FS980R08A7F32B
Si/SiC Fusion Power ModuleThe FS980R08A7F32B is a si/sic fusion power module from Infineon Technologies. View the full FS980R08A7F32B datasheet below including key specifications.
FS980R08A7F32B shares its datasheet with FS980R08A7F32BHPSA1, whose page lists every part number it covers.
Official FS980R08A7F32B datasheet (PDF) — the source this page was extracted from.
Manufacturer
Infineon TechnologiesCategory
Si/SiC Fusion Power Module
FS980R08A7F32B Key Specifications
| Parameter | Value |
|---|---|
| Configuration | Three Phase Inverter |
| Collector Current (Max) | 980 A |
| Current - Collector Cutoff (Max) | 42 µA |
| Input | Standard |
| Input Capacitance (Cies) @ Vce | 24000 pF @ 400 V |
| Mounting Type | Chassis Mount |
| NTC Thermistor | No |
| Operating Temperature | -40°C ~ 175°C |
| Package / Case | Module |
| Packaging | Tray |
| Standard Pack Qty | 6 |
| Vce(on) (Max) @ Vge, Ic | 1.33V @ 18V, 300A |
| Collector-Emitter Breakdown Voltage | 750 V |
FS980R08A7F32B Overview
Part: FS980R08A7F32B (HybridPACK™ Drive G2 module) — Infineon
Type: Automotive Si/SiC Fusion power module (IGBT/diode and SiC MOSFET, 6-switch inverter)
Description: 750 V HybridPACK Drive G2 module combining EDT3 IGBT/diode and CoolSiC Gen2 MOSFET (Fusion switch), 980 A implemented current, 1960 A repetitive peak current, Tvj,op up to 175 °C, with a direct-cooled PinFin baseplate.
Operating Conditions:
- Supply voltage: not applicable (power module, blocking voltage 750 V)
- Operating temperature (Tvj,op, continuous switching operation): -40 to 175 °C
- Continuous DC current (Fusion transistor): 600 A at Tf = 65 °C, Tvj,max = 175 °C
- Recommended gate voltage: VGE(on) 15...18 V, VGE(off) -5 V
Absolute Maximum Ratings:
- Blocking voltage VCES / VDSS / VRRM: 750 V (Tvj = 25 °C)
- Repetitive peak current (Fusion transistor) ICRM: 1960 A (verified by design, tp limited by Tvj,max)
- Gate-emitter voltage (Fusion transistor): -6/19 V static; -10/23 V transient (duty cycle < 1 %)
- Maximum RMS module terminal current: 800 A
- Storage temperature: -40 to 125 °C
Key Specs:
- Fusion transistor VCE,sat: 1.06 V typ (1.30 V max) at IC = 600 A, VGE = 18 V, Tvj = 25 °C; 1.25 V typ at 175 °C
- Fusion transistor switching energy (IC = 600 A, VCE = 400 V, RG = 1.5 Ω, Tvj = 175 °C): Eon 6.9 mJ, Eoff 31.6 mJ
- Fusion diode VF: 1.54 V typ (1.95 V max) at IF = 600 A, Tvj = 25 °C
- Fusion diode reverse recovery (IF = 600 A, Tvj = 175 °C): Qr 23.7 μC, Irm 350 A, Erec 8.42 mJ
- Fusion transistor short-circuit current ISC: 10000 A at Tvj = 25 °C and 6100 A at 175 °C (VCC = 470 V, tP = 1.5 μs)
- Inverter IGBT: VCE,sat 1.20 V typ (1.33 V max) at IC = 300 A, Tvj = 25 °C; Rth,j-f 0.156 K/W; ICRM 1150 A
- MOSFET: RDS,on 3.77 mΩ typ (5.15 mΩ max) at ID = 186 A, VGS = 18 V, Tvj = 25 °C; pulsed drain current 400 A
- Fusion diode Rth,j-f: 0.296 K/W (50% water / 50% ethylene glycol, 10 dm³/min, Tf = 65 °C)
- Module lead resistance: 0.60 mΩ per switch (Tf = 25 °C)
Features:
- Blocking voltage 750 V; implemented current 980 A, repetitive peak current 1960 A
- Fusion Switch: EDT3 IGBT/diode and CoolSiC Gen2 MOSFET
- Optimized for simultaneous gate drive
- High I²t robustness; low conduction and switching losses; low inductive design
- Integrated on-chip temperature sensor
- 4.25 kV DC 1 s insulation; high creepage and clearance distances (9.0 mm creepage, 4.5 mm clearance)
- Direct-cooled PinFin baseplate; Si3N4 ceramic
- Guiding elements for PCB and cooler assembly; PressFIT contact technology
- RoHS compliant, lead-free; UL 94 V0 module frame
- Qualified according to AQG 324
Applications:
- Automotive applications
- (Hybrid) electrical vehicles (H)EV
- Motor drives
- Commercial, construction and agricultural vehicles (CAV)
Package:
- HybridPACK Drive G2 module, PinFin direct-cooled baseplate (Cu+Ni), 760 g, PressFIT contacts
FS980R08A7F32B Features
- Electrical features
- -Blocking voltage 750 V
- -Implemented current 980 A / Repetitive peak current 1960 A
- -Fusion Switch - EDT3 IGBT/Diode & CoolSiC ™ Gen2 MOSFET
- -Optimized for simultaneous gate drive
- -High I2t robustness
- -Low conduction losses
- -Low switching losses
- -Low inductive design
- -Tvj,op = 175°C
- -Integrated on-chip temperature sensor
- Mechanical features
- -4.25 kV DC 1 second insulation
- -High creepage and clearance distances
- -Compact design
- -High power density
- -Direct-cooled PinFin base plate
- -High-performance Si3N4 ceramic
- -Guiding elements for PCB and cooler assembly
- -PressFIT contact technology
- -RoHS compliant, lead-free
- -UL 94 V0 module frame
FS980R08A7F32B Applications
-
Automotive applications -(Hybrid)electrical vehicles(H)EV
-
Motor drives
-
Commercial, construction and agricultural vehicles(CAV)## Product validation
-
Qualified according to AQG 324, release no.: 03.1/2021
FS980R08A7F32B Thermal Information
Tf = 65 °C, 50% water / 50% ethylene glycol
7 Characteristics diagrams
FS980R08A7F32B Package Information
Figure 2
9 Package outlines
Figure 3
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| FS980R08A7F32BHPSA1 | Infineon | Module |
More datasheets
Ask your AI agent about the FS980R08A7F32B
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the FS980R08A7F32B run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.