G17DBVT datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

SN74AUP1G17DBVT shares its datasheet with SN74AUP1G17, whose page lists every part number it covers.

Official SN74AUP1G17DBVT datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Single Schmitt-Trigger Buffer

SN74AUP1G17DBVT Key Specifications

ParameterValue
Ambient Temperature Range High85 °C
Case/PackageSC
Current - Output High, Low4mA, 4mA
Height1.1 mm
High Level Output Current-4 mA
Input TypeSchmitt Trigger
Lead FreeLead Free
Length2 mm
Lifecycle StatusProduction (Last Updated: 16 hours ago)
Logic FunctionBuffer, Schmitt Trigger
Logic TypeBuffer, Non-Inverting
Low Level Output Current4 mA
Manufacturer Lifecycle StatusACTIVE (Last Updated: 16 hours ago)
Max Junction Temperature (Tj)150 °C
Max Operating Temperature85 °C
Max Supply Voltage3.6 V
Min Operating Temperature-40 °C
Min Supply Voltage800 mV
MountSurface Mount
Mounting TypeSurface Mount
Number of Bits1 bit
Number of Bits per Element1
Number of Bits per Element1
Number of Channels1
Number of Circuits1
Number of Elements1
Number of Elements1
Number of Input Lines1
Number of Inputs1
Number of Output Lines1
Number of Outputs1
Number of Pins5
Operating Temperature-40°C ~ 85°C (TA)
Output TypePush-Pull
Package / Case5-TSSOP, SC-70-5, SOT-353
PackagingCut Tape
PackagingMouseReel
PolarityNon-Inverting
Propagation Delay5.1 ns
Quiescent Current500 nA
Radiation HardeningNo
REACH SVHCUnaffected
RoHSCompliant
Schedule B8542390000, 8542390000|8542390000|8542390000|8542390000|8542390000
Standard Pack Qty3000
Supplier Device PackageSC-70-5
Thickness900 µm
Turn-On Delay Time19.8 ns
Supply Voltage0.8V ~ 3.6V
Width1.25 mm

SN74AUP1G17DBVT Overview

Part: SN74AUP1G17DCK (SN74AUP1G17DCKR, SC70-5 tape-and-reel) — Texas Instruments

Type: Low-Power Single Schmitt-Trigger Buffer

Description: 0.8–3.6 V single Schmitt-trigger buffer from the AUP family with a 0.9 μA maximum ICC, 5.1 ns maximum tpd at 3.3 V, and 3.6 V I/O tolerance.

Operating Conditions:

  • Supply voltage (VCC): 0.8–3.6 V
  • Operating free-air temperature: -40 to 85 °C
  • Input voltage: 0–3.6 V
  • Output drive (IOH/IOL): ±4 mA at VCC = 3 V

Absolute Maximum Ratings:

  • Max supply voltage: 4.6 V
  • Max input voltage: 4.6 V
  • Max continuous output current: ±20 mA
  • Max continuous current through VCC or GND: ±50 mA
  • Max junction temperature: 150 °C
  • Storage temperature: -65 to 150 °C

Key Specs:

  • ICC: 0.5 μA max at 25 °C; 0.9 μA max over -40 to 85 °C (VCC 0.8–3.6 V)
  • Positive-going threshold VT+ at VCC = 3 V: 1.88–2.29 V
  • Negative-going threshold VT- at VCC = 3 V: 0.88–1.24 V
  • Hysteresis at VCC = 3 V: 0.79–1.31 V
  • tpd (A to Y, CL = 5 pF) at 3.3 V ± 0.3 V: 1.9–5.1 ns over -40 to 85 °C (3 ns typ at 25 °C)
  • Input leakage II: 0.1 μA max at 25 °C; 0.5 μA max over -40 to 85 °C
  • Ioff: 0.2 μA max at 25 °C; 0.6 μA max over -40 to 85 °C (VCC = 0 V)
  • Input capacitance Ci: 1.5 pF typ; output capacitance Co: 2.5 pF typ
  • Thermal resistance RθJA (DCK, SC70): 284.1 °C/W

Features:

  • Schmitt-trigger inputs for slow input transitions and better noise immunity
  • Ioff supports partial-power-down operation
  • Low dynamic power: Cpd = 4.4 pF typ at 3.3 V
  • Low noise: overshoot and undershoot <10% of VCC
  • 3.6 V I/O tolerant for mixed-mode signal operation
  • Latch-up performance exceeds 100 mA per JESD 78, Class II
  • ESD: 2000 V HBM, 1000 V CDM
  • Available in the TI NanoStar™ package

Applications:

  • Grid infrastructure
  • PC and notebooks
  • Tablets
  • Factory automation and control
  • Gaming
  • Servers

Package:

