Skip to main content

LTC3105EDD#TRPBF

Step-Up DC/DC Converter

The LTC3105EDD#TRPBF is a step-up dc/dc converter from Analog Devices Inc.. View the full LTC3105EDD#TRPBF datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

Manufacturer

Analog Devices Inc.

Category

Step-Up DC/DC Converter

Package

10-WFDFN Exposed Pad

Lifecycle

Active

Key Specifications

ParameterValue
ApplicationsConverter, Energy Harvesting
Mounting TypeSurface Mount
Number of Outputs1
Operating Temperature-40°C ~ 85°C
Package / Case10-WFDFN Exposed Pad
PackagingMouseReel
PackagingMouseReel
PackagingMouseReel
Standard Pack Qty2500
Standard Pack Qty2500
Standard Pack Qty2500
Supplier Device Package10-DFN (3x3)
Supplier Device Package10-DFN (3x3)
Supplier Device Package10-DFN (3x3)
Supplier Device Package10-DFN (3x3)
Supplier Device Package10-DFN (3x3)
Input Voltage Range0.23V ~ 5V
Voltage - Output1.5V ~ 5.25V
Voltage - Output1.5V ~ 5.25V
Voltage - Output1.5V ~ 5.25V
Voltage - Output1.5V ~ 5.25V
Voltage - Output1.5V ~ 5.25V

Overview

Part: LTC3105 — Linear Technology Corporation

Type: High Efficiency Step-Up DC/DC Converter

Description: A high efficiency step-up DC/DC converter with 250mV start-up capability, integrated maximum power point controller (MPPC), and an auxiliary 6mA LDO regulator, operating from input voltages as low as 225mV.

Operating Conditions:

  • Supply voltage: 0.225–5 V
  • Operating junction temperature: -40 to 85 °C
  • Output voltage adjust range: 1.5–5.25 V
  • LDO output adjust range: 1.4–5 V

Absolute Maximum Ratings:

  • Max SW voltage: 6 V (DC), 7 V (pulsed <100ns)
  • Max voltage, all other pins: 6 V
  • Max junction temperature: 125 °C
  • Storage temperature: -65 to 150 °C

Key Specs:

  • Input Start-Up Voltage: 0.25 V (typ), 0.4 V (max) at Tj = 0°C to 85°C
  • VOUT IQ in Operation: 24 μA (typ) at VFB = 1.10V
  • VOUT IQ in Shutdown: 10 μA (typ) at SHDN = 0V
  • N-Channel On-Resistance: SW to GND: 0.5 Ω (typ)
  • P-Channel On-Resistance: SW to VOUT: 0.5 Ω (typ)
  • Peak Current Limit: 0.5 A (typ) at VFB = 0.90V, VMPPC = 0.4V
  • LDO Current Limit: 6 mA (min), 12 mA (typ) at V LDO 0.5V Below Regulation Voltage
  • LDO Dropout Voltage: 105 mV (typ) at I LDO = 6mA, V OUT = V AUX = 2.2V

Features:

  • Low Start-Up Voltage: 250mV
  • Maximum Power Point Control
  • Wide VIN Range: 225mV to 5V
  • Auxiliary 6mA LDO Regulator
  • Burst Mode Operation: IQ = 24μA
  • Output Disconnect and Inrush Current Limiting
  • VIN > VOUT Operation
  • Antiringing Control
  • Soft Start
  • Automatic Power Adjust
  • Power Good Indicator

Applications:

  • Solar Powered Battery/Supercapacitor Chargers
  • Energy Harvesting
  • Remote Industrial Sensors
  • Low Power Wireless Transmitters
  • Cell Phone, MP3, PMP and GPS Accessory Chargers

Package:

  • 10-Lead (3mm × 3mm × 0.75mm) Plastic DFN
  • 12-Lead Plastic MSOP

Features

  • n Low Start-Up Voltage: 250mV
  • n Maximum Power Point Control
  • n Wide V IN Range: 225mV to 5V
  • n Auxiliary 6mA LDO Regulator
  • n Burst Mode ® Operation: I Q = 24μA
  • n Output Disconnect and Inrush Current Limiting
  • n VIN > V OUT Operation
  • n Antiringing Control
  • n Soft Start
  • n Automatic Power Adjust
  • n Power Good Indicator
  • n 10-Lead 3mm × 3mm × 0.75mm DFN and 12-Lead MSOP Packages

Applications

  • n Solar Powered Battery/Supercapacitor Chargers
  • n Energy Harvesting
  • n Remote Industrial Sensors
  • n Low Power Wireless T ransmitters
  • n Cell Phone, MP3, PMP and GPS Accessory Chargers

Pin Configuration

Electrical Characteristics

The l denotes the specifications which apply over the full operating junction temperature range, otherwise specifications are at T A = 25°C (Note 2). V AUX = V OUT = 3.3V , V LDO = 2.2V , V IN = 0.6V , unless otherwise noted.

