LM358/LM2904
Dual Operational AmplifierThe LM358/LM2904 is a dual operational amplifier from Texas Instruments. View the full LM358/LM2904 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
LM358/LM2904 shares its datasheet with LM358DR2G, whose page lists every part number it covers.
Official LM358/LM2904 datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Operational AmplifiersLM358/LM2904 Key Specifications
| Parameter | Value |
|---|---|
| Packaging | Reel |
| Standard Pack Qty | 2500 |
| Number Of Channels | 2 |
| Supply Voltage (LM2904) | 3V to 26V |
| ESD (HBM, B/BA Versions) | 2000V |
| ESD (HBM, Legacy Versions) | 500V |
| Operating Temperature (LM358) | 0°C to 70°C |
| Supply Voltage (LM358/LM358A) | 3V to 30V |
| Operating Temperature (LM2904) | -40°C to 125°C |
| Supply Current (B/BA Versions) | 300µA per channel typical |
| Common-Mode Input Voltage Range | V- to V+ - 2V |
| Input Bias Current (LM358/LM2904) | 20nA typ / 250nA max |
| Input Offset Voltage (B Versions) | ±3mV max at 25°C |
| Input Bias Current (B/BA Versions) | 10nA typ / 35nA max |
| Input Offset Voltage (BA Versions) | ±2mV max at 25°C |
| Input Offset Voltage (LM358/LM2904) | ±7mV max at 25°C |
| Gain Bandwidth Product (B/BA Versions) | 1.2MHz |
| Supply Voltage (LM358B/BA, LM2904B/BA) | 3V to 36V |
| Gain Bandwidth Product (LM358/LM2904 Legacy) | 0.7MHz |
LM358/LM2904 Overview
Part: LM358DR2G (LM358 family: LM358B, LM358BA, LM2904B, LM2904BA, LM358, LM358A, LM2904, LM2904V, LM258, LM158 and variants) — Texas Instruments
Type: Dual Operational Amplifier
Description: Industry-standard dual op amp family; the LM358B/BA versions offer a 3–36 V supply, 300 μA/ch typical quiescent current, 1.2 MHz gain bandwidth and 3 mV (2 mV for BA) maximum offset voltage.
Operating Conditions:
- Supply voltage: 3–36 V (LM358B/BA); 3–30 V (LM358, LM358A, LM258, LM158); 3–26 V (LM2904)
- Operating temperature: 0 to 70 °C (LM358, LM358A); -40 to 85 °C (LM358B, LM358BA); grade-dependent, see Recommended Operating Conditions
- Common-mode voltage: V- to (V+) - 2 V
Absolute Maximum Ratings:
- Max supply voltage: ±20 V or 40 V (LM358B/BA, LM2904B/BA); ±16 V or 32 V (LM358, LM358A, LM258, LM158, LM2904V); ±13 V or 26 V (LM2904)
- Differential input voltage: ±32 V (±26 V for LM2904)
- Input voltage: -0.3 to 40 V (B/BA versions); -0.3 to 32 V (LM358, LM358A, LM258, LM158, LM2904V); -0.3 to 26 V (LM2904)
- Max operating virtual-junction temperature: 150 °C
- Storage temperature: -65 to 150 °C
- Output short circuit to ground: unlimited (TA ≤ 25 °C, VS ≤ 15 V)
- ESD: HBM ±2000 V, CDM ±1500 V (B/BA versions); HBM ±500 V, CDM ±1000 V (other versions)
Key Specs:
- Input offset voltage (LM358B, 25 °C): ±0.3 mV typ, ±3.0 mV max; LM358BA ±2.0 mV max
- Input offset voltage drift: ±3.5 μV/°C typ, 11 μV/°C max (-40 to 85 °C)
- Input bias current (LM358B/BA): -10 nA typ, -35 nA max at 25 °C
- Input offset current: 0.5 nA typ, 4 nA max
- Gain bandwidth product: 1.2 MHz typ; slew rate 0.5 V/μs (G = +1)
- Phase margin: 56° (G = +1, RL = 10 kΩ, CL = 20 pF)
- Input voltage noise density: 40 nV/√Hz at 1 kHz
- THD+N: 0.001% (G = +1, f = 1 kHz, VS = 36 V)
