Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

BQ25616JRTWR

Standalone Li-ion Buck Battery Charger with Power Path

The BQ25616JRTWR is a standalone li-ion buck battery charger with power path from Texas Instruments. View the full BQ25616JRTWR datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

BQ25616JRTWR shares its datasheet with BQ25616, whose page lists every part number it covers.

Official BQ25616JRTWR datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Standalone Li-ion Buck Battery Charger with Power Path

BQ25616JRTWR Key Specifications

ParameterValue
Input voltage range4–13.5 V (22 V abs-max VBUS rating)
Fast charging currentup to 3 A (ICHG pin range 300–3000 mA)
Input current limit (ILIM pin range)500–3200 mA
Charge voltage options4.1 V / 4.2 V / 4.35 V with ±0.4% regulation accuracy
Charge current regulation±6%; input current regulation: ±7.5%
Boost (OTG) output5 V, up to 1.2 A
Charge efficiency~92% at 2 A from 5 V input
Battery leakage (system standby)9.5 μA; BATFET RDSON 19.5 mΩ
Minimum system voltage3.5 V
VBUS OVP reaction time130 ns

BQ25616JRTWR Overview

Part: BQ25616 / BQ25616J — Texas Instruments

Type: Standalone single-cell Li-ion/Li-polymer buck battery charger with power path and boost (OTG) operation

Description: 4–13.5 V input, 3 A (fast charge) standalone 1-cell switch-mode buck charger with NVDC power path, 1.5 MHz switching, and 5 V boost output up to 1.2 A.

Operating Conditions:

  • Supply voltage (VBUS): 4–13.5 V
  • Operating temperature (ambient): -40 to 85 °C
  • Battery voltage: up to 4.35 V
  • Input current up to 3.2 A; fast charging current up to 3 A

Absolute Maximum Ratings:

  • Max input voltage: VAC 30 V (converter not switching); VBUS 22 V (converter not switching)
  • PMID: 22 V; SW: 16 V; BTST: 22 V; ACDRV: 40 V
  • BAT, SYS: 7 V (converter not switching)
  • Output sink current (STAT, PG): 6 mA
  • Junction temperature: -40 to 150 °C
  • Storage temperature: -55 to 150 °C

Key Specs:

  • Input voltage range: 4–13.5 V (22 V abs-max VBUS rating)
  • Fast charging current: up to 3 A (ICHG pin range 300–3000 mA)
  • Input current limit (ILIM pin range): 500–3200 mA
  • Charge voltage options: 4.1 V / 4.2 V / 4.35 V with ±0.4% regulation accuracy
  • Charge current regulation: ±6%; input current regulation: ±7.5%
  • Boost (OTG) output: 5 V, up to 1.2 A
  • Charge efficiency: ~92% at 2 A from 5 V input
  • Battery leakage (system standby): 9.5 μA; BATFET RDSON 19.5 mΩ
  • Minimum system voltage: 3.5 V
  • VBUS OVP reaction time: 130 ns

Features:

  • 1.5 MHz synchronous switch-mode buck charger
  • Boost converter with accurate constant-current limit, soft-start up to 500 μF load, PFM light-load mode
  • Narrow VDC (NVDC) power path with instant-on system operation with no or deeply discharged battery
  • USB SDP, CDP, DCP, and nonstandard adapter auto-detection via D+/D-
  • VINDPM tracks battery voltage; programmable IINDPM via ILIM pin
  • Optional external OVPFET (ACDRV) supports input up to 30 V
  • JEITA (BQ25616J) or Hot/Cold (BQ25616) TS profile
  • 10-hour charge safety timer
  • Integrated MOSFETs, current sensing, loop compensation, and bootstrap diode
  • Thermal regulation above 110 °C junction
  • IEC 62368-1 CB certification

Applications:

  • Electronic point of sale (EPOS)
  • Wireless speakers
  • Industrial, medical, and portable electronics

Package:

