C1409

Part: MC14094B — onsemi

Type: 8-Stage Shift/Store Register with Three-State Outputs

Description: The MC14094B combines an 8-stage shift register with a data latch for each stage and a 3-state output from each latch, useful for serial-to-parallel data conversion.

Operating Conditions:

• Supply voltage: 5.0–15 V
• Operating temperature: -55 to +125 °C
• Max clock frequency: 6.0 MHz (at VDD = 15 V, T_A = 25 °C)

Absolute Maximum Ratings:

• Max supply voltage: +18.0 V
• Max continuous current: ±10 mA per pin
• Max storage temperature: +150 °C

Key Specs:

• Output Voltage '0' Level (V_OL): 0.05 V max (at VDD = 5.0 V)
• Output Voltage '1' Level (V_OH): 4.95 V min (at VDD = 5.0 V)
• Quiescent Current (I_DD): 5.0 μA max (at VDD = 5.0 V, T_A = 25 °C)
• Input Capacitance (C_in): 7.5 pF max (at VDD = 15 V)
• Output Source Current (I_OH): -0.64 mA min (at VDD = 5.0 V, V_OH = 4.6 Vdc, T_A = -55 °C)
• Output Sink Current (I_OL): 0.64 mA min (at VDD = 5.0 V, V_OL = 0.4 Vdc, T_A = -55 °C)
• Max Clock Frequency (f_cl): 6.0 MHz (at VDD = 15 V, T_A = 25 °C)
• Data Setup Time (t_su): 60 ns min (at VDD = 5.0 V, T_A = 25 °C)

Features:

• Capable of Driving Two Low-Power TTL Loads or One Low-Power Schottky TTL Load Over the Rated Temperature Range
• 3-State Outputs
• Input Diode Protection
• Dual Outputs for Data Out on Both Positive and Negative Clock Transitions
• Data Latch
• Useful for Serial-to-Parallel Data Conversion
• NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100 Qualified and PPAP Capable
• Pin-for-Pin Compatible with CD4094B
• Pb-Free and RoHS Compliant

Applications:

• Serial-to-Parallel Data Conversion

Package:

• SOIC-16
• TSSOP-16

• Capable of Driving Two Low -Power TTL Loads or One Low -Power Schottky TTL Load Over the Rated Temperature Range
• 3 -State Outputs
• Input Diode Protection
• Dual Outputs for Data Out on Both Positive and Negative Clock Transitions
• Data Latch
• Useful for Serial -to -Parallel Data Conversion
• NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC -Q100 Qualified and PPAP Capable
• Pin -for -Pin Compatible with CD4094B
• These Devices are Pb -Free and are RoHS Compliant

Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.

1. Temperature Derating: 'D/DW' Packages: -7.0 mW/ _ C From 65 _ C To 125 _ C

This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high -impedance circuit. For proper operation, V in and V out should be constrained to the range V SS ≤ (V in or V out ) ≤ V DD .

Unused inputs must always be tied to an appropriate logic voltage level (e.g., either V SS or V DD ). Unused outputs must be left open.

SOIC -16 D SUFFIX CASE 751B

TSSOP -16 DT SUFFIX CASE 948F