LCZ

Part: LCZ260 Series Type: Hall-effect Zero Speed Sensor

Description: A durable, cost-effective single Hall-effect zero speed sensor with a digital output, operating from 4.5 Vdc to 26 Vdc and capable of detecting frequencies from 0 Hz to 15 kHz.

Operating Conditions:

• Supply voltage: 4.5 Vdc to 26 Vdc
• Operating temperature: -40 °C to 125 °C
• Operating frequency: 0 Hz to 15 kHz

Absolute Maximum Ratings:

• Max supply voltage: 26 Vdc
• Max continuous current: 20 mA (supply current), 20 mA (output sinking)
• Max storage temperature: 125 °C

Key Specs:

• Supply current: Max 20 mA (load = infinity, Vcc = 26)
• Output sinking current: Max 20 mA (0.4 V max. short circuit protected)
• Voltage low: Max 0.4 V (at 30 mA max. sink)
• Output signal rise/fall time: Max 4.0 μs (880 Ohm, 20 pF)
• Output impedance: 4.7 kOhm to 5.3 kOhm
• Dielectric strength: 200 Vac (<2 mA leakage)
• Sealing: IP68
• Shock: 50 Gs, 11 ms

Features:

• Low cost
• Omni-directional sensor to target orientation
• Digital output
• Small size
• Low power consumption

Applications:

• Industrial process control
• Factory automation
• Rotary applications, such as pumps, rollers, mixers, fan speed measurement, transmission, spindles, gear reducer RPM and process speed
• Synchronization
• Generator set
• Compressor speed
• Dyno testing

Package:

• 9,5 mm [3/8 in] diameter, 50,8 mm [2.00 in] length (3/8-24UNF-2A thread)
• 9,5 mm [3/8 in] diameter, 76,2 mm [3.00 in] length (3/8-24UNF-2A thread)
• 15,9 mm [5/8 in] diameter, 50,8 mm [2.00 in] length (5/8-18UNF-2A thread)
• 15,9 mm [5/8 in] diameter, 76,2 mm [3.00 in] length (5/8-18UNF-2A thread)

• Low cost
• Omni-directional sensor to target orientation
• Digital output
• Small size
• Low power consumption

• Industrial process control
• Factory automation
• Rotary applications, such as pumps,
• rollers, mixers, fan speed measurement, transmission, spindles, gear reducer RPM and process speed