  • WQFN-24 (RTW), 4.00 mm × 4.00 mm

BQ25616JRTWR Features

  • High-efficiency, 1.5-MHz, synchronous switchmode buck charger
  • -92% charge efficiency at 2 A from 5-V input
  • -±0.5% charge voltage regulation
  • -Adjustable charge voltage from VSET pin supports 4.1 V, 4.2 V, and 4.35 V with ±0.4% regulation accuracy
  • -±6% charge current regulation
  • -±7.5% input current regulation
  • -Supports JEITA (BQ25616J) or Hot/Cold (BQ25616) temperature sensing profile
  • -10-hr charging safety timer
  • Support USB On-The-Go (OTG)
  • -5-V boost converter with up to 1.2-A output
  • -92% boost efficiency at 1-A output
  • -Accurate constant current (CC) limit
  • -Soft-start up to 500-μF capacitive load
  • -PFM mode for light load operation
  • Single input supporting USB input, high-voltage adapter, or wireless power
  • -Support 4-V to 13.5-V input voltage range with 22-V absolute max input rating
  • -130-ns fast turn-off input overvoltage protection with optional external OVPFET standing input voltage up to 30 V
  • -Programmable input current limit (IINDPM) with ILIM pin
  • -VINDPM threshold automatically tracks battery voltage for maximum power
  • -Auto detect USB SDP, CDP, DCP and nonstandard adaptors
  • Narrow VDC (NVDC) power path management
  • -System instant-on with no battery or deeply discharged battery
  • Low RDSON 19.5-mΩ BATFET to minimize charging loss and extend battery run time
  • 9.5-μA low battery leakage current with system standby
  • High integration includes all MOSFETs, current sensing and loop compensation
  • Safety Related Certifications:
  • -IEC 62368-1 CB Certification

BQ25616JRTWR Applications

BQ25616JRTWR Pin Configuration

Figure 7-1. RTW Package 24-Pin WQFN Top View

BQ25616JRTWR Electrical Characteristics

VVBUS_UVLOZ < VVBUS < VVBUS_OV and VVBUS > VBAT + VSLEEP, TJ = -40°C to +125°C, and TJ = 25°C for typical values (unless otherwise noted)

PARAMETERPARAMETERTEST CONDITIONSMINTYPMAXUNIT
QUIESCENT CURRENTSQUIESCENT CURRENTSQUIESCENT CURRENTSQUIESCENT CURRENTSQUIESCENT CURRENTSQUIESCENT CURRENTSQUIESCENT CURRENTS
I Q_BATQuiescent battery current (BAT, SYS, SW)VBAT = 4.5V, VBUS floating or VBUS = 0V - 5V, SCL, SDA = 0V or 1.8V, T J < 85 °C, BATFET on.9.515μA
I VBUSInput current (VBUS) in buck mode when converter is switchingVBUS=5V, charge disabled, converter switching, ISYS = 0A2.3mA
I BSTQuiescent battery current (BAT, SYS, SW) in boost mode when converter is switchingVBAT = 4.5V, VBUS = 4.9V, boost mode enabled, converter switching, I VBUS = 0A2.4mA
VBUS / VBAT SUPPLYVBUS / VBAT SUPPLYVBUS / VBAT SUPPLYVBUS / VBAT SUPPLYVBUS / VBAT SUPPLYVBUS / VBAT SUPPLYVBUS / VBAT SUPPLY
V VBUS_OPVBUS operating range413.5V
V VAC_UVLOZVAC rising for ACFET turnon, no batteryVAC rising3.553.85V
V VAC_UVLOVAC falling for ACFET turnoff, no batteryVAC falling3.253.55V
V ACDRVExternal ACFET gate drive voltage with minimum 8nF CGS10V
V VBUS_UVLOZVBUS rising for active bias, no batteryVBUS rising3.33.7V
V VBUS_UVLOVBUS falling to turnoff bias, no batteryVBUS falling33.3V
V VBUS_PRESENTVBUS to enable REGNVBUS rising3.653.9V
V VBUS_PRESENTZVBUS to disable REGNVBUS falling3.153.4V
V SLEEPEnter Sleep mode thresholdVBUS falling, VBUS - VBAT, VBAT = 4V1560110mV
V SLEEPZExit Sleep mode thresholdVBUS rising, VBUS - VBAT, VBAT = 4V115220340mV
V ACOVVAC overvoltage rising threshold to turnoff ACFET and switchingVAC rising13.514.214.85V
V ACOVVAC overvoltage falling threshold to turnon ACFET and switchingVAC falling,1313.914.5V
V BAT_UVLOZBAT voltage for active bias, no VBUSVBAT rising2.5V
V BAT_DPLZBAT depletion rising threshold to turn on BATFETVBAT rising2.352.8V
V BAT_DPLBAT depletion falling threshold to turn off BATFETVBAT falling2.182.62V
V POORSRCBad adapter detection thresholdVBUS falling3.753.94.0V
POWER PATH MANAGEMENTPOWER PATH MANAGEMENTPOWER PATH MANAGEMENTPOWER PATH MANAGEMENTPOWER PATH MANAGEMENTPOWER PATH MANAGEMENTPOWER PATH MANAGEMENT
V SYS_MINTypical minimum system regulation voltageVBAT=3.2V < SYS_MIN = 3.5V, ISYS = 0A3.53.65V
V SYS_OVPSystem overvoltage thresholdVREG = 4.35V, Charge disabled, ISYS = 0A4.7V
R ON_RBFETBlocking FET on-resistance45mΩ

