Part: ICS307-01/-02 — Integrated Device Technology Type: Serially Programmable Clock Source Description: Versatile serially programmable clock source generating frequencies from 6 to 200 MHz with a second configurable output, featuring a 3-wire serial interface and power-down tri-state mode.

Operating Conditions:

• Supply voltage: 3 to 5.5 V
• Operating temperature: 0 to +70 °C
• Input crystal frequency: 5–27 MHz
• Output frequency range: 6–200 MHz

Absolute Maximum Ratings:

• Max supply voltage: 7 V
• Max junction/storage temperature: +150 °C

Key Specs:

• Operating Supply Current (Typ, 5V): 26 mA (20 MHz crystal, No load, 100 MHz out)
• Operating Supply Current (Typ, 3.3V): 13 mA (100 MHz out)
• Input Frequency (Crystal): 5 to 27 MHz
• Input Frequency (Clock): 2 to 50 MHz
• Output Frequency: 6 to 200 MHz
• Output High Voltage (VOH): 2.4 V (IOH = -25 mA)
• Output Low Voltage (VOL): 0.4 V (IOL = 25 mA)
• One Sigma Clock Period Jitter (Typ): 50 ps

Features:

• Packaged in 16-pin (150 mil wide) SOIC
• Highly accurate frequency generation
• Serially programmable via 3-wire interface
• Eliminates need for custom quartz
• Input crystal frequency of 5 - 27 MHz
• Output clock frequencies up to 200 MHz
• Power down tri-state mode
• Very low jitter
• Operating voltage of 3.3 V or 5 V
• 25 mA drive capability at TTL levels

Package:

• 16-pin SOIC

This product is intended for clock generation. It has low output jitter (variation in the output period), but input to output skew and jitter are not defined nor guaranteed. For applications which require defined input to output skew, use the ICS527-01.

ICS307-02LZT Pinout

Package: 16-pin SOIC (150 mil)

Notes

• Pin numbers extracted from the unordered pin assignment list in the datasheet. The source material did not include a formatted pin diagram; pin numbering was inferred from the explicit "pin number" labels in the list (e.g., "1 X1/ICLK", "16 X2").
• VDD and GND are power pins; all other non-NC pins are signal I/O.
• NC pins (2, 4, 7, 10, 14, 15) should be left unconnected.

VDD=3.3 V ±5% , Ambient temperature 0 to +70 ° C, unless stated otherwise

Stresses above the ratings listed below can cause permanent damage to the ICS307-01/-02. These ratings, which are standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range.

Package dimensions are kept current with JEDEC Publication No. 95