  • DCK: SC70 (5), 1.25 mm × 2.00 mm
  • Other family packages: SOT-23 (5) DBV, SOT-5X3 (5) DRL, SON (6) DRY, SON (6) DSF, DSBGA (4) YFP, DSBGA (5) YZP, X2SON (5) DPW

SN74AUP1G17DBVT Features

  • 1 · Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
  • -2000-V Human-Body Model (A114-B, Class II)
  • -1000-V Charged-Device Model (C101)
  • Available in the Texas Instruments NanoStar™ Package
  • Low Static-Power Consumption (ICC = 0.9 μA Maximum)
  • Low Dynamic-Power Consumption (Cpd = 4.4 pF Typical at 3.3 V)
  • Low Input Capacitance (Ci = 1.5 pF Typical)
  • Low Noise - Overshoot and Undershoot <10% of VCC
  • I off Supports Partial-Power-Down Mode Operation
  • Includes Schmitt-Trigger Inputs
  • Wide Operating VCC Range of 0.8 V to 3.6 V
  • Optimized for 3.3-V Operation
  • 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
  • t pd = 5.1 ns Maximum at 3.3 V
  • Suitable for Point-to-Point Applications

SN74AUP1G17DBVT Applications

  • Grid Infrastructure
  • PC & Notebooks
  • Tablets
  • Factory Automation & Control
  • Gaming
  • Server

Logic Diagram (Positive Logic) (DBV, DCK, DPW, DRL, DRT, DRY, and YZP Packages)

1

SN74AUP1G17

SCES579J -JUNE 2004-REVISED SEPTEMBER 2017

SN74AUP1G17DBVT Pin Configuration

See mechanical drawings for dimensions.

SN74AUP1G17DBVT Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)

PARAMETERTEST CONDITIONSV CCMINTYPMAXUNIT
V T+ Positive-going input thresholdT A = 25°C0.8 V0.30.6V
V T+ Positive-going input thresholdT A = -40°C to +85°C0.8 V0.30.6V
V T+ Positive-going input thresholdT A = 25°C1.1 V0.530.9V
V T+ Positive-going input thresholdT A = -40°C to +85°C1.1 V0.530.9V
V T+ Positive-going input thresholdT A = 25°C1.4 V0.741.11V
V T+ Positive-going input thresholdT A = -40°C to +85°C1.4 V0.741.11V
voltageT A = 25°C1.65 V0.911.29V
V T+ Positive-going input thresholdT A = -40°C to +85°C1.65 V0.911.29V
V T+ Positive-going input thresholdT A = 25°C2.3 V1.371.77V
V T+ Positive-going input thresholdT A = -40°C to +85°C2.3 V1.371.77V
V T+ Positive-going input thresholdT A = 25°C3 V1.882.29V
V T+ Positive-going input thresholdT A = -40°C to +85°C3 V1.882.29V
V T- Negative-going input threshold voltageT A = 25°C0.8 V0.10.6V
V T- Negative-going input threshold voltageT A = -40°C to +85°C0.8 V0.10.6V
V T- Negative-going input threshold voltageT A = 25°C1.1 V0.260.65V
V T- Negative-going input threshold voltageT A = -40°C to +85°C1.1 V0.260.65V
V T- Negative-going input threshold voltageT A = 25°C1.4 V0.390.75V
V T- Negative-going input threshold voltageT A = -40°C to +85°C1.4 V0.390.75V
V T- Negative-going input threshold voltageT A = 25°C1.65 V0.470.84V
V T- Negative-going input threshold voltageT A = -40°C to +85°C1.65 V0.470.84V
V T- Negative-going input threshold voltageT A = 25°C2.3 V0.691.04V
V T- Negative-going input threshold voltageT A = -40°C to +85°C2.3 V0.691.04V
V T- Negative-going input threshold voltageT A = 25°C3 V0.881.24V
V T- Negative-going input threshold voltageT A = -40°C to +85°C3 V0.881.24V

SN74AUP1G17DBVT Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1)

MINMAXUNIT
V CCSupply voltageSupply voltage-0.54.6V
V IInput voltage (2)Input voltage (2)-0.54.6V
V OVoltage range applied to any output in the high-impedance or power-off state (2)Voltage range applied to any output in the high-impedance or power-off state (2)-0.54.6V
V OOutput voltage range in the high or low state (2)Output voltage range in the high or low state (2)-0.5V CC + 0.5V
I IKInput clamp currentV I < 0-50mA
I OKOutput clamp currentV O < 0-50mA
I OContinuous output currentContinuous output current±20mA
Continuous current through V CC or GNDContinuous current through V CC or GND±50mA
T jJunction temperatureJunction temperature150°C
T stgStorage temperatureStorage temperature-65150°C

See (1)