VVBUS_UVLOZ < VVBUS < VVBUS_OV and VVBUS > VBAT + VSLEEP, TJ = -40°C to +125°C, and TJ = 25°C for typical values (unless otherwise noted)

PARAMETERTEST CONDITIONSMINTYPMAXUNIT
R ON_HSFETHigh-side switching FET on-resistance62mΩ
R ON_LSFETLow-side switching FET on-resistance71mΩ
V BATFET _ FWDBATFET forward voltage in supplement modeBAT discharge current 10mA, converter running30mV
BATTERY CHARGERBATTERY CHARGERBATTERY CHARGERBATTERY CHARGERBATTERY CHARGERBATTERY CHARGERBATTERY CHARGER
VREG = 4.1V, R VSET =10kΩ, T J = 0°C - 85°C4.08364.14.1164V
V REG_ACCCharge voltage accuracyVREG = 4.2V, R VSET >50kΩ, T J = 0°C - 85°C4.18324.24.2168V
VREG = 4.35V, R VSET <500Ω, T J = 0°C - 85°C4.33264.354.3674V
I CHG_RANGETypical charge current regulation range03A
ICHG=K ICHG /R ICHG, VBAT = 3.1V, T J = -40°C - 85°C639677715AxΩ
K ICHGICHG pin setting ratioICHG=K ICHG /R ICHG, VBAT = 3.8V, T J = -40°C - 85°C639677715AxΩ
R ICHG = 1100 Ω, VBAT = 3.1V or 3.8V, T J = -40°C - 85°C0.5160.6150.715A
I CHG_ACCFast charge current regulation accuracyR ICHG = 562 Ω, VBAT = 3.1V or 3.8V, T J = -40°C - 85°C1.141.2051.28A
R ICHG = 372 Ω, VBAT = 3.1V or 3.8V, T J = -40°C - 85°C1.7151.821.89A
I PRECHG_RATIOPrecharge current accuracyAs percentage of ICHG, VBAT = 2.6V5%
R ICHG = 1100 Ω, VBAT = 2.6V, T J = -40°C - 85°C213038mA
I PRECHG_ACCPrecharge current accuracyR ICHG = 562 Ω, VBAT = 2.6V, T J = - 40°C - 85°C486067mA
R ICHG = 372 Ω, VBAT = 2.6V, T J = - 40°C - 85°C769097mA
I TERM_RATIOTermination current accuracyAs percentage of ICHG, VBAT = 4.35V, (char, all codes)5%
R ICHG = 1100 Ω, VBAT = 4.35V, T J = 0°C - 85°C93157mA
I TERM_ACCTermination current accuracyR ICHG = 562 Ω, VBAT = 4.35V, T J = 0°C - 85°C366085mA
R ICHG = 372 Ω, VBAT = 4.35V, T J = 0°C - 85°C5691126mA
V BAT_SHORTZBattery short voltage rising threshold to start pre-chargeVBAT rising2.132.252.35V
V BAT_SHORTBattery short voltage falling threshold to stop pre-chargeVBAT falling1.8522.15V
I BAT_SHORTBattery short trickle charging currentVBAT < V BAT_SHORTZ7090110mA
Battery LOWV rising threshold to start fast-chargeVBAT rising33.123.24V
V BATLOWVBattery LOWV falling threshold to stop fast-chargeVBAT falling2.72.82.9V
V RECHGBattery recharge thresholdVBAT falling90100150mV
I SYS_LOADSystem discharge load current during SYSOVP30mA