- Open-loop gain: 140 V/mV typ, 70 V/mV min (VS = 15 V, RL ≥ 10 kΩ)
- Quiescent current: 0.3 mA per channel typ (B/BA)
- Thermal resistance RθJA, D (SOIC-8): 124.7 °C/W
Features:
- Wide supply range of 3–36 V (B, BA versions)
- Common-mode input range includes ground
- Internal RF and EMI filter (B, BA versions)
- Unity-gain stable
- 2 kV HBM ESD (B, BA versions)
Applications:
- Server and network power supply units
- Multi-function printers
- Power supplies and mobile chargers
- Motor control
- Desktop PC and motherboard
- Air conditioners
- Washers, dryers and refrigerators
- AC inverters and drives
- Uninterruptible power supplies
- Electronic point-of-sale systems
Package:
- D (SOIC, 8): 4.9 mm × 6 mm
- PW (TSSOP, 8): 3 mm × 6.4 mm
- DGK (VSSOP, 8): 3 mm × 4.9 mm
- DDF (SOT-23, 8): 2.9 mm × 2.8 mm
- PS (SO, 8): 6.2 mm × 7.8 mm
- P (PDIP, 8): 9.81 mm × 9.43 mm
- JG (CDIP, 8): 9.6 mm × 6.67 mm
- FK (LCCC, 20): 8.89 mm × 8.89 mm
LM358/LM2904 Features
- Wide supply range of 3V to 36V (B, BA versions)
- Quiescent current: 300μA/ch (B, BA versions)
- Unity-gain bandwidth of 1.2MHz (B, BA versions)
- Common-mode input voltage range includes ground, enabling direct sensing near ground
- 2mV input offset voltage maximum at 25°C (BA version)
- 3mV input offset voltage maximum at 25°C (A, B versions)
- Internal RF and EMI filter (B, BA versions)
- On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
LM358/LM2904 Applications
- Merchant network and server power supply units
- Multi-function printers
- Power supplies and mobile chargers
- Motor control: AC induction, brushed DC, brushless DC, high-voltage, low-voltage, permanent magnet, and stepper motor
- Desktop PC and motherboard
- Indoor and outdoor air conditioners
- Washers, dryers, and refrigerators
- AC inverters, string inverters, central inverters, and voltage frequency drives
- Uninterruptible power supplies
- Electronic point-of-sale systems
LM358/LM2904 Pin Configuration
NC - No internal connection
Figure 4-2. FK Package 20-Pin LCCC Top View
Table 4-1. Pin Functions
| PIN - NAME | PIN - LCCC (1) | PIN - SOIC, SOT23-8, VSSOP, CDIP, PDIP, SO, TSSOP, CFP (1) | I/O | DESCRIPTION |
|---|---|---|---|---|
| IN1- | 5 | 2 | I | Negative input |
| IN1+ | 7 | 3 | I | Positive input |
| IN2- | 15 | 6 | I | Negative input |
| IN2+ | 12 | 5 | I | Positive input |
| OUT1 | 2 | 1 | O | Output |
| OUT2 | 17 | 7 | O | Output |
| V- | 10 | 4 | - | Negative (lowest) supply or ground (for single- supply operation) |
| NC | 1, 3, 4, 6, 8, 9, 11, 13, 14, 16, 18, 19 | - | - | No internal connection |
| V+ | 20 | 8 | - | Positive (highest) supply |
LM358/LM2904 Electrical Characteristics
VS = (V+) - (V-) = 5 V - 36 V (±2.5 V - ±18 V), T A = 25°C, V CM = V OUT = VS / 2, R L = 10k connected to VS / 2 (unless otherwise noted)
| PARAMETER | PARAMETER | TEST CONDITIONS | TEST CONDITIONS | MIN | TYP MAX | UNIT | ||
|---|---|---|---|---|---|---|---|---|
| OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE | OFFSET VOLTAGE ±0.3 | OFFSET VOLTAGE ±3.0 | OFFSET VOLTAGE mV |
| V OS | Input offset voltage | LM358B | LM358B | T A = -40°C to +85°C | ±4 | mV | ||
| V OS | LM358BA | LM358BA | T A = -40°C to +85°C | ±2.0 ±2.5 | mV mV | |||
