OPA2340UA/2K5G4

Part: OPA2340UA/2K5 (OPA340 / OPA2340 / OPA4340 series) — Texas Instruments

Type: Single-Supply Rail-to-Rail CMOS Operational Amplifier (dual, OPA2340)

Description: Dual rail-to-rail input/output CMOS op amp for 2.7–5.5 V single-supply operation, with 5.5 MHz gain-bandwidth, 6 V/μs slew rate and 750 μA quiescent current per channel.

Operating Conditions:

• Supply voltage: 2.7–5.5 V specified (operation down to 2.5 V)
• Operating temperature: -40 to 85 °C specified; -55 to 125 °C operating
• Input common-mode range: -0.3 V to (V+) + 0.3 V

Absolute Maximum Ratings:

• Max supply voltage: 5.5 V
• Signal input terminal current: 10 mA
• Max junction temperature: 150 °C
• Storage temperature: -55 to 125 °C

Key Specs:

• Input offset voltage: ±150 μV typ, ±500 μV max (VS = 5 V, TA = 25 °C)
• Input offset drift: ±2.5 μV/°C typ (-40 to 85 °C, VS = 5 V)
• Input bias current: ±0.2 pA typ, ±10 pA max (TA = 25 °C)
• Gain-bandwidth product: 5.5 MHz (G = 1)
• Slew rate: 6 V/μs (VS = 5 V, G = 1, CL = 100 pF)
• Open-loop gain: 120 dB typ (RL = 10 kΩ), 124 dB typ (RL = 100 kΩ)
• CMRR: 92 dB typ (-0.3 V < VCM < (V+) - 1.8 V)
• Input voltage noise density: 25 nV/√Hz at 1 kHz
• THD+N: 0.0007% (VS = 5 V, VO = 3 VPP, G = 1, f = 1 kHz)
• Output short-circuit current: ±50 mA typ
• ESD: HBM ±600 V, CDM ±250 V

Features:

• Rail-to-rail input
• Rail-to-rail output (within 1 mV)
• Micro-size packages
• Wide bandwidth: 5.5 MHz
• High slew rate: 6 V/μs
• Low THD+N: 0.0007% (f = 1 kHz)
• Low quiescent current: 750 μA/channel
• Single, dual and quad versions

Applications:

• Driving A/D converters
• PCMCIA cards
• Data acquisition
• Process control
• Audio processing
• Communications
• Active filters
• Test equipment

Package:

• OPA2340: SOIC (8), 4.90 mm × 3.91 mm
• OPA2340: VSSOP (8), 3.00 mm × 3.00 mm
• OPA2340: PDIP (8), 9.81 mm × 6.35 mm
• Series also offers OPA340 in SOT-23 (5) and OPA4340 in SOIC (14) and SSOP (16)

• 1 · Rail-to-Rail Input
• Rail-to-Rail Output (Within 1 mV)
• Micro Size Packages
• Wide Bandwidth: 5.5 MHz
• High Slew Rate: 6 V/μs
• Low THD + Noise: 0.0007% (f = 1 kHz)
• Low Quiescent Current: 750 μA/Channel
• Single, Dual, and Quad Versions

• Driving A/D Converters
• PCMCIA Cards
• Data Acquisition
• Process Control
• Audio Processing
• Communications
• Active Filters
• Test Equipment

OPA340: DBV Package 5-Pin SOT-23 Top View

Pin Functions: OPA340

At TA = 25°C, RL = 10 k Ω connected to VS/2, and VOUT = VS/2, unless otherwise noted.

At TA = 25°C, RL = 10 k Ω connected to VS/2, and VOUT = VS/2, unless otherwise noted.

over operating free-air temperature range (unless otherwise noted) (1)

over operating free-air temperature range (unless otherwise noted)

The OPAx340 amplifier is a single-supply, CMOS operational amplifier with 5.5-MHz unity-gain bandwidth and supply current of 950 μA. Its performance is optimized for low-voltage (2.7 V to 5.5 V), single-supply applications, with its input common-mode voltage linear range extending 300 mV beyond the rails and the output voltage swing within 5 mV of either rail. The OPAx340 series features wide bandwidth and unity-gain stability with rail-torail input and output for increased dynamic range. Power-supply pins must be bypassed with 0.01-μF ceramic capacitors.