VVBUS_UVLOZ < VVBUS < VVBUS_OV and VVBUS > VBAT + VSLEEP, TJ = -40°C to +125°C, and TJ = 25°C for typical values (unless otherwise noted)

PARAMETERTEST CONDITIONSMINTYPMAXUNIT
R ON_BATFETBattery FET on-resistanceT J = -40°C - 85°C T = -40°C - 125°C19.5 19.526 30mΩ mΩ
BATTERY OVERVOLTAGE PROTECTIONBATTERY OVERVOLTAGE PROTECTIONBATTERY OVERVOLTAGE PROTECTIONBATTERY OVERVOLTAGE PROTECTIONBATTERY OVERVOLTAGE PROTECTIONBATTERY OVERVOLTAGE PROTECTIONBATTERY OVERVOLTAGE PROTECTION
VBattery overvoltage rising thresholdVBAT rising, as percentage of VREG103104105%
BAT_OVPBattery overvoltage falling thresholdVBAT falling, as percentage of VREG101102103%
INPUT VOLTAGE / CURRENT REGULATIONINPUT VOLTAGE / CURRENT REGULATIONINPUT VOLTAGE / CURRENT REGULATIONINPUT VOLTAGE / CURRENT REGULATIONINPUT VOLTAGE / CURRENT REGULATIONINPUT VOLTAGE / CURRENT REGULATIONINPUT VOLTAGE / CURRENT REGULATION
V INDPM_ACCTypical input voltage regulation accuracy4.1714.34.429V
V INDPM_TRACKVINDPM threshold to track battery voltageVBAT = 4.35V4.454.554.74V
I INDPM_ACCInput current regulation accuracyIINDPM = 500mA (T J =-40°C - 85°C)450465500mA
I INDPM_ACCInput current regulation accuracyIINDPM = 900mA (T J =-40°C-85°C)750835900mA
I INDPM_ACCInput current regulation accuracyIINDPM = 1500mA (T J =-40°C-85°C)130013901500mA
K ILIMILIM pin setting ratio459478500A x Ω
D+ / D- DETECTIOND+ / D- DETECTIOND+ / D- DETECTIOND+ / D- DETECTIOND+ / D- DETECTIOND+ / D- DETECTIOND+ / D- DETECTION
V DP_SRCD+ line source voltage500600700mV
I DP_SRCD+ line data contact detect current sourceVD+ = 200 mV71014μA
I DP_SINKD+ line sink currentVD+ = 500 mV50100150μA
V DP_DAT_REFD+ line data detect voltageD+ pin Rising250400mV
V DP_LGC_LOWD+ line logic low.D+ pin Rising800mV
R DP_DWND+ line pull-down resistanceVD+ = 500 mV14.2524.8kΩ
I D+_LKGLeakage current into D+ linePull up to 1.8 V-11μA
V DM_SRCD- line source voltage500600700mV
I DM_SINKD- line sink currentVD- = 500 mV50100150μA
V DM_DAT_REFD- line data detect voltageD- pin Rising250400mV
R DM_DWND- line pull-down resistanceVD- = 500 mV14.2524.8kΩ
I D-_LKGLeakage current into D- linePull up to 1.8 V-11μA
V D+ _2p8_hiD+ High comparator threshold for 2.8V detectionD+ pin rising2.8533.1V
V D+ _2p8_loD+ Low comparator threshold for 2.8V detectionD+ pin rising2.352.452.55V
V D+ _2p8D+ comparator threshold for non- standard adapter2.552.85V
V D- _2p8_hiD- High comparator threshold for 2.8V detectionD- pin rising2.8533.1V
V D- _2p8_loD- Low comparator threshold for 2.8V detectionD- pin rising2.352.452.55V
V D- _2p8D- comparator threshold for non- standard adapter2.552.85V
V D+ _2p0_hiD+ High comparator threshold for 2.0V detectionD+ pin rising2.152.252.35V
V D+ _2p0_loD+ Low comparator threshold for 2.0V detectionD+ pin rising1.61.71.85V
V D+ _2p0D+ comparator threshold for non- standard adapter1.852.15V
V D- _2p0_hiD- High comparator threshold for 2.0V detectionD- pin rising2.152.252.35V