| dV OS /d | Input offset voltage drift | T A = -40°C to +85°C (1) | ±3.5 | 11 | μV/°C | |||
| PSRR | Power supply rejection ratio | ±2 | 15 | μV/V | ||||
| Channel separation, dc | f = 1 kHz to 20 kHz | f = 1 kHz to 20 kHz | ±1 | μV/V | ||||
| INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE | INPUT VOLTAGE RANGE |
| V CM | Common-mode voltage range | V S = 3 V to 36 V | V S = 3 V to 36 V | (V-) | (V+) - 1.5 | V | ||
| V S = 5 V to 36 V | V S = 5 V to 36 V | T A = -40°C to +85°C | (V-) | (V+) - 2 | V | |||
| Common-mode rejection ratio | (V-) ≤ V CM ≤ (V+) - 1.5 V V S = 3 V to 36 V | (V-) ≤ V CM ≤ (V+) - 1.5 V V S = 3 V to 36 V | 20 | 100 | ||||
| CMRR | (V-) ≤ V CM ≤ (V+) - 2.0 V | V S = 5 V to 36 V | T A = -40°C to +85°C | 25 | 316 | μV/V | ||
| INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT | INPUT BIAS CURRENT |
| I B | Input bias current | T A = -40°C to +85°C (1) | -10 | -35 -50 | nA nA | |||
| I OS | Input offset current | T A = -40°C to +85°C (1) | 0.5 | 4 5 | nA nA | |||
| dI OS /d T | Input offset current drift | T A = -40°C to +85°C | 10 | pA/ °C | ||||
| NOISE | NOISE | NOISE | NOISE | NOISE | NOISE | NOISE | NOISE | NOISE |
| E n | Input voltage noise | f = 0.1 to 10 Hz | f = 0.1 to 10 Hz | 3 | μV PP | |||
| e n | Input voltage noise density | f = 1 kHz | f = 1 kHz | 40 | nV/√/Hz | |||
| INPUT IMPEDANCE | INPUT IMPEDANCE | INPUT IMPEDANCE | INPUT IMPEDANCE | INPUT IMPEDANCE | INPUT IMPEDANCE | INPUT IMPEDANCE | INPUT IMPEDANCE | INPUT IMPEDANCE |
| Z ID | Differential | 10 || 0.1 | MΩ|| pF | |||||
| Z IC | Common-mode | 4 || 1.5 | GΩ|| pF | |||||
| OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN | OPEN-LOOP GAIN |
| A | Open-loop voltage | = 15 V; V = 1 V to 11 V; R ≥ 10 kΩ, connected to (V-) | = 15 V; V = 1 V to 11 V; R ≥ 10 kΩ, connected to (V-) | 70 | 140 | V/mV | ||
| OL | gain | V S O L | V S O L | T A = -40°C to +85°C | 35 | V/mV | ||
| FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE | FREQUENCY RESPONSE |
| GBW | Gain bandwidth product | 1.2 | MHz | |||||
| SR | Slew rate | G = + 1 | G = + 1 | 0.5 | V/μs | |||
| Θ m | Phase margin | G = + 1, R L = 10kΩ, C L = 20 pF | G = + 1, R L = 10kΩ, C L = 20 pF | 56 | ° | |||
| t OR | Overload recovery time | V IN × gain > V S | V IN × gain > V S | 10 | μs | |||
| t s | Settling time | To 0.1%, V S = 5 V, 2-V step , G = +1, C L = 100 pF | To 0.1%, V S = 5 V, 2-V step , G = +1, C L = 100 pF | 4 | μs | |||
| THD+N | Total harmonic distortion + noise | G = + 1, f = 1 kHz, V O = 3.53 V RMS , V S = 36 V, R L = 100k, I OUT ≤ ±50 μA, BW = 80 kHz | G = + 1, f = 1 kHz, V O = 3.53 V RMS , V S = 36 V, R L = 100k, I OUT ≤ ±50 μA, BW = 80 kHz | G = + 1, f = 1 kHz, V O = 3.53 V RMS , V S = 36 V, R L = 100k, I OUT ≤ ±50 μA, BW = 80 kHz | 0.001 | % | ||
| OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT |
| V O | I OUT = 50 μA | 1.35 | 1.42 | V | ||||
| Positive rail (V+) | Positive rail (V+) | I OUT = 1 mA I OUT = 5 mA (1) | 1.4 1.5 | 1.48 1.61 | V V | |||
| Voltage output swing from rail | I OUT = 50 μA | 100 | 150 | mV | ||||
| Negative rail (V-) | Negative rail (V-) | I OUT = 1 mA | 0.75 | 1 | V | |||
