C2686444

The C2686444 is an electronic component. View the full C2686444 datasheet below including electrical characteristics, absolute maximum ratings.

Overview

Part: LD2985 — STMicroelectronics

Type: Fixed Output Voltage Regulator (LDO)

Description: A 150 mA fixed output voltage regulator with very low dropout voltage (280 mV at 150 mA load) and low quiescent current (80 μA typ. at no load), featuring logic controlled electronic shutdown and low output noise voltage (30 μVrms).

Operating Conditions:

Supply voltage: 2.5–16 V
Operating temperature: -40 to 125 °C
Output voltage: 1.8, 2.5, 2.8, 3, 3.1, 3.3, 5 V

Absolute Maximum Ratings:

Max supply voltage: 16 V
Max continuous current: Internally limited
Max storage temperature: 150 °C
Max operating junction temperature: 125 °C

Key Specs:

Dropout voltage: 280 mV (typ. at 150 mA)
Quiescent current: 80 μA (typ. at I O = 0)
Output noise voltage: 30 μVrms (typ. B = 300 Hz to 50 kHz, C BYP = 0.01 μF, C O = 10 μF)
Load regulation: 20 mV (max. I O = 1 to 150 mA, T J = -40 to 125 °C)
Line regulation: 0.003 %/V I (typ. V I = V O + 1 V to 16 V, I O = 1 mA)
Short-circuit current: 400 mA (typ. R L = 0)
Inhibit input logic low: 0.15 V (max. T J = -40 to 125 °C)

Features:

Very low dropout voltage (280 mV at 150 mA and 7 mV at 1 mA load)
Very low quiescent current (2 mA typ. at 150 mA load and 80 μA at no load)
Output current up to 150 mA
Logic controlled electronic shutdown
Output voltage of 1.8, 2.5, 2.8, 3, 3.1, 3.3, 5 V
Internal current and thermal limit
Low output noise voltage 30 μVrms
Small package SOT23-5L
Temperature range: - 40 °C to 125 °C

Applications:

Cellular phone
Palmtop laptop computer
Personal digital assistant (PDA)
Personal stereo
Camcorder and camera

Package:

SOT23-5L

Features

Very low dropout voltage (280 mV at 150 mA and 7 mV at 1 mA load)
Very low quiescent current (2 mA typ. at 150 mA load and 80 μA at no load)
Output current up to 150 mA
Logic controlled electronic shutdown
Output voltage of 1.8, 2.5, 2.8, 3, 3.1, 3.3, 5 V
Internal current and thermal limit
Low output noise voltage 30 μVrms
Small package SOT23-5L
Temperature range: - 40 °C to 125 °C

Pin Configuration

Figure 2. Pin connections (top view)

Table 2. Pin description

Pin n°	Symbol	Name and function
1	IN	Input port
2	GND	Ground pin
3	INHIBIT	Control switch ON/OFF. Inhibit is not internally pulled-up; it cannot be left floating. Disable the device when connected to GND or to a positive voltage less than 0.18 V
4	Bypass	Bypass pin: capacitor to be connected to GND in order to improve the thermal noise performance
5	OUT	Output port

Table 3. Thermal data

Symbol	Parameter	Value	Unit
R thJC	Thermal resistance junction-case	81	°C/W
R thJA	Thermal resistance junction-ambient	255	°C/W

Table 3. Thermal data

Electrical Characteristics

T J = 25 °C, V I = V O + 1 V, I O = 50 mA, V INH = 2 V, C I = C O = 1 μF, unless otherwise specified.

Table 5. Electrical characteristics

Symbol	Parameter	Test conditions	Min.	Typ.	Max.	Unit
V OP	Operating input voltage		2.5		16	V
V O	Output voltage	V I = 2.8 V	1.755	1.8	1.845	V
V O	Output voltage	I O = 1 to 150 mA	1.746		1.854	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	1.728		1.872	V
V O	Output voltage	V I = 3.5 V	2.437	2.5	2.562	V
V O	Output voltage	I O = 1 to 150 mA	2.425		2.575	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	2.4		2.6	V
V O	Output voltage	V I = 3.8 V	2.73	2.8	2.87	V
V O	Output voltage	I O = 1 to 150 mA	2.716		2.884	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	2.688		2.912	V
V O	Output voltage	V I = 4.0 V	2.925	3	3.075	V
V O	Output voltage	I O = 1 to 150 mA	2.91		3.09	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	2.88		3.12	V
V O	Output voltage	V I = 4.1 V	3.023	3.1	3.177	V
V O	Output voltage	I O = 1 to 150 mA	3.007		3.193	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	2.976		3.224	V
V O	Output voltage	V I = 4.3 V	3.218	3.3	3.382	V
V O	Output voltage	I O = 1 to 150 mA	3.201		3.399	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	3.168		3.432	V
V O	Load regulation	I O = 1 to 150 mA, T J = -40 to 125 °C			20	mV
V O	Output voltage	V I = 6.0 V	4.875	5	5.125	V
V O	Output voltage	I O = 1 to 150 mA	4.85		5.15	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	4.8		5.2	V
I SC	Short-circuit current	R L = 0		400		mA
∆ V O / ∆ V I	Line regulation	V I = V O + 1 V to 16 V, I O = 1 mA		0.003	0.014	%/V I
∆ V O / ∆ V I	Line regulation	V I = V O + 1 V to 16 V, I O = 1 mA, T J = -40 to 125 °C			0.032	%/V I

