OPA2134UA/2K5.B
Audio Operational AmplifiersThe OPA2134UA/2K5.B is a audio operational amplifiers from Texas Instruments. View the full OPA2134UA/2K5.B datasheet below including electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Category
Operational AmplifiersOverview
Part: OPA134, OPA2134, OPA4134 (OPAx134)
Type: High-Performance, SoundPlus™ Audio Operational Amplifier
Description: Ultra-low distortion (0.00008%), low-noise (8nV/√Hz) audio operational amplifiers with true FET-input, 20V/μs slew rate, 8MHz bandwidth, and a wide supply range of ±2.5V to ±18V.
Operating Conditions:
- Supply voltage: ±2.5V to ±18V (dual supply), 5V to 36V (single supply)
- Operating temperature: -40 to +85 °C
- Slew rate: ±20 V/μs
- Gain bandwidth product: 8 MHz
Absolute Maximum Ratings:
- Max supply voltage: 36 V ((V+) - (V-))
- Max input current: ±10 mA
- Max junction temperature: 150 °C
- Max storage temperature: 125 °C
Key Specs:
- Total harmonic distortion plus noise (THD+N): 0.00008% (f = 1kHz, G = 1, V_O = 3V rms, R_L = 2kΩ)
- Input voltage noise density (e_n): 8 nV/√Hz (f = 1kHz)
- Input offset voltage (V_OS): ±1 mV (Typ), ±3.5 mV (Max) (T = -40°C to +85°C)
- Input bias current (I_B): ±5 pA (Typ), ±5 nA (Max) (T_A = -40°C to +85°C)
- Open-loop voltage gain (A_OL): 120 dB (Typ), 104 dB (Min) (R_L = 2kΩ or 10kΩ)
- Quiescent current (I_Q) per amplifier: 4 mA (Typ), 5 mA (Max) (I_O = 0mA)
- Output short-circuit current (I_SC): 36 mA (Sourcing)
- Common-mode rejection ratio (CMRR): 100 dB (Typ), 86 dB (Min) (-12.5V ≤ V_CM ≤ 11.5V)
Features:
- Excellent sound quality
- Ultra-low distortion: 0.00008%
- Low noise: 8nV/√Hz
- True FET-input: I B = 5pA
- High speed:
- -Slew rate: 20V/μs
- -Bandwidth: 8MHz
- High open-loop gain: 120dB (2kΩ)
- Wide supply range: ±2.5V to ±18V
- Single, dual, and quad versions
Applications:
- Professional audio and music
- Line drivers
- Line receivers
- Multimedia audio
- Active filters
- Preamplifiers
- Integrators
- Crossover networks
Package:
- D (SOIC, 8)
- P (PDIP, 8)
- D (SOIC, 14)
Features
- Excellent sound quality
- Ultra-low distortion: 0.00008%
- Low noise: 8nV/√Hz
- True FET-input: I B = 5pA
- High speed:
- -Slew rate: 20V/μs
- -Bandwidth: 8MHz
- High open-loop gain: 120dB (2kΩ)
- Wide supply range: ±2.5V to ±18V
- Single, dual, and quad versions
Applications
- Professional audio and music
- Line drivers
- Line receivers
- Multimedia audio
- Active filters
- Preamplifiers
- Integrators
- Crossover networks
THD+Noise vs Frequency
THD+Noise vs Frequency
Pin Configuration
Figure 4-1. OPA134: D Package, 8-Pin SOIC, and P Package, 8-Pin PDIP (Top View)
Electrical Characteristics
at T A = 25°C, VS = ±15V, RL = 2kΩ connected to midsupply, and VCM = VOUT = midsupply (unless otherwise noted)
| PARAMETER | PARAMETER | TEST CONDITIONS | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|---|
| AUDIO PERFORMANCE | AUDIO PERFORMANCE | AUDIO PERFORMANCE | AUDIO PERFORMANCE | AUDIO PERFORMANCE | AUDIO PERFORMANCE | AUDIO PERFORMANCE | AUDIO PERFORMANCE |
| THD+N | Total harmonic distortion plus | f = 1kHz, G = 1, V O = 3V rms | R L = 2kΩ R L = 600Ω | 0.00008 | % | ||
| THD+N | noise Intermodulation distortion | f = 1kHz, G = 1, V | 1V PP | 0.00015 -98 | dB | ||
| THD+N | Headroom (1) | THD < 0.01%, R L = 2kΩ, V S = 18V | THD < 0.01%, R L = 2kΩ, V S = 18V | 21.3 | dBu | ||
| FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE |
| GBW | Gain bandwidth product | 8 | MHz | ||||
| SR | Slew rate (2) | ±20 | V/μs | ||||
| SR | Settling time | 10V step, G = 1, C L = 100pF | 0.1% 0.01% | 0.7 1 | μs | ||
| FPBW | Full power bandwidth | 1.3 | MHz | ||||
| FPBW | Overload recovery time | V IN × G = V S | V IN × G = V S | 0.6 | μs | ||
| NOISE | NOISE | NOISE | NOISE | NOISE | NOISE | NOISE | NOISE |
| Input voltage noise | f = 20Hz to 20kHz | f = 20Hz to 20kHz | 1.2 | μV rms | |||
| e n | Input voltage noise density | f = 1kHz | f = 1kHz | 8 | nV/√Hz | ||