PARAMETERCONDITIONSMINTYPMAXUNITS
Step-Up Converter
Input Operating Voltagel0.2255V
Input Start-Up Voltage(Note 5) T J = 0°C to 85°C (Note 5)l0.250.4 0.36V V
Output Voltage Adjust Rangel1.55.25V
Feedback Voltage (FB Pin)l0.9841.0041.024V
V OUT I Q in OperationV FB = 1.10V24μA
V OUT I Q in ShutdownSHDN = 0V10μA
MPPC Pin Output CurrentV MPPC = 0.6V9.721010.28μA
SHDN Input Logic High Voltagel1.1V
SHDN Input Logic Low Voltagel0.3V
N-Channel SW Pin Leakage CurrentV IN = V SW = 5V , V SHDN = 0V110μA
P-Channel SW Pin Leakage CurrentV IN = V SW = 0V , V OUT = V AUX = 5.25V110μA
N-Channel On-Resistance: SW to GND0.5Ω
P-Channel On-Resistance: SW to V OUT0.5Ω
Peak Current LimitV FB = 0.90V , V MPPC = 0.4V (Note 3)0.40.5A
Valley Current LimitV FB = 0.90V , V MPPC = 0.4V (Note 3)0.2750.35A
PGOOD Threshold (% of Feedback Voltage)V OUT Falling859095%
LDO Regulator
LDO Output Adjust RangeExternal Feedback Network, V AUX > V LDOl1.45V
LDO Output VoltageV FBLDO = 0Vl2.1482.22.236V
Feedback Voltage (FBLDO Pin)External Feedback Networkl0.9841.0041.024V
Load RegulationI LDO = 1mA to 6mA0.4%
Line RegulationV AUX = 2.5V to 5V0.15%
Dropout VoltageI LDO = 6mA, V OUT = V AUX = 2.2V105mV
LDO Current LimitV LDO 0.5V Below Regulation Voltagel612mA
LDO Reverse-Blocking Leakage CurrentV IN = V AUX = V OUT = 0V , V SHDN = 0V1μA

Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime.

Note 2: The LTC3105 is tested under pulsed load conditions such that T J ≈ T A . The L TC3105E is guaranteed to meet specifications from 0°C to 85°C junction temperature. Specifications over the -40°C to 85°C operating junction temperature range are assured by design, characterization and correlation with statistical process controls. Note that the maximum ambient temperature consistent with these specifications is determined by specific operating conditions in conjunction with board layout, the rated package thermal impedance and other environmental factors.

Note 3: Current measurements are performed when the LTC3105 is not switching. The current limit values measured in operation will be somewhat higher due to the propagation delay of the comparators.

Note 4: This IC includes over temperature protection that is intended to protect the device during momentary overload conditions. Junction temperature will exceed 125°C when overtemperature protection is active. Continuous operation above the specified maximum operating junction temperature may impair device reliability.

Note 5: The LTC3105 has been optimized for use with high impedance power sources such as photovoltaic cells and thermoelectric generators. The input start-up voltage is measured using an input voltage source with a series resistance of approximately 200mΩ and MPPC enabled. Use of the LTC3105 with lower resistance voltage sources or with MPPC disabled may result in a higher input start-up voltage.

3105fa

Absolute Maximum Ratings

SW VoltageDC............................................................ -0.3V to 6V
Pulsed (<100ns)...........................................-1Vto 7V
Voltage, All Other Pins .................................-0.3V to 6V
Operating Junction Temperatureto 85°C
Range (Note 2).........................................-40°C

Related Variants

The following components are covered by the same datasheet.

Part NumberManufacturerPackage
LTC3105Linear Technology Corporation10-Lead (3mm × 3mm) Plastic DFN
LTC3105EDDLinear Technology Corporation
LTC3105EMSLinear Technology Corporation
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Get structured datasheet data via API

Get started free