VVBUS_UVLOZ < VVBUS < VVBUS_OV and VVBUS > VBAT + VSLEEP, TJ = -40°C to +125°C, and TJ = 25°C for typical values (unless otherwise noted)

PARAMETERTEST CONDITIONSMINTYPMAXUNIT
V D- _2p0_loD- Low comparator threshold for 2.0V detectionD- pin rising1.61.71.85V
V D- _2p0D- comparator threshold for non- standard adapter1.852.15V
V D+ _1p2_hiD+ High comparator threshold for 1.2V detectionD+ pin rising1.351.51.6V
V D+ _1p2_loD+ Low comparator threshold for 1.2V detectionD+ pin rising0.850.951.05V
V D+ _1p2D+ comparator threshold for non- standard adapter1.051.35V
V D- _1p2_hiD- High comparator threshold for 1.2V detectionD- pin rising1.351.51.6V
V D- _1p2_loD- Low comparator threshold for 1.2V detectionD- pin rising0.850.951.05V
V D- _1p2D- comparator threshold for non- standard adapter1.051.35V
THERMAL REGULATION AND THERMAL SHUTDOWNTHERMAL REGULATION AND THERMAL SHUTDOWNTHERMAL REGULATION AND THERMAL SHUTDOWNTHERMAL REGULATION AND THERMAL SHUTDOWNTHERMAL REGULATION AND THERMAL SHUTDOWNTHERMAL REGULATION AND THERMAL SHUTDOWNTHERMAL REGULATION AND THERMAL SHUTDOWN
T REGJunction temperature regulation accuracy110°C
T SHUTThermal Shutdown Rising thresholdTemperature Increasing150°C
T SHUTThermal Shutdown Falling thresholdTemperature Decreasing130°C
CHARGE MODE THERMISTOR COMPARATOR (JEITA 616J or HOT/COLD 616)CHARGE MODE THERMISTOR COMPARATOR (JEITA 616J or HOT/COLD 616)CHARGE MODE THERMISTOR COMPARATOR (JEITA 616J or HOT/COLD 616)CHARGE MODE THERMISTOR COMPARATOR (JEITA 616J or HOT/COLD 616)CHARGE MODE THERMISTOR COMPARATOR (JEITA 616J or HOT/COLD 616)CHARGE MODE THERMISTOR COMPARATOR (JEITA 616J or HOT/COLD 616)CHARGE MODE THERMISTOR COMPARATOR (JEITA 616J or HOT/COLD 616)
V T1_RISE%TS pin voltage rising threshold, Charge suspended above this voltage.As Percentage to REGN (0°C w/ 103AT)72.473.374.2%
V T1_FALL%TS pin voltage falling threshold. Charge re-enabled to 20% of ICHG and VREG below this voltage.As Percentage to REGN71.57272.5%
V T2_RISE%TS pin voltage rising threshold, Charge back to 20% of ICHG and VREG above this voltage (616J).As Percentage to REGN (10°C w/ 103AT)67.7568.2568.75%
V T2_FALL%TS pin voltage falling threshold. Charge back to ICHG and VREG below this voltage (616J)As Percentage to REGN66.4566.9567.45%
V T3_FALL%TS pin voltage falling threshold. Charge back to ICHG and VREG below this voltage (616J)As Percentage to REGN (45°C w/ 103AT)44.2544.7545.25%
V T3_RISE%TS pin voltage rising threshold. Charge back to ICHG and VREG above this voltage. (616J)As Percentage to REGN45.5546.0546.55%
V T5_FALL%TS pin voltage falling threshold, charge suspended below this voltage.As Percentage to REGN (60°C w/ 103AT)33.734.235.1%
V T5_RISE%TS pin voltage rising threshold. Charge back to ICHG and 4.1V above this voltage.As Percentage to REGN3535.536%
V T1_RISE_HC%TS pin voltage rising threshold. Charge suspended above this voltage. (616)As Percentage to REGN (0°C w/ 103AT)72.473.374.2%
V T1_FALL_HC%TS pin voltage falling threshold. Charge back to ICHG and VREG below this voltage. (616)As Percentage to REGN717273%

