ADXL375
3-Axis Digital MEMS AccelerometerThe ADXL375 is a 3-axis digital mems accelerometer from Analog Devices. View the full ADXL375 datasheet below including key specifications, absolute maximum ratings.
Official ADXL375 datasheet (PDF) — the source this page was extracted from.
Manufacturer
Analog DevicesCategory
3-Axis Digital MEMS Accelerometer
ADXL375 Key Specifications
| Parameter | Value |
|---|---|
| -3db Bandwidth | 1.6 kHz |
| Acceleration Range | ±200g |
| Axis | X, Y, Z |
| Axis | X, Y, Z |
| Bandwidth | 50 mHz |
| Bandwidth | 0.05Hz ~ 1.6kHz |
| Case/Package | LGA |
| Contact Plating | Gold |
| Features | Adjustable Bandwidth, Sleep Mode, Temperature Sensor |
| Frequency | 1 kHz |
| Height | 1 mm |
| Interface | I2C, SPI |
| Lead Free | Contains Lead |
| Length | 5 mm |
| Lifecycle Status | Production (Last Updated: 18 hours ago) |
| Manufacturer Lifecycle Status | PRODUCTION (Last Updated: 18 hours ago) |
| Max Operating Temperature | 85 °C |
| Max Supply Voltage | 3.6 V |
| Min Operating Temperature | -40 °C |
| Min Supply Voltage | 2 V |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Nominal Supply Current | 145 µA |
| Number of Pins | 14 |
| Operating Supply Current | 145 µA |
| Operating Temperature | -40°C ~ 85°C |
| Output Type | Digital |
| Output Type | I2C, SPI |
| Package / Case | 14-VFLGA |
| Packaging | Tray |
| REACH SVHC | Unaffected |
| Resolution | 2 B |
| RoHS | Compliant |
| Schedule B | 9031808080, 9031808080|9031808080, 9031808080|9031808080|9031808080, 9031808080|9031808080|9031808080|9031808080 |
| Sensitivity (LSB/g) | 20.5 |
| Standard Pack Qty | 490 |
| Supplier Device Package | 14-LGA (3x5) |
| Type | Digital |
| Supply Voltage | 2V ~ 3.6V |
| Width | 3 mm |
ADXL375 Overview
Part: ADXL375BCCZ — Analog Devices
Type: 3-Axis Digital MEMS Accelerometer (high-g)
Description: ±200 g, 3-axis digital MEMS accelerometer with 16-bit output, SPI/I²C interface, 32-level FIFO, and 35 μA typical supply current at low data rates (VS = 2.5 V).
Operating Conditions:
- Supply voltage (VS): 2.0–3.6 V
- Interface voltage (VDD I/O): 1.7 V to VS
- Operating temperature: -40 to +85 °C
- Output data rate: 0.1–3200 Hz (bandwidth = ODR/2)
Absolute Maximum Ratings:
- Max supply voltage (VS, VDD I/O): -0.3 V to +3.9 V
- Digital pins: -0.3 V to VDD I/O + 0.3 V or 3.9 V, whichever is less
- Acceleration, any axis (powered or unpowered): 10,000 g
- Powered temperature range: -40 to +105 °C
- Storage temperature: -40 to +105 °C
Key Specs:
- Measurement range: ±180 g min, ±200 g typ
- Sensitivity (ODR ≤ 800 Hz): 18.4 / 20.5 / 22.6 LSB/g (min/typ/max); scale factor 44 / 49 / 54 mg/LSB
- Sensitivity change due to temperature: ±0.02 %/°C typ
- 0 g offset: ±400 mg typ (-6000 to +6000 mg); offset vs. temperature ±10 mg/°C typ
- Noise: 5 mg/√Hz typ
- Supply current in measurement mode: 145 μA typ (ODR ≥ 100 Hz), 35 μA typ (ODR ≤ 3 Hz)
- Standby current: 0.1 μA typ
- Turn-on/wake-up time: 1.4 ms typ (ODR = 3200 Hz)
- Self-test Z-axis output change: 6.4 g typ
- Thermal resistance (14-terminal LGA): θJA 150 °C/W, θJC 85 °C/W
Features:
- Power consumption scales automatically with bandwidth
- Embedded 32-level FIFO buffer
- Bandwidth selectable via serial command
- Shock event detection and activity/inactivity monitoring
- SPI (3- or 4-wire) and I²C digital interfaces
- 10,000 g shock survival
- Pb free/RoHS compliant