| I n | Input current noise density | f = 1kHz | f = 1kHz | 3 | fA/√Hz | ||
| OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE |
| V OS | Input offset voltage | T = -40°C to +85°C | T = -40°C to +85°C | ±1 ±1 | ±3.5 | mV | |
| dV OS /dT | Input offset voltage drift | T A = -40°C to +85°C | T A = -40°C to +85°C | ±2 | μV/°C | ||
| PSRR | Power-supply rejection ratio | 5V ≤ V S ≤ 36V DC, R L = 2kΩ | 5V ≤ V S ≤ 36V DC, R L = 2kΩ | 90 | 106 128 | dB | |
| Channel separation (dual, quad) | f = 20kHz, R L = 2kΩ | f = 20kHz, R L = 2kΩ | 126 | dB | |||
| INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT ±5 | INPUT BIAS CURRENT ±100 | INPUT BIAS CURRENT pA |
| I B | Input bias current (3) | T A = -40°C to +85°C | T A = -40°C to +85°C | See Section 5.8 | ±5 | nA | |
| I OS | Input offset current (3) | ±2 | ±50 | pA | |||
| INPUT VOLTAGE | INPUT VOLTAGE | INPUT VOLTAGE | INPUT VOLTAGE | INPUT VOLTAGE | INPUT VOLTAGE | INPUT VOLTAGE | INPUT VOLTAGE |
| V CM | Common-mode voltage | (V-) + 2.5 | ±13 | (V+) - 3.5 | V | ||
| CMRR | Common-mode rejection ratio | -12.5V ≤ V ≤ 11.5V | -12.5V ≤ V ≤ 11.5V | 86 | 100 | dB | |
| CM TA = -40°C to +85°C 90 INPUT IMPEDANCE | CM TA = -40°C to +85°C 90 INPUT IMPEDANCE Differential | CM TA = -40°C to +85°C 90 INPUT IMPEDANCE | CM TA = -40°C to +85°C 90 INPUT IMPEDANCE | CM TA = -40°C to +85°C 90 INPUT IMPEDANCE | CM TA = -40°C to +85°C 90 INPUT IMPEDANCE 10 13 || 8 | CM TA = -40°C to +85°C 90 INPUT IMPEDANCE | CM TA = -40°C to +85°C 90 INPUT IMPEDANCE Ω || pF |
| Common-mode | -12.5V ≤ V CM ≤ 11.5V | -12.5V ≤ V CM ≤ 11.5V | 10 13 || 6 | Ω || pF | |||
| OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN |
| A | Open-loop voltage gain | R L = 10kΩ, -14.5V ≤ V O ≤ 13.8V | R L = 10kΩ, -14.5V ≤ V O ≤ 13.8V | 104 | 120 | dB | |
| OL | R L = 2kΩ, -13.8V ≤ V O ≤ 13.5V | R L = 2kΩ, -13.8V ≤ V O ≤ 13.5V | 104 | 120 |
Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V S | Supply voltage, (V+) - (V-) | Single supply | 36 | V | |
| Input voltage (2) | (V-) - 0.5 | (V+) + 0.5 | V | ||
| Input current (2) | ±10 | mA | |||
| I SC | Output short-circuit (3) | Continuous | Continuous | ||
| T A | Operating temperature | -40 | 125 | °C | |
| T J | Junction temperature | 150 | °C | ||
| T stg | Storage temperature | -55 | 125 | °C |
Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
| MIN | NOM | MAX | UNIT | |||
|---|---|---|---|---|---|---|
| V S | Supply voltage, (V+) - (V-) | Dual supply | ±2.5 | ±15 | ±18 | V |
| V S | Single supply | 5 | 30 | 36 | V | |
| T A | Ambient temperature | -40 | +85 | °C |
Thermal Information
| OPA134 | OPA134 | ||
|---|---|---|---|
| THERMAL METRIC (1) | THERMAL METRIC (1) | D (SOIC) | P (PDIP) |
| 8 PINS | 8 PINS | ||
| R θJA | Junction-to-ambient thermal resistance | 160 | 73 |
| R θJC(top) | Junction-to-case (top) thermal resistance | 75 | 50 |
| R θJB | Junction-to-board thermal resistance | 60 | 36 |
| Ψ JT | Junction-to-top characterization parameter | 9 | 17 |
| Ψ JB | Junction-to-board characterization parameter | 50 | 35 |
| R θJC(bot) | Junction-to-case (bottom) thermal resistance | N/A | N/A |
Typical Application
The OPAx134 series operational amplifiers are unity-gain stable, and an excellent choice for a wide range of audio and general-purpose applications. All circuitry is independent in the dual version, maintaining normal behavior when one amplifier in a package is overdriven or short-circuited. Bypass the power supply pins with 10nF ceramic capacitors or larger to minimize power supply noise.
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| OPA2134 | Texas Instruments | — |
| OPA2134PA | Texas Instruments | — |
| OPA2134PA.A | Texas Instruments | — |
| OPA2134PAG4 | Texas Instruments | — |
| OPA2134UA | Texas Instruments | — |
| OPA2134UA.B | Texas Instruments | — |
| OPA2134UA/2K5 | Texas Instruments | — |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free