VVBUS_UVLOZ < VVBUS < VVBUS_OV and VVBUS > VBAT + VSLEEP, TJ = -40°C to +125°C, and TJ = 25°C for typical values (unless otherwise noted)

PARAMETERTEST CONDITIONSMINTYPMAXUNIT
V T3_FALL_HC%TS pin voltage falling threshold. Charge suspended below this voltage. (616)As Percentage to REGN (45°C w/ 103AT)44.2544.7545.25%
V T3_RISE _HC%TS pin voltage rising threshold. Charge back to ICHG and VREG above this voltage. (616)As Percentage to REGN45.5546.0546.55%
BOOST MODE THERMISTOR COMPARATOR (HOT/COLD)BOOST MODE THERMISTOR COMPARATOR (HOT/COLD)BOOST MODE THERMISTOR COMPARATOR (HOT/COLD)BOOST MODE THERMISTOR COMPARATOR (HOT/COLD)BOOST MODE THERMISTOR COMPARATOR (HOT/COLD)BOOST MODE THERMISTOR COMPARATOR (HOT/COLD)BOOST MODE THERMISTOR COMPARATOR (HOT/COLD)
V BCOLD_RISE%TS pin voltage rising threshold, boost mode is suspended above this voltage.As Percentage to REGN (-19.5°C w/ 103AT)79.58080.5%
V BCOLD_FALL%TS pin voltage falling thresholdAs Percentage to REGN (0°C w/ 103AT)72%
V BHOT_FALL%TS pin voltage threshold. boost mode is suspended below this voltage.As Percentage to REGN, (64°C w/ 103AT)30.231.232.2%
V BHOT_RISE%TS pin voltage rising thresholdAs Percentage to REGN, (45°C w/ 103AT)44%
CHARGE OVERCURRENT COMPARATOR (CYCLE-BY-CYCLE)CHARGE OVERCURRENT COMPARATOR (CYCLE-BY-CYCLE)CHARGE OVERCURRENT COMPARATOR (CYCLE-BY-CYCLE)CHARGE OVERCURRENT COMPARATOR (CYCLE-BY-CYCLE)CHARGE OVERCURRENT COMPARATOR (CYCLE-BY-CYCLE)CHARGE OVERCURRENT COMPARATOR (CYCLE-BY-CYCLE)CHARGE OVERCURRENT COMPARATOR (CYCLE-BY-CYCLE)
I HSFET_OCPHSFET cycle-by-cycle overcurrent threshold5.28.0A
SWITCHING CONVERTERSWITCHING CONVERTERSWITCHING CONVERTERSWITCHING CONVERTERSWITCHING CONVERTERSWITCHING CONVERTERSWITCHING CONVERTER
F SWPWM switching frequencyOscillator frequency1.321.51.68MHz
D MAXMaximum PWM Duty Cycle97%
BOOST MODE CONVERTERBOOST MODE CONVERTERBOOST MODE CONVERTERBOOST MODE CONVERTERBOOST MODE CONVERTERBOOST MODE CONVERTERBOOST MODE CONVERTER
V BATLOWV_OTGBattery voltage exiting boost modeV VBAT falling2.62.82.9V
Battery voltage entering boost modeV VBAT rising2.93.03.15V
V BST_ACCBoost mode voltage regulation accuracyIVBUS = 0A, BOOST_V = 5V4.8555.15V
I BST_ACCBoost mode current regulation accuracy1.21.41.6A
I SYS_OCP_Q4Boost mode battery discharge current clamp on BATFET Q4910A
REGN LDOREGN LDOREGN LDOREGN LDOREGN LDOREGN LDOREGN LDO
V REGNREGN LDO output voltageV VBUS = 5V, I REGN = 20mA4.584.74.8V
V VBUS = 9V, I REGN = 20mA5.666.5V
I REGNREGN LDO current limitV VBUS = 5V, V REGN = 3.8V50mA
LOGIC INPUT PINLOGIC INPUT PINLOGIC INPUT PINLOGIC INPUT PINLOGIC INPUT PINLOGIC INPUT PINLOGIC INPUT PIN
V IHInput high threshold level (/CE)1.3V
V ILInput low threshold level (/CE)0.4V
I IN_BIASHigh-level leakage current (/CE)Pull up rail 1.8V1μA
LOGIC OUTPUT PINLOGIC OUTPUT PINLOGIC OUTPUT PINLOGIC OUTPUT PINLOGIC OUTPUT PINLOGIC OUTPUT PINLOGIC OUTPUT PIN
V OLOutput low threshold level (STAT, /PG)Sink current = 5mA0.4V
I OUT_BIASHigh-level leakage current (STAT, /PG)Pull up rail 1.8V1μA

