NTP53121G0JHK

Part: NTP53121G0JHKZ — NXP Semiconductors

Type: NFC Forum-Compliant I2C Bridge / NFC Forum Type 5 Tag IC

Description: 13.56 MHz NFC Forum Type 5 Tag and ISO/IEC 15693 bridge IC with 2048 bytes EEPROM, 256 bytes SRAM, I2C interface, and energy harvesting capability with a 1.62 V to 5.5 V supply range.

Operating Conditions:

• Supply voltage: 1.62 to 5.5 V
• Operating temperature: -40 to 85 °C (for EEPROM write access; -40 to 105 °C for EEPROM read, SRAM, and register access)
• Operating frequency: 13.56 MHz

Absolute Maximum Ratings:

• Max supply voltage: 7.15 V (on pin VCC)
• Max junction/storage temperature: 150 °C (storage temperature)

Key Specs:

• Storage temperature (Tstg): -65 to 150 °C
• Max junction temperature (Tj, EEPROM write operation): 95 °C
• Max junction temperature (Tj, EEPROM read, SRAM and register operation): 115 °C
• Input voltage (Vi, SDA, SCL, ED, HPD pins): -0.5 to 7.15 V
• RF input voltage (VI(RF), on pins LA/LB): -0.5 to 5.2 Vp
• Maximum input current (Ii(max), LA/LB peak): -168 to 168 mA
• Electrostatic discharge voltage (HBM): -2 to 2 kV
• Electrostatic discharge voltage (CDM): -2 to 2 kV

Features:

• ISO/IEC 15693 and NFC Forum Type 5 Tag compliant contactless interface
• 2048 bytes (16384 bits) user EEPROM with 40-year data retention and 1,000,000 cycle write endurance
• 256 bytes SRAM for fast pass-through mode
• I2C slave interface supporting standard (100 kHz) and fast (400 kHz) modes
• Energy harvesting with configurable output voltage supplying up to 30 mW
• 64-bit Unique Identifier (UID)
• Low-power standby current typically <6 μA, hard power-down current typically <0.25 μA
• Configurable event detection (ED) pin, 2 GPIOs, and 2 PWM channels

Applications:

• Dynamic secure pairing
• Sensor data acquisition and commissioning
• Lighting and LED driver configuration
• Smart home and smart metering
• Wearables and hearables
• Industrial and consumer devices

Package:

• XQFN16 (16 pins)
• TSSOP16 (16 pins)
• SO8 (8 pins)
• Wafer

• Reading distance with long-range reader > 60 cm (> 25 inches)
• Zero-power readout of an I 2 C sensor
• Adjustable security levels up to mutual AES authentication (NTP5332 only)
• Flexible split between three open and/or protected memory areas
• Ensured authenticity of product through value chain
• Interoperable data exchange according to NFC Forum standards
• Energy-efficient design with reduced bill of material
• Interoperable and high performance NFC interface
• -ISO/IEC 15693 and NFC Forum Type 5 Tag compliant
• -64-bit Unique IDentifier
• Reliable and robust memory
• -2048 bytes (16384 bits) user EEPROM on top of configuration memory
• -256 bytes (2048 bits) SRAM for frequently changing data and pass-through mode
• -40 years data retention
• -Write endurance of 1 000 000 cycles
• Configurable contact interface
• -I 2 C slave standard (100 kHz) and fast (400 kHz) mode
• -NTP5332 offers a Transparent I 2 C master channel (for example, read sensors without an MCU)
• -One configurable event detection pin
• -Two GPIOs as multiplexed I 2 C lines
• -Two Pulse Width Modulation (PWM) channels as multiplexed GPIOs and/or ED pin
• -1.62 V to 5.5 V supply voltage
• Scalable security for access and data protection
• -Disable NFC interface temporarily
• -Disable I 2 C interface temporarily
• -NFC PRIVACY mode
• -Read-only protection as defined in NFC Forum Type 5 Tag Specification
• -Full, read-only, or no memory access based on 32-bit password from both interfaces
• -Optional 64-bit password protection from NFC perspective
• -128-bit AES authentication as defined in ISO/IEC 15693 for NTP5332
• -ECC-based reprogrammable originality signature
• Multiple fast data transfer mode
• -Pass-through mode with 256 byte SRAM buffer
• -Standardized data transfer mode (PHDC, TNEP)
• Low-power budget application support
• -Energy harvesting with configurable output voltage up to 30 mW
• -Low-power standby current typically <6 μA
• -Hard power down current typically <0.25 μA
• Very robust architecture
• --40 °C to 105 °C for EEPROM read, SRAM and register access
• --40 °C to 85 °C for EEPROM write access
• Extensive product support package
• -Feature specific application notes
• -Development board including software and source code

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2020. All rights reserved.

-Hands-on training

NTP53x2

NTAG 5 link - NFC Forum-compliant I 2 C bridge

• Use cases
• -Simple dynamic secure pairing
• -Commissioning
• -Parameterization
• -Diagnosis
• -Firmware download
• -Low BoM and low-power data acquisition for sensors
• -Calibration
• -Trimming
• -Authenticity check and data protection
• -Late "in the box" configuration
• -LED driver configuration
• -NFC charging
• Applications
• -Lighting
• -Smart home
• -Hearable and Wearable
• -Consumer
• -Industrial
• -Gaming
• -Smart sensor
• -Smart metering

NTAG 5 link - NFC Forum-compliant I 2 C bridge

• 1 16

2

15

3

14

4

13

5

12

• 6 11

• 7 10

8

9

aaa-034214

Figure 4. Pin configuration for TSSOP16 package

Figure 15. Package outline XQFN16

Figure 15. Package outline XQFN16

NTAG 5 link - NFC Forum-compliant I 2 C bridge

Figure 16. Package outline TSSOP16

Figure 17. Package outline SO8