EFR32MG1P233F256GM48-C0
EFR32MG1 Mighty Gecko Multi-Protocol SoC Family Data Sheet
The EFR32MG1P233F256GM48-C0 is an electronic component from Silicon Labs. EFR32MG1 Mighty Gecko Multi-Protocol SoC Family Data Sheet. View the full EFR32MG1P233F256GM48-C0 datasheet below including electrical characteristics, absolute maximum ratings.
Manufacturer
Silicon Labs
Overview
Part: EFR32MG1 Mighty Gecko Multi-Protocol SoC Family (Silicon Labs)
Type: Multi-Protocol Wireless System-on-Chip
Description: 32-bit ARM Cortex-M4 core at 40 MHz with 256 kB Flash and 32 kB RAM, supporting 2.4 GHz and Sub-GHz radio operation with up to 19 dBm (2.4 GHz) or 20 dBm (Sub-GHz) TX power.
Operating Conditions:
- Supply voltage: 1.85–3.8 V
- Operating temperature: -40 to +125 °C
- Max operating frequency: 40 MHz
- Max TX power: 19 dBm (2.4 GHz), 20 dBm (Sub-GHz)
Absolute Maximum Ratings:
- Max supply voltage: null
- Max continuous current: null
- Max junction/storage temperature: null
Key Specs:
- Core: 32-bit ARM Cortex-M4 with DSP instruction and floating-point unit
- Flash program memory: 256 kB
- RAM data memory: 32 kB
- 2.4 GHz radio transmit power: Up to 19 dBm
- Sub-GHz radio transmit power: Up to 20 dBm
- RX current (2.4 GHz, 1 Mbps GFSK): 8.7 mA
- EM2 DeepSleep current: 2.2 μA (4 kB RAM retention, RTCC running)
- ADC: 12-bit, 1 Msps SAR
Features:
- Supports Zigbee, Thread, Bluetooth Low Energy, and Proprietary Protocols
- Integrated PA with up to 19 dBm (2.4 GHz) or 20 dBm (Sub-GHz) TX power
- Autonomous Hardware Crypto Accelerator and Random Number Generator
- 12-channel Peripheral Reflex System
- Wide selection of MCU peripherals including ADC, ACMP, IDAC, Timers, USART, LEUART, I2C
Applications:
- Connected Home
- Lighting
- Health and Wellness
- Metering
- Building Automation and Security
Package:
- QFN32 (5x5 mm)
- QFN48 (7x7 mm)
Features
- 32-bit ARM® Cortex®-M4 core with 40 MHz maximum operating frequency
- 256 kB of flash and 32 kB of RAM
- Supports Zigbee, Thread and Bluetooth Low Energy
- 12-channel Peripheral Reflex System enabling autonomous interaction of MCU peripherals
- Autonomous Hardware Crypto Accelerator and Random Number Generator
- Integrated PA with up to 19 dBm (2.4 GHz) or 20 dBm (Sub-GHz) TX power
- · Integrated balun for 2.4 GHz
- · Robust peripheral set and up to 32 GPIO
Electrical Characteristics
4.1 Electrical Characteristics
All electrical parameters in all tables are specified under the following conditions, unless stated otherwise:
-
Typical values are based on TAMB=25 °C and VDD= 3.3 V, by production test and/or technology characterization.
-
adesigns
ation, and operation.
Imperature limits.
Approximation of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the property of the prop · Radio performance numbers are measured in conducted mode, based on Silicon Laboratories reference designs using output pow-
- · Minimum and maximum values represent the worst conditions across supply voltage, process variation, and operating temperature,
Absolute Maximum Ratings
Stresses above those listed below may cause permanent damage to the device. This is a stress rating only and functional operation of the devices at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. For more information on the available quality and reliability data, see the Quality and Reliability Monitor Report at http://www.silabs.com/support/quality/pages/default.aspx.