| V S = 5 V, RL ≤ 10 kΩ connected to (V-) V S = 15 V; V O = V-; V ID = 1 V | V S = 5 V, RL ≤ 10 kΩ connected to (V-) Source (1) | T A = -40°C to +85°C | -20 -10 | 5 -30 | 20 | mV | ||
| I O | Output current | V = 15 V; V = V+; | T A = -40°C to +85°C | 10 | 20 | mA | ||
| S O V ID = -1 V | Sink (1) | T A = -40°C to +85°C | 5 | μA | ||||
| I SC | Short-circuit current | V ID = -1 V; V O = (V-) + 200 mV | V ID = -1 V; V O = (V-) + 200 mV | V ID = -1 V; V O = (V-) + 200 mV | 60 | 100 ±40 | ±60 | mA |
| C LOAD | Capacitive load drive | V S = 20 V, (V+) = 10 V, (V-) = -10 V, V O = 0 V | V S = 20 V, (V+) = 10 V, (V-) = -10 V, V O = 0 V | V S = 20 V, (V+) = 10 V, (V-) = -10 V, V O = 0 V | 100 | pF | ||
| R O | Open-loop output resistance | f = 1 MHz, I O = 0 A | f = 1 MHz, I O = 0 A | f = 1 MHz, I O = 0 A | 300 | Ω |
LM358/LM2904 Absolute Maximum Ratings
over operating ambient temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| LM358B, LM358BA, LM2904B, LM2904BA | ±20 or 40 | V | |||
| Supply voltage, V S = ([V+] - [V-]) | LM158, LM258, LM358, LM158A, LM258A, LM358A, LM2904V | ±16 or 32 | V | ||
| LM2904 | ±13 or 26 | V | |||
| Differential input voltage, V ID (2) | LM358B, LM358BA, LM2904B, LM2904BA,LM158, LM258, LM358, LM158A, LM258A, LM358A, LM2904V | -32 | 32 | V | |
| LM2904 | -26 | 26 | V | ||
| Input voltage, V I | LM358B, LM358BA, LM2904B, LM2904BA | -0.3 | 40 | V | |
| Input voltage, V I | Either input | LM158, LM258, LM358, LM158A, LM258A, LM358A, LM2904V | -0.3 | 32 | V |
| Input voltage, V I | LM2904 | -0.3 | 26 | V | |
| Duration of output short circuit (one amplifier) to ground at (or below) T A = 25°C, V S ≤ 15 V (3) | Duration of output short circuit (one amplifier) to ground at (or below) T A = 25°C, V S ≤ 15 V (3) | Duration of output short circuit (one amplifier) to ground at (or below) T A = 25°C, V S ≤ 15 V (3) | Unlimited | s | |
| Operating ambient temperature, T A | LM158, LM158A | -55 | 125 | °C | |
| Operating ambient temperature, T A | LM258, LM258A | -25 | 85 | °C | |
| LM358B, LM358BA | -40 | 85 | °C | ||
| LM358, LM358A | 0 | 70 | °C | ||
| LM2904B, LM2904BA, LM2904, LM2904V | -40 | 125 | °C | ||
| Operating virtual-junction temperature, T J | Operating virtual-junction temperature, T J | Operating virtual-junction temperature, T J | 150 | °C | |
| Storage temperature, T stg | Storage temperature, T stg | Storage temperature, T stg | -65 | 150 | °C |
LM358/LM2904 Recommended Operating Conditions
over operating ambient temperature range (unless otherwise noted)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| V S | Supply voltage, V = ([V+] - [V-]) | LM358B, LM358BA, LM2904B, LM2904BA | 3 | 36 | V |
| V S | S | LM158, LM258, LM358, LM158A, LM258A, LM358A, LM2904V | 3 | 30 | V |
| V S | LM2904 | 3 | 26 | V | |
| V CM | Common-mode voltage | V- | V+ - 2 | V | |
| T A | LM358B, LM358BA | -40 | 85 | °C | |
| T A | LM2904B, LM2904BA, LM2904, LM2904V | -40 | 125 | °C | |
| T A | Operating ambient temperature | LM358, LM358A | 0 | 70 | °C |
| T A | LM258, LM258A | -20 | 85 | °C | |
| T A | LM158, LM158A | -55 | 125 | °C |
LM358/LM2904 Thermal Information
