FS980R08A7F32BHPSA1
Si/SiC Fusion Power ModuleThe FS980R08A7F32BHPSA1 is a si/sic fusion power module from Infineon. View the full FS980R08A7F32BHPSA1 datasheet below including key specifications.
Official FS980R08A7F32BHPSA1 datasheet (PDF) — the source this page was extracted from.
Manufacturer
Infineon
Category
Si/SiC Fusion Power Module
Package
Module
Lifecycle
New Product
FS980R08A7F32BHPSA1 Key Specifications
| Parameter | Value |
|---|---|
| Configuration | Three Phase Inverter |
| Collector Current (Max) | 980 A |
| Current - Collector Cutoff (Max) | 42 µA |
| Input | Standard |
| Input Capacitance (Cies) @ Vce | 24000 pF @ 400 V |
| Mounting Type | Chassis Mount |
| NTC Thermistor | No |
| Operating Temperature | -40°C ~ 175°C |
| Package / Case | Module |
| Packaging | Tray |
| Standard Pack Qty | 6 |
| Vce(on) (Max) @ Vge, Ic | 1.33V @ 18V, 300A |
| Collector-Emitter Breakdown Voltage | 750 V |
FS980R08A7F32BHPSA1 Overview
Part: FS980R08A7F32B (HybridPACK™ Drive G2 module) — Infineon
Type: Automotive Si/SiC Fusion power module (IGBT/diode and SiC MOSFET, 6-switch inverter)
Description: 750 V HybridPACK Drive G2 module combining EDT3 IGBT/diode and CoolSiC Gen2 MOSFET (Fusion switch), 980 A implemented current, 1960 A repetitive peak current, Tvj,op up to 175 °C, with a direct-cooled PinFin baseplate.
Operating Conditions:
- Supply voltage: not applicable (power module, blocking voltage 750 V)
- Operating temperature (Tvj,op, continuous switching operation): -40 to 175 °C
- Continuous DC current (Fusion transistor): 600 A at Tf = 65 °C, Tvj,max = 175 °C
- Recommended gate voltage: VGE(on) 15...18 V, VGE(off) -5 V
Absolute Maximum Ratings:
- Blocking voltage VCES / VDSS / VRRM: 750 V (Tvj = 25 °C)
- Repetitive peak current (Fusion transistor) ICRM: 1960 A (verified by design, tp limited by Tvj,max)
- Gate-emitter voltage (Fusion transistor): -6/19 V static; -10/23 V transient (duty cycle < 1 %)
- Maximum RMS module terminal current: 800 A
- Storage temperature: -40 to 125 °C
Key Specs:
- Fusion transistor VCE,sat: 1.06 V typ (1.30 V max) at IC = 600 A, VGE = 18 V, Tvj = 25 °C; 1.25 V typ at 175 °C
- Fusion transistor switching energy (IC = 600 A, VCE = 400 V, RG = 1.5 Ω, Tvj = 175 °C): Eon 6.9 mJ, Eoff 31.6 mJ
- Fusion diode VF: 1.54 V typ (1.95 V max) at IF = 600 A, Tvj = 25 °C
- Fusion diode reverse recovery (IF = 600 A, Tvj = 175 °C): Qr 23.7 μC, Irm 350 A, Erec 8.42 mJ
- Fusion transistor short-circuit current ISC: 10000 A at Tvj = 25 °C and 6100 A at 175 °C (VCC = 470 V, tP = 1.5 μs)
- Inverter IGBT: VCE,sat 1.20 V typ (1.33 V max) at IC = 300 A, Tvj = 25 °C; Rth,j-f 0.156 K/W; ICRM 1150 A
- MOSFET: RDS,on 3.77 mΩ typ (5.15 mΩ max) at ID = 186 A, VGS = 18 V, Tvj = 25 °C; pulsed drain current 400 A
- Fusion diode Rth,j-f: 0.296 K/W (50% water / 50% ethylene glycol, 10 dm³/min, Tf = 65 °C)
- Module lead resistance: 0.60 mΩ per switch (Tf = 25 °C)
Features:
- Blocking voltage 750 V; implemented current 980 A, repetitive peak current 1960 A
- Fusion Switch: EDT3 IGBT/diode and CoolSiC Gen2 MOSFET
- Optimized for simultaneous gate drive
- High I²t robustness; low conduction and switching losses; low inductive design
- Integrated on-chip temperature sensor
- 4.25 kV DC 1 s insulation; high creepage and clearance distances (9.0 mm creepage, 4.5 mm clearance)
- Direct-cooled PinFin baseplate; Si3N4 ceramic
- Guiding elements for PCB and cooler assembly; PressFIT contact technology
- RoHS compliant, lead-free; UL 94 V0 module frame
- Qualified according to AQG 324
Applications:
- Automotive applications
- (Hybrid) electrical vehicles (H)EV
- Motor drives
- Commercial, construction and agricultural vehicles (CAV)
Package:
- HybridPACK Drive G2 module, PinFin direct-cooled baseplate (Cu+Ni), 760 g, PressFIT contacts
FS980R08A7F32BHPSA1 Features
- Electrical features
- -Blocking voltage 750 V
- -Implemented current 980 A / Repetitive peak current 1960 A
- -Fusion Switch - EDT3 IGBT/Diode & CoolSiC ™ Gen2 MOSFET
- -Optimized for simultaneous gate drive
- -High I2t robustness
- -Low conduction losses
- -Low switching losses
- -Low inductive design
- -Tvj,op = 175°C
- -Integrated on-chip temperature sensor
- Mechanical features
- -4.25 kV DC 1 second insulation
- -High creepage and clearance distances
- -Compact design
- -High power density
- -Direct-cooled PinFin base plate
- -High-performance Si3N4 ceramic
- -Guiding elements for PCB and cooler assembly
- -PressFIT contact technology
- -RoHS compliant, lead-free
- -UL 94 V0 module frame
FS980R08A7F32BHPSA1 Applications
-
Automotive applications -(Hybrid)electrical vehicles(H)EV
-
Motor drives
-
Commercial, construction and agricultural vehicles(CAV)## Product validation
-
Qualified according to AQG 324, release no.: 03.1/2021
FS980R08A7F32BHPSA1 Thermal Information
Tf = 65 °C, 50% water / 50% ethylene glycol
7 Characteristics diagrams
FS980R08A7F32BHPSA1 Package Information
Figure 2
9 Package outlines
Figure 3
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| FS980R08A7F32B | Infineon Technologies | — |
Ask your AI agent about the FS980R08A7F32BHPSA1
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the FS980R08A7F32BHPSA1 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.