LIS2DW12TR

Part: LIS2DW12

Type: 3-axis Accelerometer

Key Specs:

• Power consumption (power-down mode): 50 nA
• Power consumption (active low-power mode): below 1 μA
• Noise (low-power mode): down to 1.3 mg RMS
• Supply voltage: 1.62 V to 3.6 V
• Full scale: ±2g/±4g/±8g/±16g
• Output data rates: 1.6 Hz to 1600 Hz
• High shock survivability: 10000 g
• Operating temperature range: -40°C to +85°C

Features:

• Ultralow power consumption: 50 nA in power-down mode, below 1 μA in active low-power mode
• Very low noise: down to 1.3 mg RMS in low-power mode
• Multiple operating modes with multiple bandwidths
• Android stationary detection, motion detection
• Independent I/O supply
• High-speed I²C/SPI digital output interface
• Single data conversion on demand
• 16-bit data output
• Embedded temperature sensor
• Self-test
• 32-level FIFO
• 10000 g high shock survivability
• ECOPACK and RoHS compliant
• Dedicated internal engine for motion and acceleration detection (free-fall, wakeup, single/double-tap recognition, activity/inactivity, stationary/motion detection, portrait/landscape detection, and 6D/4D orientation)

Applications:

• Motion detection for wearables
• Gesture recognition and gaming
• Motion-activated functions and user interfaces
• Display orientation
• Tap/double-tap recognition
• Free-fall detection
• Smart power saving for handheld devices
• Hearing aids
• Portable healthcare devices
• Wireless sensor nodes
• Motion-enabled metering devices

Package:

• Small thin plastic, land grid array (LGA) package

• Ultralow power consumption: 50 nA in power-down mode, below 1 μA in active low-power mode
• Very low noise: down to 1.3 mg RMS in low-power mode
• Multiple operating modes with multiple bandwidths
• Android stationary detection, motion detection
• Supply voltage, 1.62 V to 3.6 V
• Independent I/O supply
• ±2g/±4g/±8g/±16g full scale
• High-speed I²C/SPI digital output interface
• Single data conversion on demand
• 16-bit data output
• Embedded temperature sensor
• Self-test
• 32-level FIFO
• 10000 g high shock survivability
• ECOPACK and RoHS compliant

• Motion detection for wearables
• Gesture recognition and gaming
• Motion-activated functions and user interfaces
• Display orientation
• Tap/double-tap recognition
• Free-fall detection
• Smart power saving for handheld devices
• Hearing aids
• Portable healthcare devices
• Wireless sensor nodes
• Motion-enabled metering devices

SELF TEST

1.1 Block diagram

Figure 1. Block diagram

CLOCK

32 Level FIFO

TRIMMING

CIRCUITS REFERENCE

2.1 Mechanical characteristics

@Vdd = 1.8 V, T = 25°C unless otherwise noted. The product is factory calibrated at 1.8 V. The operational power supply range is from 1.62 V to 3.6 V.

| Vdd_IO | Resistor value for SDO/SA0 and CS pins |

Table 3. Mechanical characteristics

1. Typical specifications are not guaranteed.

2. Noise density is the same for all ODRs. Low-noise setting enabled.

3. RMS noise is the same for all ODRs. Low-noise setting enabled.

4. Values after factory calibration test and trimming.

Stresses above those listed as "absolute maximum ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device under these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.

Table 9. Absolute maximum ratings

Note: Supply voltage on any pin should never exceed 4.8 V.

This device is sensitive to mechanical shock, improper handling can cause permanent damage to the part.

This device is sensitive to electrostatic discharge (ESD), improper handling can cause permanent damage to the part.