| THERMAL METRIC (1) | LM258, LM258A, LM358, LM358A, LM358B, LM358BA, LM2904BA, LM2904V (2) - THERMAL METRIC (1) | LM258, LM258A, LM358, LM358A, LM358B, LM358BA, LM2904BA, LM2904V (2) - D (SOIC) - 8 PINS | LM258, LM258A, LM358, LM358A, LM358B, LM358BA, LM2904BA, LM2904V (2) - DGK (VSSOP) - 8 PINS | LM258, LM258A, LM358, LM358A, LM358B, LM358BA, LM2904BA, LM2904V (2) - P (PDIP) - 8 PINS | LM258, LM258A, LM358, LM358A, LM358B, LM358BA, LM2904BA, LM2904V (2) - PS (SO) - 8 PINS | LM258, LM258A, LM358, LM358A, LM358B, LM358BA, LM2904BA, LM2904V (2) - PW (TSSOP) - 8 PINS | LM258, LM258A, LM358, LM358A, LM358B, LM358BA, LM2904BA, LM2904V (2) - DDF (SOT-23) - 8PINS | LM158, LM158A - FK (LCCC) - 20 PINS | LM158, LM158A - JG (CDIP) - 8 PINS | UNIT |
|---|---|---|---|---|---|---|---|---|---|---|
| R θJA | Junction-to-ambient thermal resistance | 124.7 | 181.4 | 80.9 | 116.9 | 171.7 | 164.3 | 84.0 | 112.4 | °C/W |
| R θJC(top) | Junction-to-case (top) thermal resistance | 66.9 | 69.4 | 70.4 | 62.5 | 68.8 | 98.1 | 56.9 | 63.6 | °C/W |
| R θJB | Junction-to-board thermal resistance | 67.9 | 102.9 | 57.4 | 68.6 | 99.2 | 82.1 | 57.5 | 100.3 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 19.2 | 11.8 | 40 | 21.9 | 11.5 | 11.4 | 51.7 | 35.7 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 67.2 | 101.2 | 56.9 | 67.6 | 97.9 | 81.7 | 57.1 | 93.3 | °C/W |
| R θJC(bot) | Junction-to-case (bottom) thermal resistance | - | - | - | - | - | - | 10.6 | 22.3 | °C/W |
SLOS068AB - JUNE 1976 - REVISED OCTOBER 2024
LM358/LM2904 Typical Application
The LMx58 and LM2904 operational amplifiers are useful in a wide range of signal conditioning applications. Inputs can be powered before VSfor flexibility in multiple supply circuits.
LM358/LM2904 Package Information
| PART NUMBER (1) | PACKAGE | PACKAGE SIZE (2) |
|---|---|---|
| LM358B, LM358BA, LM2904B, LM2904BA, LM358, LM358A, LM2904, LM2904V, LM258, LM258A | D (SOIC, 8) | 4.9mm × 6mm |
| LM358B, LM358BA, LM2904B, LM2904BA, LM358, LM358A, LM2904, LM2490V | PW (TSSOP, 8) | 3mm × 6.4mm |
| LM358B, LM358BA, LM2904B, LM2904BA, LM358, LM358A, LM2904, LM2904V, LM258, LM258A | DGK (VSSOP, 8) | 3mm × 4.9mm |
| LM358B, LM358BA, LM2904B, LM2904BA | DDF (SOT-23, 8) | 2.9mm × 2.8mm |
| LM358, LM2904 | PS (SO, 8) | 6.2mm × 7.8mm |
| LM358, LM2904, LM358A, LM258, LM258A | P (PDIP, 8) | 9.81mm × 9.43mm |
| LM158, LM158A | JG (CDIP, 8) | 9.6mm × 6.67mm |
| LM158, LM158A | FK (LCCC, 20) | 8.89mm × 8.89mm |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
Other Operational Amplifiers
- LM358 – onsemi, Dual Operational Amplifier
- NE5532 – Texas Instruments, Dual Operational Amplifier
- AD623A – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARMZ-REEL7 – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARZ-RL – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623B – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623BNZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier
All Operational Amplifiers datasheetsAll Texas Instruments datasheets (2,418)
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Ask your AI agent about the LM358/LM2904
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the LM358/LM2904 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.