MCP1700T-1202E/MAY

Part: MCP1700 from Microchip Technology Inc.

Type: CMOS Low Dropout (LDO) Voltage Regulator

Key Specs:

• Quiescent Current: 1.6 μA Typical
• Input Operating Voltage Range: 2.3V to 6.0V
• Output Voltage Range: 1.2V to 5.0V
• Maximum Output Current: 250 mA (for VOUT ≥ 2.5V)
• Maximum Output Current: 200 mA (for VOUT < 2.5V)
• Dropout Voltage: 178 mV Typical @ 250 mA for VOUT = 2.8V
• Output Voltage Tolerance: 0.4% Typical

Features:

• AEC-Q100 Qualified and PPAP Capable
• Low Dropout (LDO) Voltage
• Standard Output Voltage Options: 1.2V, 1.8V, 2.5V, 2.8V, 2.9V, 3.0V, 3.3V, 5.0V
• Stable with 1.0 μF Ceramic Output Capacitor
• Short Circuit Protection
• Overtemperature Protection

Applications:

• Battery-Powered Devices
• Battery-Powered Alarm Circuits
• Smoke Detectors
• CO2 Detectors
• Pagers and Cellular Phones
• Smart Battery Packs
• Low Quiescent Current Voltage Reference
• PDAs
• Digital Cameras
• Microcontroller Power

Package:

• SOT-23
• SOT-89
• TO-92
• 2x2 DFN-6

• AEC-Q100 Qualified and PPAP Capable
• 1.6 μA Typical Quiescent Current
• Input Operating Voltage Range: 2.3V to 6.0V
• Output Voltage Range: 1.2V to 5.0V
• 250 mA Output Current for Output Voltages 2.5V
• 200 mA Output Current for Output Voltages < 2.5V
• Low Dropout (LDO) Voltage
  • 178 mV Typical @ 250 mA for VOUT = 2.8V
• 0.4% Typical Output Voltage Tolerance
• Standard Output Voltage Options:
• 1.2V, 1.8V, 2.5V, 2.8V, 2.9V, 3.0V, 3.3V, 5.0V
• Stable with 1.0 μF Ceramic Output Capacitor
• Short Circuit Protection
• Overtemperature Protection

• Battery-Powered Devices
• Battery-Powered Alarm Circuits
• Smoke Detectors
• CO2 Detectors
• Pagers and Cellular Phones
• Smart Battery Packs
• Low Quiescent Current Voltage Reference
• PDAs
• Digital Cameras
• Microcontroller Power

The descriptions of the pins are listed in Table 3-1.

TABLE 3-1: PIN FUNCTION TABLE

3.1 Ground Terminal (GND)

Regulator ground. Tie GND to the negative side of the output and the negative side of the input capacitor. Only the LDO bias current (1.6 μA typical) flows out of this pin; there is no high current. The LDO output regulation is referenced to this pin. Minimize voltage drops between this pin and the negative side of the load.

Absolute Maximum Ratings †

• All inputs and outputs w.r.t. (VSS
• Peak Output Current Internally Limited
• Storage Temperature -65°C to +150°C
• Maximum Junction Temperature 150°C
• Operating Junction Temperature-40°C to +125°C
• ESD protection on all pins (HBM;MM)  4 kV;  400V

• All inputs and outputs w.r.t. (VSS
• Peak Output Current Internally Limited
• Storage Temperature -65°C to +150°C
• Maximum Junction Temperature 150°C
• Operating Junction Temperature-40°C to +125°C
• ESD protection on all pins (HBM;MM)  4 kV;  400V

There is an internal electrical connection between the Exposed Thermal Pad (EP) and the GND pin; they must be connected to the same potential on the Printed Circuit Board (PCB).