Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

ADXL375BCCZ-RL

3-Axis Digital MEMS Accelerometer

The ADXL375BCCZ-RL is a 3-axis digital mems accelerometer from Analog Devices. View the full ADXL375BCCZ-RL datasheet below including key specifications, absolute maximum ratings.

ADXL375BCCZ-RL shares its datasheet with ADXL375, whose page lists every part number it covers.

Official ADXL375BCCZ-RL datasheet (PDF) — the source this page was extracted from.

Manufacturer

Analog Devices

Category

3-Axis Digital MEMS Accelerometer

Package

14-VFLGA

ADXL375BCCZ-RL Key Specifications

ParameterValue
Acceleration Range±200g
AxisX, Y, Z
Bandwidth0.05Hz ~ 1.6kHz
FeaturesAdjustable Bandwidth, Sleep Mode, Temperature Sensor
Mounting TypeSurface Mount
Operating Temperature-40°C ~ 85°C
Output TypeI2C, SPI
Package / Case14-VFLGA
PackagingMouseReel
Sensitivity (LSB/g)20.5
Standard Pack Qty5000
Supplier Device Package14-LGA (3x5)
TypeDigital
Supply Voltage2V ~ 3.6V

ADXL375BCCZ-RL Overview

Part: ADXL375BCCZ — Analog Devices

Type: 3-Axis Digital MEMS Accelerometer (high-g)

Description: ±200 g, 3-axis digital MEMS accelerometer with 16-bit output, SPI/I²C interface, 32-level FIFO, and 35 μA typical supply current at low data rates (VS = 2.5 V).

Operating Conditions:

  • Supply voltage (VS): 2.0–3.6 V
  • Interface voltage (VDD I/O): 1.7 V to VS
  • Operating temperature: -40 to +85 °C
  • Output data rate: 0.1–3200 Hz (bandwidth = ODR/2)

Absolute Maximum Ratings:

  • Max supply voltage (VS, VDD I/O): -0.3 V to +3.9 V
  • Digital pins: -0.3 V to VDD I/O + 0.3 V or 3.9 V, whichever is less
  • Acceleration, any axis (powered or unpowered): 10,000 g
  • Powered temperature range: -40 to +105 °C
  • Storage temperature: -40 to +105 °C

Key Specs:

  • Measurement range: ±180 g min, ±200 g typ
  • Sensitivity (ODR ≤ 800 Hz): 18.4 / 20.5 / 22.6 LSB/g (min/typ/max); scale factor 44 / 49 / 54 mg/LSB
  • Sensitivity change due to temperature: ±0.02 %/°C typ
  • 0 g offset: ±400 mg typ (-6000 to +6000 mg); offset vs. temperature ±10 mg/°C typ
  • Noise: 5 mg/√Hz typ
  • Supply current in measurement mode: 145 μA typ (ODR ≥ 100 Hz), 35 μA typ (ODR ≤ 3 Hz)
  • Standby current: 0.1 μA typ
  • Turn-on/wake-up time: 1.4 ms typ (ODR = 3200 Hz)
  • Self-test Z-axis output change: 6.4 g typ
  • Thermal resistance (14-terminal LGA): θJA 150 °C/W, θJC 85 °C/W

Features:

  • Power consumption scales automatically with bandwidth
  • Embedded 32-level FIFO buffer
  • Bandwidth selectable via serial command
  • Shock event detection and activity/inactivity monitoring
  • SPI (3- or 4-wire) and I²C digital interfaces
  • 10,000 g shock survival
  • Pb free/RoHS compliant

Applications:

  • Concussion and head trauma detection
  • High force event detection

Package:

  • 14-lead LGA, 3 mm × 5 mm × 1 mm

ADXL375BCCZ-RL Features

Low power: as low as 35 μA in measurement mode and 0.1 μA in standby mode at VS = 2.5 V Power consumption scales automatically with bandwidth Embedded, 32-level FIFO buffer minimizes processor load Bandwidth of up to 1 kHz

Bandwidth selectable via serial command Shock event detection Activity/inactivity monitoring Supply voltage range: 2.0 V to 3.6 V I/O voltage range: 1.7 V to VS SPI (3- or 4-wire) and I 2 C digital interfaces Wide temperature range: -40°C to +85°C 10,000 g shock survival Pb free/RoHS compliant

Small and thin: 3 mm × 5 mm × 1 mm LGA package

ADXL375BCCZ-RL Applications

Concussion and head trauma detection High force event detection

ADXL375BCCZ-RL Pin Configuration

Figure 3. Pin Configuration

Figure 3. Pin Configuration

Table 5. Pin Function Descriptions

Pin No.MnemonicDescription
1V DD I/ODigital Interface Supply Voltage.
2GNDGround. This pin must be connected to ground.
3RESERVEDReserved. This pin must be connected toV S or left open.
4GNDGround. This pin must be connected to ground.
5GNDGround. This pin must be connected to ground.
6V SSupply Voltage.
7CSChip Select.
8INT1Interrupt 1 Output.
9INT2Interrupt 2 Output.
10NCNot Internally Connected.
11RESERVEDReserved. This pin must be connected to ground or left open.
12SDO/ALT ADDRESSSPI 4-Wire Serial Data Output (SDO)/I 2 C Alternate Address Select (ALT ADDRESS).
13SDA/SDI/SDIOI 2 C Serial Data (SDA)/SPI 4-Wire Serial Data Input (SDI)/SPI 3-Wire Serial Data Input and Output (SDIO).
14SCL/SCLKI 2 C Serial Communications Clock (SCL)/SPI Serial Communications Clock (SCLK).

ADXL375BCCZ-RL Absolute Maximum Ratings

Table 2.

ParameterRating
Acceleration, Any Axis Unpowered10,000 g
Powered10,000 g
V S-0.3V to +3.9V
V DD I/O-0.3V to +3.9V
Digital Pins-0.3V toV DDI/O + 0.3V or 3.9 V, whichever is less
Output Short-Circuit Duration (Any Pin to Ground)Indefinite
Temperature Range
Powered-40°C to +105°C
Storage-40°C to +105°C

Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ADXL375BCCZ-RL Thermal Information

θJA is specified for the worst-case conditions, that is, a device soldered in a circuit board for surface-mount packages.

Table 3. Package Characteristics

PackageTypeθ JAθ JCUnit
14-Terminal LGA15085°C/W

ADXL375BCCZ-RL Package Information

Figure 39 and Table 19 provide information about the package branding for the ADXL375.

11669-102

Figure 39. Product Information on Package (Top View)

Table 19. Package Branding Information

Branding KeyField Description
375BPart identifier for the ADXL375
#RoHS-compliant designation
ywwDate code
vvvvFactory lot code
CNTYCountry of origin

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
ADXL375Analog Devices—
ADXL375BCCZAnalog Devices14-VFLGA
ADXL375BCCZ-RL7Analog Devices Inc.14-VFLGA

More datasheets

All Analog Devices datasheets (757)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the ADXL375BCCZ-RL

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the ADXL375BCCZ-RL run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.