Table 5. Electrical characteristics

Table 5. Electrical characteristics (continued)

Symbol	Parameter	Test conditions	Min.	Typ.	Max.	Unit
V DROP	Dropout voltage	I O = 0		1	3	mV
V DROP		I O = 0, T J = -40 to 125 °C			5	mV
V DROP		I O = 1 mA		7	10	mV
V DROP		I O = 1 mA, T J = -40 to 125 °C			15	mV
V DROP		I O = 10 mA		40	60	mV
V DROP		I O = 10 mA, T J = -40 to 125 °C			90	mV
V DROP		I O = 50 mA		120	150	mV
V DROP		I O = 50 mA, T J = -40 to 125 °C			225	mV
V DROP		I O = 150 mA		280	350	mV
V DROP		I O = 150 mA, T J = -40 to 125 °C			575	mV
I Q		I O = 0		80	100	μA
I Q		I O = 0, T J = -40 to 125 °C			150	μA
I Q		I O = 1 mA		100	150	μA
I Q		I O = 1 mA, T J = -40 to 125 °C			200	μA
I Q	Quiescent current	I O = 10 mA		200	300	μA
I Q	ON MODE	I O = 10 mA, T J = -40 to 125 °C			400	μA
I Q		I O = 50 mA		600	900	μA
I Q		I O = 50 mA, T J = -40 to 125 °C			1200	μA
I Q		I O = 150 mA		2000	3000	μA
I Q		I O = 150 mA, T J = -40 to 125 °C			4000	μA
	OFF MODE	V INH <0.18 V		0		μA
	OFF MODE	V INH <0.18 V, T J = -40 to 125 °C			2	μA
SVR	Supply voltage rejection	C BYP = 0.01 μF, C O = 10 μF, f = 1 kHz		45		dB
V IL	Inhibit input logic low	T J = -40 to 125 °C			0.15	V
V IH	Inhibit input logic high	T J = -40 to 125 °C	2			V
I INH	Inhibit input current	V INH = 0 V, T J = -40 to 125 °C		5	15	μA
I INH		V INH = 5 V, T J = -40 to 125 °C		0	-1	μA
e N	Output noise voltage	B = 300 Hz to 50 kHz, C BYP = 0.01 μF, C O = 10 μF		30		μV

Table 5. Electrical characteristics (continued)

Absolute Maximum Ratings

Table 4. Absolute maximum ratings

Symbol	Parameter	Value	Unit
V I	DC input voltage	-0.3 to 16	V
V INH	INHIBIT input voltage	-0.3 to 16	V
I O	Output current	Internally limited
P D	Power dissipation	Internally limited
T STG	Storage temperature range	-65 to 150	°C
T OP	Operating junction temperature range	-40 to 125	°C

Note: Absolute maximum ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied.

Table 4. Absolute maximum ratings

Package Information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Figure 18. SOT23-5L package outline

Table 6. SOT23-5L mechanical data

Dim.	mm	mm	mm
Dim.	Min.	Typ.	Max.
A	0.90		1.45
A1	0		0.15
A2	0.90		1.30
b	0.30		0.50
c	0.09		0.20
D		2.95
E		1.60
e		0.95
H		2.80
L	0.30		0.60
θ	0		8

Figure 19. SOT23-5L package outlineSOT23-5L recommended footprint (dimensions in mm)

Table 6. SOT23-5L mechanical data

Related Variants

The following components are covered by the same datasheet.

Part Number	Manufacturer	Package
LD2985BM18R	STMicroelectronics	—
LD2985BM25R	STMicroelectronics	—
LD2985BM28R	STMicroelectronics	—
LD2985BM30R	STMicroelectronics	—
LD2985BM31R	STMicroelectronics	—

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Get structured datasheet data via API

Get started free