MINMAXUNIT
V CCSupply voltageSupply voltage0.83.6V
V IInput voltageInput voltage03.6V
V OOutput voltageOutput voltage0V CCV
I OH (2)High-level output currentV CC = 0.8 V-20μA
High-level output currentV CC = 1.1 V-1.1
High-level output currentV CC = 1.4 V-1.7
V CC = 1.65
V CC = 2.3 V
V CC = 3 V
-1.9
-3.1
-4
mA
V CC = 0.8 V
V CC = 1.1 V
20
1.1
μA
(2)V CC = 1.4 V1.7
I OLLow-level output currentV CC = 1.65 V1.9mA
Low-level output currentV CC = 2.3 V
V CC = 3 V
3.1
4
T AOperating free-air temperature-4085°C

SN74AUP1G17DBVT Thermal Information

SN74AUP1G17 - THERMAL METRIC (1)DBV (SOT-23) - 5 PINSDCK (SC70) - 5 PINSDRL (SOT-5X3) - 5 PINSDPW (X2SON) - 5 PINSDRY (SON) - 6 PINSDSF (SON) - 6 PINSYFP (DSBGA) - 4 PINSYZP (DSBGA) - 5 PINSUNIT
R θ JAJunction-to-ambient thermal resistance267.2284.1294.7489.2347.8386.2179.3146.2°C/W
R θ JC(top)Junction-to-case (top) thermal resistance191.9208.5132.5226.3237.7192.92.81.4°C/W
R θ JBJunction-to-board thermal resistance101.1103.1143.6352.9210.6242.258.339.3°C/W
ψ JTJunction-to-top characterization parameter83.076.614.538.264.428.91.10.7°C/W
ψ JBJunction-to-board characterization parameter100.8102.3144.1352.1210.6241.958.639.8°C/W
R θ JC(bot)Junction-to-case (bottom) thermal resistanceN/AN/AN/A150.8N/AN/AN/AN/A°C/W

SN74AUP1G17DBVT Typical Application

There are many situations in which a device needs to be initialized or held off for a short time at system turn-on. This application of the SN74AUP1G17 utilizes the delay created in an RC circuit to hold a line low for a short time when the system is first started, then maintains the line high while the system operates. The SN74AUP1G17 is ideal for this application because it must be tied directly to the primary supply for correct operation and is designed to draw minimal supply current during operation.

SN74AUP1G17DBVT Package Information

PLASTIC SMALL OUTLINE - NO LEAD

  1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M.
  2. This drawing is subject to change without notice.
  3. Reference JEDEC registration MO-287, variation X2AAF.

PLASTIC SMALL OUTLINE - NO LEAD

NOTES: (continued)

  1. For more information, see Texas Instruments literature number SLUA271 (www.ti.com/lit/slua271).

PLASTIC SMALL OUTLINE - NO LEAD

SOLDER PASTE EXAMPLE BASED ON 0.09 mm THICK STENCIL

PRINTED SOLDER COVERAGE BY AREA UNDER PACKAGE SCALE:40X

4220597/B 06/2022

  1. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations.

SCALE 8.0

0

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
SN74AUP1G17Texas Instruments—
SN74AUP1G17-EPTexas Instruments—
SN74AUP1G17DBVTexas Instruments—
SN74AUP1G17DBVRTexas Instruments—
SN74AUP1G17DBVR.BTexas Instruments—
SN74AUP1G17DBVT.BTexas Instruments—
SN74AUP1G17DCKTexas Instruments—
SN74AUP1G17DCKRTexas Instruments5-TSSOP, SC-70-5, SOT-353
SN74AUP1G17DCKR.BTexas Instruments—
SN74AUP1G17DCKTTexas Instruments—
SN74AUP1G17DCKT.BTexas Instruments—
SN74AUP1G17DPWTexas Instruments—
SN74AUP1G17DPWRTexas Instruments—
SN74AUP1G17DPWR.BTexas Instruments—
SN74AUP1G17DRLTexas Instruments—
SN74AUP1G17DRLRTexas Instruments—
SN74AUP1G17DRLR.BTexas Instruments—
SN74AUP1G17DRYTexas Instruments—
SN74AUP1G17DRYRTexas Instruments—
SN74AUP1G17DRYR.BTexas Instruments—
SN74AUP1G17DSFTexas Instruments—
SN74AUP1G17DSFRTexas Instruments—
SN74AUP1G17DSFR.BTexas Instruments—
SN74AUP1G17YFPTexas Instruments—
SN74AUP1G17YFPRTexas Instruments—
SN74AUP1G17YFPR.BTexas Instruments—
SN74AUP1G17YZPTexas Instruments—
SN74AUP1G17YZPRTexas Instruments—
SN74AUP1G17YZPR.BTexas Instruments—

More datasheets

All Texas Instruments datasheets (2,554)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the SN74AUP1G17DBVT

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the SN74AUP1G17DBVT run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.