BQ25616JRTWR Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1)

MINMAXUNIT
VoltageVAC (converter not switching)-230V
VoltageVBUS (converter not switching)-222V
VoltagePMID (converter not switching)-0.322V
VoltageSW-0.316V
VoltageBAT, SYS (converter not switching)-0.37V
VoltageBTST-0.322V
VoltageACDRV-0.340V
VoltageD+. D-, STAT, OTG, PG, ILIM, CE, ICHG, TS, VSET-0.37V
Output Sink CurrentSTAT, PG6mA
T JJunction temperature-40150°C
T stgStorage temperature-55150°C

over operating free-air temperature range (unless otherwise noted)

MINNOMMAXUNIT
V VBUSInput voltage413.5V
V BATBattery voltage4.35V
I VBUSInput current3.2A
I SWOutput current (SW)3.2A
I BATFast charging current3A
I BATRMS discharge current6A
T AAmbient temperature-4085°C

BQ25616JRTWR Thermal Information

THERMAL METRIC (1)THERMAL METRIC (1) - (1) )BQ25616/BQ25616J RTW (WQFN) - 24 PinsUNIT
R θJAJunction-to-ambient thermal resistance (JEDEC31.9°C/W
R θJC(top)Junction-to-case (top) thermal resistance27°C/W
R θJBJunction-to-board thermal resistance9.2°C/W
Ψ JTJunction-to-top characterization parameter0.4°C/W
Ψ JBJunction-to-board characterization parameter9.2°C/W

BQ25616JRTWR Typical Application

A typical application consists of the device configured as a stand-alone power path management device and a single cell battery charger for Li-ion and Li-polymer batteries used in a wide range of smart phones and other portable devices. It integrates an input reverse-block FET (RBFET, Q1), high-side switching FET (HSFET, Q2), low-side switching FET (LSFET, Q3), and battery FET (BATFET Q4) between the system and battery. The device also integrates a bootstrap diode for the high-side gate drive.

External ACFET is optional. When external OVP is not used, short the VBUS and VAC pins and allow the ACDRV pin to float.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
BQ25616Texas InstrumentsWQFN-24 4x4mm
BQ25616/616JTexas Instruments—
BQ25616/JTexas Instruments—
BQ25616JTexas InstrumentsWQFN (24)
BQ25616JRTWR.ATexas Instruments—
BQ25616JRTWTTexas Instruments—
BQ25616JRTWT.ATexas Instruments—
BQ25616RTWRTexas Instruments24-WFQFN Exposed Pad
BQ25616RTWR.ATexas Instruments—
BQ25616RTWTTexas Instruments
BQ25616RTWT.ATexas Instruments—

More datasheets

All Texas Instruments datasheets (2,670)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the BQ25616JRTWR

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the BQ25616JRTWR run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.