Table 4.1. Absolute Maximum Ratings
| Parameter | Symbol | Test Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Storage temperature range | TSTG | -50 | - | 150 | °C | |
| Voltage on any supply pin | VDDMAX | -0.3 | - | 3.8 | V | |
| Voltage ramp rate on any supply pin | VDDRAMPMAX | - | - | 1 | V / μs | |
| DC voltage on any GPIO pin | VDIGPIN | 5V tolerant GPIO pins 1 2 3 | -0.3 | - | Min of 5.25 and IOVDD +2 | V |
| Standard GPIO pins | -0.3 | - | IOVDD+0.3 | V | ||
| Voltage on HFXO pins | VHFXOPIN | -0.3 | - | 1.4 | V | |
| Input RF level on pins 2G4RF_IOP and 2G4RF_ION | PRFMAX2G4 | - | - | 10 | dBm | |
| Voltage differential between RF pins (2G4RF_IOP - 2G4RF_ION) | VMAXDIFF2G4 | -50 | - | 50 | mV | |
| Absolute voltage on RF pins 2G4RF_IOP and 2G4RF_ION | VMAX2G4 | -0.3 | - | 3.8 | V | |
| Absolute voltage on Sub- GHz RF pins | VMAXSUBG | Pins SUBGRF_OP and SUBGRF_ON | -0.3 | - | 3.8 | V |
| Pins SUBGRF_IP and SUBGRF_IN, | -0.3 | - | 0.3 | V | ||
| Total current into VDD power lines | IVDDMAX | Source | - | - | 200 | mA |
| Total current into VSS ground lines | IVSSMAX | Sink | - | - | 200 | mA |
| Current per I/O pin | IIOMAX | Sink | - | - | 50 | mA |
| Source | - | - | 50 | mA | ||
| Current for all I/O pins | IIOALLMAX | Sink | - | - | 200 | mA |
| Source | - | - | 200 | mA | ||
| Junction temperature | TJ | -G grade devices | -40 | - | 105 | °C |
| -I grade devices | -40 | - | 125 | °C |
Parameter Symbol Test Condition Min Typ Max Unit
-
- When a GPIO pin is routed to the analog module through the APORT, the maximum voltage = IOVDD.
-
- Valid for IOVDD in valid operating range or when IOVDD is undriven (high-Z). If IOVDD is connected to a low-impedance source below the valid operating range (e.g. IOVDD shorted to VSS), the pin voltage maximum is IOVDD + 0.3 V, to avoid exceeding the maximum IO current specifications.
- Recommended for New Desi 3. To operate above the IOVDD supply rail, over-voltage tolerance must be enabled according to the GPIO_Px_OVTDIS register. Pins with over-voltage tolerance disabled have the same limits as Standard GPIO.
Thermal Information
Table 4.3. Thermal Characteristics
| Parameter | Symbol | Test Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Thermal resistance, QFN48 Package | THETAJA_QFN48 | 2-Layer PCB, Air velocity = 0 m/s | _ | 64.5 | _ | °C/W |
| 2-Layer PCB, Air velocity = 1 m/s | _ | 51.6 | _ | °C/W | ||
| 2-Layer PCB, Air velocity = 2 m/s | _ | 47.7 | _ | °C/W | ||
| 4-Layer PCB, Air velocity = 0 m/s | _ | 26.2 | _ | °C/W | ||
| 4-Layer PCB, Air velocity = 1 m/s | _ | 23.1 | _ | °C/W | ||
| 4-Layer PCB, Air velocity = 2 m/s | _ | 22.1 | _ | °C/W | ||
| Thermal resistance, QFN32 Package | THETAJA_QFN32 | 2-Layer PCB, Air velocity = 0 m/s | _ | 79 | _ | °C/W |
| 2-Layer PCB, Air velocity = 1 m/s | _ | 62.2 | _ | °C/W | ||
| 2-Layer PCB, Air velocity = 2 m/s | _ | 54.1 | _ | °C/W | ||
| 4-Layer PCB, Air velocity = 0 m/s | _ | 32 | _ | °C/W | ||
| 4-Layer PCB, Air velocity = 1 m/s | _ | 28.1 | _ | °C/W | ||
| 4-Layer PCB, Air velocity = 2 m/s | _ | 26.9 | _ | °C/W |
Package Information
Figure 7.1. QFN48 Package Drawing
Table 7.1. QFN48 Package Dimensions
| Dimension | Min | Typ | Max |
|---|---|---|---|
| A | 0.80 | 0.85 | 0.90 |
| A1 | 0.00 | 0.02 | 0.05 |
| A3 | 0.20 REF | ||
| b | 0.18 | 0.25 | 0.30 |
| D | 6.90 | 7.00 | 7.10 |
| E | 6.90 | 7.00 | 7.10 |
| D2 | 4.60 | 4.70 | 4.80 |
| E2 | 4.60 | 4.70 | 4.80 |
| e | 0.50 BSC | ||
| L | 0.30 | 0.40 | 0.50 |
| K | 0.20 | - (0) | _ |
| R | 0.09 | 43 | 0.14 |
| aaa | 0.15 | ||
| bbb | 0.10 | ||
| ccc | 0.10 | ||
| ddd | 0.05 | ||
| eee | . 0 | 0.08 | |
| fff | XC | 0.10 |
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| EFR32MG1P232F256GM48-C0 | Silicon Labs | — |
| EFR32MG1P232F256IM48-C0 | Silicon Labs | — |
| EFR32MG1P233F230GIVI40-CU | Silicon Labs | — |
| EFR32MG1P233F256IM48-C0 | Silicon Labs | — |
| SI2301CDS-T1-GE3 | Vishay Siliconix | TO-236-3, SC-59, SOT-23-3 |
Get structured datasheet data via API
Get started free