RT1060

Part: i.MX RT1060 — NXP Semiconductors

Type: ARM Cortex-M7 Crossover Processor

Description: A 600 MHz Arm Cortex-M7 processor with 1 MB on-chip RAM, integrated DCDC and LDO, and a wide range of memory and peripheral interfaces for real-time applications.

Operating Conditions:

• Operating temperature: 0 to +95 °C (suffix-dependent — see Table 1 for grade-specific ranges)
• Max CPU frequency: 600 MHz

Absolute Maximum Ratings:

Key Specs:

• Core: Single Arm Cortex-M7
• CPU Frequency: 600 MHz
• On-chip RAM: 1 MB (512 KB configurable as TCM/OCRAM, 512 KB dedicated OCRAM)
• Boot ROM: 128 KB
• L1 Instruction Cache: 32 KB
• L1 Data Cache: 32 KB
• ADC: Two 12-bit, 16-channel (20-channel total)
• Analog Comparators (ACMP): Four
• USB: Two USB 2.0 OTG controllers with integrated PHY

Features:

• Full featured Floating Point Unit (FPU)
• Integrated MPU, up to 16 individual protection regions
• External memory interfaces: SDRAM, RAW NAND FLASH, NOR FLASH, SD/eMMC, Quad SPI
• Display Interface: Parallel RGB LCD interface (8/16/24 bit, up to WXGA resolution), Smart LCD display
• Audio: S/PDIF, Three SAI modules (I2S, AC97, TDM), MQS interface
• Generic 2D graphics engine: BitBlit, alpha/chroma key, Porter-duff blending, image rotation, color space conversion
• Connectivity: Two 10/100M Ethernet, Eight UARTs, Four I2C, Four SPI, Two FlexCAN, One FlexCAN (with Flexible Data-Rate), Three FlexIO
• Integrated power management: On-chip DCDC and LDO, Temperature sensor
• Security: High Assurance Boot (HAB), Data Co-Processor (DCP) with AES/SHA/CRC, Bus Encryption Engine (BEE) for on-the-fly QSPI Flash decryption, TRNG, SNVS, Secure RTC, ZMK, SJC
• Debug: Arm CoreSight, TPIU, CTI, 5-pin (JTAG) and SWD interfaces

Applications:

• Industrial Human Machine Interfaces (HMI)
• Motor Control
• Home Appliance

Package:

• 196-pin MAPBGA, 10 x 10 mm, 0.65 mm pitch
• 196-pin MAPBGA, 12 x 12 mm, 0.8 mm pitch

The i.MX RT1060 processors are based on Arm Cortex-M7 Core Platform, which has the following features:

• Supports single Arm Cortex-M7 Core with:
• 32 KB L1 Instruction Cache
• 32 KB L1 Data Cache
• Full featured Floating Point Unit (FPU) with support of the VFPv5 architecture
• Support the Armv7-M Thumb instruction set
• Integrated MPU, up to 16 individual protection regions
• Tightly coupled GPIOs, operating at the same frequency as Arm Core
• Up to 512 KB I-TCM and D-TCM in total
• Frequency of 600 MHz
• Cortex M7 CoreSight™ components integration for debug
• Frequency of the core, as per Table 10, "Operating ranges," on page 24.

The SoC-level memory system consists of the following additional components:

• Boot ROM (128 KB)

• On-chip RAM (1 MB)

• -512 KB OCRAM shared between ITCM/DTCM and OCRAM

• -Dedicate 512 KB OCRAM

• External memory interfaces:

• 8/16-bit SDRAM, up to SDRAM-133/SDRAM-166

• 8/16-bit SLC NAND FLASH, with ECC handled in software

• SD/eMMC

• SPI NOR/NAND FLASH

• Parallel NOR FLASH with XIP support

• Two single/dual channel Quad SPI FLASH with XIP support

• Timers and PWMs:

• Two General Programmable Timers (GPT)

• -4-channel generic 32-bit resolution timer for each

• -Each support standard capture and compare operation

• Four Periodical Interrupt Timers (PIT)

• -Generic 32-bit resolution timer

• -Periodical interrupt generation

• Four Quad Timers (QTimer)

• -4-channel generic 16-bit resolution timer for each

• -Each support standard capture and compare operation

• -Quadrature decoder integrated

• Four FlexPWMs

• -Up to 8 individual PWM channels per each

• -16-bit resolution PWM suitable for Motor Control applications

• Four Quadrature Encoder/Decoders

Each i.MX RT1060 processor enables the following interfaces to external devices (some of them are muxed and not available simultaneously):

• Display Interface:
• Parallel RGB LCD interface
• -Support 8/16/24 bit interface
• -Support up to WXGA resolution
• -Support Index color with 256 entry x 24 bit color LUT
• -Smart LCD display with 8/16-bit MPU/8080 interface
• Audio:
• S/PDIF input and output
• Three synchronous audio interface (SAI) modules supporting I2S, AC97, TDM, and codec/DSP interfaces
• MQS interface for medium quality audio via GPIO pads
• Generic 2D graphics engine:
• BitBlit
• Flexible image composition options-alpha, chroma key
• Porter-duff blending
• Image rotation (90 , 180 , 270 )
• Image size
• Color space conversion
• Multiple pixel format support (RGB, YUV444, YUV422, YUV420, YUV400)
• Standard 2D-DMA operation
• Camera sensors:
• Support 24-bit, 16-bit, and 8-bit CSI input
• Connectivity:
• Two USB 2.0 OTG controllers with integrated PHY interfaces
• Two Ultra Secure Digital Host Controller (uSDHC) interfaces
• -MMC 4.5 compliance with HS200 support up to 200 MB/sec

This section provides the device and module-level electrical characteristics for the i.MX RT1060 processors.

Table 9 shows the 10 x 10 MM package thermal resistance data.

Table 8. 10 x 10 MM thermal resistance data

Plastic Package

196-pin MAPBGA, 10 x 10 mm, 0.65 mm pitch

196-pin MAPBGA, 12 x 12 mm, 0.8 mm pitch