Applications:
- Concussion and head trauma detection
- High force event detection
Package:
- 14-lead LGA, 3 mm × 5 mm × 1 mm
ADXL375 Features
Low power: as low as 35 μA in measurement mode and 0.1 μA in standby mode at VS = 2.5 V Power consumption scales automatically with bandwidth Embedded, 32-level FIFO buffer minimizes processor load Bandwidth of up to 1 kHz
Bandwidth selectable via serial command Shock event detection Activity/inactivity monitoring Supply voltage range: 2.0 V to 3.6 V I/O voltage range: 1.7 V to VS SPI (3- or 4-wire) and I 2 C digital interfaces Wide temperature range: -40°C to +85°C 10,000 g shock survival Pb free/RoHS compliant
Small and thin: 3 mm × 5 mm × 1 mm LGA package
ADXL375 Applications
Concussion and head trauma detection High force event detection
ADXL375 Pin Configuration
Figure 3. Pin Configuration
Figure 3. Pin Configuration
Table 5. Pin Function Descriptions
| Pin No. | Mnemonic | Description |
|---|---|---|
| 1 | V DD I/O | Digital Interface Supply Voltage. |
| 2 | GND | Ground. This pin must be connected to ground. |
| 3 | RESERVED | Reserved. This pin must be connected toV S or left open. |
| 4 | GND | Ground. This pin must be connected to ground. |
| 5 | GND | Ground. This pin must be connected to ground. |
| 6 | V S | Supply Voltage. |
| 7 | CS | Chip Select. |
| 8 | INT1 | Interrupt 1 Output. |
| 9 | INT2 | Interrupt 2 Output. |
| 10 | NC | Not Internally Connected. |
| 11 | RESERVED | Reserved. This pin must be connected to ground or left open. |
| 12 | SDO/ALT ADDRESS | SPI 4-Wire Serial Data Output (SDO)/I 2 C Alternate Address Select (ALT ADDRESS). |
| 13 | SDA/SDI/SDIO | I 2 C Serial Data (SDA)/SPI 4-Wire Serial Data Input (SDI)/SPI 3-Wire Serial Data Input and Output (SDIO). |
| 14 | SCL/SCLK | I 2 C Serial Communications Clock (SCL)/SPI Serial Communications Clock (SCLK). |
ADXL375 Absolute Maximum Ratings
Table 2.
| Parameter | Rating |
|---|---|
| Acceleration, Any Axis Unpowered | 10,000 g |
| Powered | 10,000 g |
| V S | -0.3V to +3.9V |
| V DD I/O | -0.3V to +3.9V |
| Digital Pins | -0.3V toV DDI/O + 0.3V or 3.9 V, whichever is less |
| Output Short-Circuit Duration (Any Pin to Ground) | Indefinite |
| Temperature Range | |
| Powered | -40°C to +105°C |
| Storage | -40°C to +105°C |
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ADXL375 Thermal Information
θJA is specified for the worst-case conditions, that is, a device soldered in a circuit board for surface-mount packages.
Table 3. Package Characteristics
| PackageType | θ JA | θ JC | Unit |
|---|---|---|---|
| 14-Terminal LGA | 150 | 85 | °C/W |
ADXL375 Package Information
Figure 39 and Table 19 provide information about the package branding for the ADXL375.
11669-102
Figure 39. Product Information on Package (Top View)
Table 19. Package Branding Information
| Branding Key | Field Description |
|---|---|
| 375B | Part identifier for the ADXL375 |
| # | RoHS-compliant designation |
| yww | Date code |
| vvvv | Factory lot code |
| CNTY | Country of origin |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| ADXL375BCCZ | Analog Devices | 14-VFLGA |
| ADXL375BCCZ-RL | Analog Devices | 14-VFLGA |
| ADXL375BCCZ-RL7 | Analog Devices Inc. | 14-VFLGA |
More datasheets
Ask your AI agent about the ADXL375
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the ADXL375 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.